AMT Datasouth Printer Accel 7350 User guide

Chapter 2 
Page 30 of 46 
9. EJECT/LOAD 
 
 
 
●If the EJECT/LOAD key is press ed when fanfold paper is loaded, the 
 
 
 
paper is fed back to the parking positi on. When it is pressed when a cut 
sheet paper is loaded, the paper is ejected.  
●When the EJECT/LOAD key is press ed when fanfold paper is at the 
parking position, the paper is loaded to the TOF position.  
●When the EJECT/LOAD key is pr essed with no paper in the manual 
mode, AUTO SKEW mode is turned on  and off. When it is pressed with...

Chapter 2 
 
3. LCD  
Current paper path and the User No. are displayed.  
 
  
 
Front tractor 
 
 
 
  
 
Manual/Cut Sheet 
 
 
 
  
 
Rear tractor 
 
 
   
 
Cut Sheet Feeder 
 
 
 
 
 
 
 
Page 31 of 46  

Chapter 2 
4. Lamps (LED Indicators) 
ON: Printing is enabled. ONLINE (Green)       
OFF:  Printing is disabled. 
Blinking:  The cover is open, or the printer is in the 
 head temperature protect mode. 
              
ON:  LQ speed printing.  SLOW FL ASH: Draft printing     SPEED (Green)      
OFF: NORMAL MQ speed printing. 
FAST FLASH: HIGH 2 (High Speed) Draft printing. 
 
ON:  No paper is detected or other operational error 
 occurred. ERROR (Amber) 
OFF:  No error is detected. 
Blinking:  A...

Chapter 2 
 
• Paper path lever 
The lever for changing the paper path.  
 
 
 Position Paper path 
 
Front tractor  F
Manual/Cut Sheet 
 
 
 
 
 
 
Rear tractor 
 
Cut Sheet Feeder 
 
The required paper path can be select ed by the setting of the lever. 
The paper path command is valid when selecting the “AUTO”. 
The lever position should be at “AUTO” when using the printer driv\
er. 
Before changing the paper path, remove  the paper inside the printer by 
pressing the EJECT/LOAD key. 
 
 
 
 
Page 33...

Chapter 2 
• Head adjustment lever   
7
1 
AUTOThis lever is for adjusting the gap between 
the print head and the paper. 
 
 
 
 
 
 
 
 
 
The lever position should be at AUTO  normally, which adjusts the gap \
in 
accordance with the SETUP MODE. When  AUTO  is selected on the panel, 
the printer measures the paper thickness and adjusts the gap between the print 
head and the paper automatically. 
1  HEAD ADJUSTMENT  
 
 
 
In case that the graduation 1 - 7  is selected, the gap between print head and...

Chapter 3 
• How to use the setup modes  
The printer has setup modes, i.e., function setting modes that are unique to this 
printer. The setup modes enable various  printer functions to be set up with the 
function keys on the operation panel. 
This section provides an out line of the setup modes and  the details of the setup 
functions. 
 
1. Keys used for setting  
1. Menu key  
Press the ALT+MENU key  to enter the MENU MODE. 
 
+   
 
 
2. Menu selection keys 
These keys are used to change the...

Chapter 3 
2. Setting example  
The following is the example to change the page length of fanfold paper from 11 
to 8 inch. 
 
1. Press the MENU key while depressing the ALT key. 
   
 
 
2. Select #6 with the  or  key. 
 
 
 
3. Press the  key. 
 
 
 
 
4. Press the  or  key to display 8 INCH on the LCD. 
 
 
 
 
5. Press the ENTER key. 8 INCH is marked with on asterisk. 
 
 
 
 
 
 
 
6. Press the MENU key. The setting is  automatically saved and the printer is 
initialized. 
 
 
 
 
 
 
  1  HEAD...

Chapter 4 
• How to use set Power Up User Format  
This printer has a total of 6 User Formats. Various SETUP Modes as described 
in Chapter 3.1 & 3.2 can be saved in each of the 6 User Formats. 
 
Menu “18 PWR UP AS” can be used to sele ct one of the 6 User Formats as the 
Power Up Default. The Power up user form at is normally identified with a number 
on the LCD display as shown below. 
 
 
Indicating the printer is set to User
  Format 1 as power up default. 
 
 
 
 
 
 
 
 
Page 37 of 46  

Chapter 5 
• How to solve the problem  
1. Printing speed is slow . 
 
Push the key SPEED and sele ct the mode High-speed. 
 
LQ  NORMAL 
   
HIGH 2  DRAFT 
 
2. Printing is light   
 
Check the condition of ribbon cassette. 

Chapter 5 
5. The message PAPER JAM appears, though paper is not jammed . 
 
The paper jam sensor may not function properly if the sensors on the tractors 
are exposed to a direct light or sunlight.