AMT Datasouth Printer Accel 7350 User guide

							
Chapter 5 
9. Unexpected printing results . 
A gap occurs between the print star t position and the top end of paper. 

						

							
Chapter 5 
2. Operational error message  
 
 
• The print head is being cooled to 
prevent it from overheating. The 
ONLINE lamp blinks. 
 
The print head has become too hot 
during high-density printing. When this 
message is displayed, the printing speed 
is reduced or printing stops. When the 
print head temperature drops, the printer 
restarts printing. 
 
 
 
• This error message indicates that 
fanfold paper is not fed back into the 
tractor assembly properly. 
 
Cut the paper to remove it.  
 
 
Fanfold paper is not set on the front tractor. 
Install fanfold paper on the front tractor and 
press the ONLINE key. 
 
 
Fanfold paper is not set on the rear tractor. 
Install fanfold paper on the rear tractor and 
press the ONLINE key. 
 
A cut sheet is not loaded into the printer. 
Put a cut sheet on the front rack and load it 
into the printer. 
 
A cut sheet is not set into the CSF. Install 
cut sheets into the CSF and press the 
ONLINE key.  
 
 
Page 41 of 46  
						

							
Chapter 5 
 
 
A paper jam occurs at the front tractor. 
Pull the ejected paper outward gently 
and press the  
ONLINE key to restart printing. 
When the PAPER JAM still remains, 
remove all paper and reinstall the paper 
into the tractor properly and press the 
ONLINE key. 
Re-adjust the gap between the print 
head and the paper, by menu #1 HEAD 
ADJUSTMENT. When the paper 
thickness may be not constant, set YES 
at menu #45 LF STABLE. When the 
PAPER JAM appears despite no actual 
paper jamming, set NO at menu #39 
PAPER JAM DETECT. 
 
 
 
 
A paper jam occurs at the rear tractor. 
See the above column of PAPER JAM 
FRONT TR for troubleshooting. 
 
 
 
 
 
 
 
 
Fanfold paper is not fed properly. 
Remove the paper and reinstall the paper 
into the tractor properly. 
 
 
 
A cut sheet is not ejected properly. 
Remove the paper manually. 
 
Page 42 of 46  
						

							
Chapter 5 
Page 43 of 46 
 
 
 • This error occurs if the printer detects 
that a cut sheet paper is manually loaded 
with excessiveskew. 
• The ERROR lamp blinks, and the buzzer 
sounds three times.  The paper is ejected 
and the printer enters the offline state. 
 
Load paper again. If it is loaded straight, 
the printer enters the online state. 
 
 
 
• This error occurs if the front cover is 
opened. The ONLINE lamp blinks. 
 
Closing the front cover will remove the 
cause of this error. The printer is in the 
offline state while the cover is opened
. 
 
CAUTION 
Never open the front cover during printing. 
Press the ONLINE key to stop printing and then open 
the front cover. 
 
 
 
 
• The jam sensor is defective when 
loading fanfold  
Press the ONLINE key to recover the 
printer from this error. 
 
The paper jam detection function is 
disabled. 
Remove paper dust from the jam sensor, 
and load fanfold paper again. 
The paper jam sensor may not function 
properly when the sensor is exposed to a 
direct light or sunlight especially when 
using the rear tractor. 
 
 
  
						

							
Chapter 6 
Page 44 of 46 
 
 
• Printer specifications   
Printing Method  Serial impact dot matrix  
Print Head  24pin  
Maximum column  136 columns (10cpi)  
Print speed  LQ  150 CPS (10cpi) 
 NORMAL (NLQ)  200 CPS (10cpi) 
 DRAFT (HQDR)  300 CPS (10cpi) 
 High 2 (HS Draft)  400 CPS (10cpi) 
 SSD  600 CPS (15cpi) 
Multipart printing  Standard  1+5p 
 
 
DARK  1+7p 
Line feed speed  36 LPI  
Line feed pitch  1/360 INCH  
Paper path  Front tractor or rear tractor  
 Manual or notebook 
 CSF (option)  
Head adjustment  AUTO, FIX  
Interface  Parallel, (bidirectional; IEEE 1284, nibble 
mode)  
 Serial  
Input buffer  64 k byte  
Emulation  EPSON LQ-2550™  
 IBM 2391™  
Other functions  Barcode function  
 Enlarged character  
Font typeface  10 styles  
USER Formats  6  
 
 
 
 
 
 
 
  
						

							
Chapter 6 
• Other specifications   
Power supply  AC 120 V, 60Hz (USA and Canada)  
 AC 220-240V, 50-60Hz (Europe and Asia)  
Power consumption  Draft self 170watt
s 2.3A (120VAC) 1.3A(220-240VAC) 
 Stand-by 40watts 0.6A (120VAC) 0.4A(220-240VAC) 
 Energy Star 15watts  
5 to 40o(41 to 104o)  Operating temperature  
Operating humidity  20 to 80% (No condensation)  
Dimensions  25”(W) x 18.3”(D) x 11.6”(H)  
Weight  50 lbs  
 • Paper specifications  
Available paper size   
• Fanfold paper  Paper width 8”~15”  
 Paper thickness 0.003”~ 0.005”  
 Paper quality Wood-free paper  
  
• Fanfold paper  Paper width 8”~15” 
    multipart forms  Number of sheet 8 or less  
 Paper thickness 0.005~0.020”  
 Paper quality non-carbon equivalent  
  
• Cut sheet paper  Paper width 7.2”~17” 
   Manual mode  Paper length 7.2”~17”  
 Paper thickness 0.003”~0.005”  
 Paper quality Wood-free paper  
  
• Cut sheet paper  Paper width 7.2”~17” 
   multipart forms mode  Paper length 7.2”~17”  
 Number of sheet 8 or less  
 Paper thickness 0.005”~0.020”  
 Paper quality non-carbon equivalent  
  
• Card, Manual mode  Paper width 7.2”~17”  
 Paper length 7.2”~17”  
 Paper thickness 0.003”~.079”  
  
 • Options&Consumable  
• Cut Sheet Feeder    
• Ribbon cassette   
   
  
Page 45 of 46  
						

							
 
 
AMT Datasouth Corporation 
803 Camarillo Springs Road, Suite #D 
Camarillo CA,  93012 1-800-215-9192 
Page 46 of 46