American Audio CDMp3 PLAYER Radius 3000 User Manual

 BASIC OpERATIONS (CONT.)
2) Press the in Button 
 (15). This will set the 
 starting point of the 
 SEAMLESS LOOP. The 
 in Button (15) LED 
 will flash then glow.
1) Press play/pauSe   
 Button  (13) to     
 activate playback 
 mode.      
Figure 17Figure 16
©American Audio®   -   www.AmericanAudio.us   -   Radius 3000™ Instruction Manual Page 21
Figure 15Figure 14
Storing A Cue Point:
Once you have set your CUE Point by one of the two means listed on page 20, you may store your cue point 
in  one...

 BASIC OpERATIONS (CONT.)
3) Press the out Button (15) to set the ending point for your SEAMLESS 
 LOOP (Figure 17). The in Button (15) and out Button (15) LEDs will 
 immediately begin to flash rapidly, indicating the SEAMLESS LOOP mode   
 has been activated.
VFD  LOOP  INDICATORS -  During  a  seamless  loop,  the reloop  indica-
tor (58) will turn on in the Vfd  diSplay (3) indicating a loop is active. 
ExITING  A LOOP  - To  exit  a  SEAMLESS  LOOP,  press  the out 
Button (15). The in Button (15)...

 BASIC OpERATIONS (CONT.)
Figure 22Figure 21
Figure 23
6) Your sample can now be recalled at any time even
 when the unit is in PAUSE MODE. To recall the     
 sample be sure the sample function is on, by press- 
 ing the Sample Button (27). The blue sample
 button LED will turn on. To play your sample in a 
 continuos loop leave the sample function on. To   
   play your sample just once, turn the sample func- 
 tion off immediately after initiating your sample. 
 With the sample function on the sample...

Changing the Sample Parameters: 
Changing  the  sample  parameters  allows  you  to  change  the  sample's  volume  and  pitch.  A  higher 
value  will  increase  the  pitch  percentage  or  volume.  It's  important  to  understand  that  the  pitch  value 
is  basically  a  speed  adjustment  and  has  nothing  to  do  with  tonal  quality.  The  values  can  be  either  a 
momentary  change  or  set  adjustment.  The  sample  values  are  changed  in  three  easy  steps,  while  in 
sample...

 BASIC OpERATIONS (CONT.)
Figure 28
©American Audio®   -   www.AmericanAudio.us   -   Radius 3000™ Instruction Manual Page 25
13.  Bank Buttons (28): 
These buttons are used to store your samples and cue points. Only a sample or 
a cue point can be stored into each of these four banks. When a sample is stored 
in of the banks you may use the sample starting point as a cue point. The Bank 
ButtonS (28) instantly recall and play any of your stored samples or cue points 
without  interrupting  music...

©American Audio®   -   www.AmericanAudio.us   -   Radius 3000™ Instruction Manual Page 26
 BASIC OpERATIONS (CONT.)
TIME BAR INDICATOR  (53) -  Details  the  time  defined  in  the time  meter  (54) as  a  visual  bar  icon.  As  with 
the time meter (54) this bar is also dependent on the selected time function [total remain,  remain or 
elapSed].  This  bar  will  begin  to  flash  when  a  track  is  ending  regardless  of  which  time  function  you  are  in. 
Use the flashing bar as a visual...

Figure 32
JOG  WHEEL  TOUCH  SENSITIVITY: This  function  works  with  the  SCRATCH  effects.  This  function  allows 
the play and cue commands to be controlled by tapping on the touch sensitive jog wheel. 
ADJUSTING  JOG  WHEEL  TOUCH  SENSITVITY: The  degree  of  sensitivity  can  be  adjusted  to  make  it 
more or less sensitive. Press and hold the folder knoB (20) to enter the INTERNAL MENU. Turn the time 
or ratio knoBS  (31  &  25)  clockwise  till  SENSITIVITY  is  displayed. Press  the time...

 pITCH  ADJUSTmENTS
©American Audio®   -   www.AmericanAudio.us   -   Radius 3000™ Instruction Manual Page 28
1. pITCH SLIDER (4):
This  function  will  increase  or  decrease  the  tracks  playback  speed  or  "PITCH." 
The  maximum  pitch  percentage  manipulation  in  this  function  is  +/-100%.  The 
pitch  Slider  (4) is  used  to  decrease  or  increase  the  playback  pitch.  If  the 
slider  is  moved  up  (towards  the  top  of  the  unit)  the  pitch  will  decrease,  if  the 
slider...

 pITCH  ADJUSTmENTS
©American Audio®   -   www.AmericanAudio.us   -   Radius 3000™ Instruction Manual Page 29
2. pITCH BENDINg: 
Unlike  the pitch  Slider  (4)  adjustment  this  function  will momentarily  increase  or  decrease  a  tracks  speed 
during playback. There are two ways to operate this function, with the (-) & (+) pitch  Bend ButtonS (5) or 
with  the jog Wheel  (9).  The  maximum  pitch  bend  percentage  allowed  is  +/-  100%.  The  pitch  bend  func-
tion will work in conjunction with...

 pITCH  ADJUSTmENTS
©American Audio®   -   www.AmericanAudio.us   -   Radius 3000™ Instruction Manual Page 30
Figure 41
3. JOg  WHEEL  (9):
The jog Wheel will temporarily bend the pitch if a track is in playback mode 
Rotating  the  wheel  in  a  clockwise  direction  will  increase  your  track  pitch 
and  rotating  the  wheel  in  a  counter-clockwise  direction  will  decrease  your 
track  pitch.  The  speed  you  rotate  the jog  Wheel  will  determine  pitch  bend 
percentage  (%).  For  example,...