Ampro Corporation Ampro Projector 5200 User Manual
Here you can view all the pages of manual Ampro Corporation Ampro Projector 5200 User Manual. The Ampro Corporation manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
49 5200 User’s Manual Lamp Module DisposalThe lamp inside the lamp module is under great pressure. DO NOT incinerate. ! WARNING! Eye protection should be worn when working with the lamp to avoid injury from metal particles. If Desired, pressure can be relieved by any means of breaking the copper tubular seal on the back of the lamp. Pliers and wire cutters work well to break the seal. Lamps can be discarded as landfill garbage. However, the lamp operation timer contains a small amount of mercury and...
Page 52
50 5200 User’s Manual ALICE Help Guide 1 If your ALICE projector operating system is not working as expected, and you are not sure of what to do, start with this guide. This guide directs you through some initial checks and basic troubleshooting. Start Symbol – Indicates the beginning of a help map.Off-Page-Connector – Connects parts of a help map that extends across two or more pages. Help Chart Conventions Process Box – Encloses an action that needs to be performed.Document – refers to a document or...
Page 53
ALICE Help Guide 1 51 5200 User’s Manual Flow Chart 1Boot-Up Problem Did thesystem boot properly Press DELETE to enter the main BIOS screen Are thesettingscorrect? Correct the settings SeeBIOSConfigurationProcedure Is theproblemresolved? No No Turn the projector off (toggle the main AC switch off).Disconnect the main AC power cord from the projector.Lossen the two captive screws located on either side of the projector towards the front.Lift up and lock the top cover in place.Remove the PC cover-remove...
Page 54
ALICE Help Guide 1 52 5200 User’s Manual Flow Chart 2 Did the system boot correctlyYES Does Windows 95 Start properly Re-boot the system and enter the Windows 95Safe Mode of operation (press F8 at the StartingWindows 95 message.) NO Did thesystem restart in Safe Mode See Safe Mode Operation No YES Did the MindPath and/or the ALICE program st art. Does it start in SAFE MODE of operation NO YES Contact the manufacturer for additional help. NO YES 2 1 3 Click START then RUNType SYSEDIT then click OKClose...
Page 55
ALICE Help Guide 1 53 5200 User’s Manual Flow Chart 3 Does the IR Remote/Mouse work properly Does the IR Keyboard and Mouse work properly Are the batteries good. Repl ace t he batteries NO Does the IR Remote/Mouse work properly Are the batteries good. Is the Remote receiver connected to the correct port No Turn the projector offToggle main AC offDisconnect main AC plug.Connect properly and reboot NO Does the IR Remote/Mouse work properly now Remote/Mouse Problem Keyboard/Mouse Problem NO Repl ace t he...
Page 56
ALICE Help Guide 1 54 5200 User’s Manual BIOS ConfigurationPress to enter the main BIOS screen and check the following parameters IDD HDD AUTO DETECTION Select the setting that includes LBA mode Press three more times and answer NO to each prompt. STANDARD CMOS SETUP Be sure primary type = user, mode = LBA, and reported drive size corresponds to actual drive size. Enter correct date and time Set HALT ON to NO ERRORS Set drive A to 1.44M, 3.5 in. Set VIDEO to EGA/VGA BIOS...
Page 57
ALICE Help Guide 1 55 5200 User’s Manual Safe Mode OperationWindows® 95 will automatically initiate Safe Mode if it detects that the system start-up has failed, for example if the Registry is corrupted, or an application has requested Safe Mode. Sporadically, Windows® 95 will start Safe Mode for no apparent reason. If this is the case, simply rebooting the system will resolv e the problem. To access Windows® 95 Startup Menu, when you see the message “Starting Windows 95 ,” press F8. At times, simply...
Page 58
AmPro Corporate Office and Florida Operations 525 John Rodes Boulevard Melbourne, FL 32934 Phone: 407-254-3000 Toll Free: 800-254-3001 Fax: 407-253-3001 E-mail: [email protected] or [email protected] AmPro Light Valve Products 420 N. Bernardo Avenue Mountain View, CA 94043 Phone: 650-962-8281 Fax: 650-962-8295 AmPro Prosumer Products 175-G New Boston Street Woburn, MA 01801 Phone: 781-932-4800 Toll Free: 800-556-7733 Fax: 781-932-8756 AmPro Europe Glebelands House...
All Ampro Corporation manuals