Anaheim Stepper 17MDSI Series Users Guide
View the Anaheim Stepper 17MDSI Series Users Guide for free. All the Anaheim manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 2
General Description
The 17MDSI Series has a compact construction that integrates a simple in\
dexer/controller, microstepping
driver and a stepper motor in one stream line package. With the three parts combined into one casing,
the need to include motor wires has been eliminated. The high-torque step motor can generate up to 62
oz-in of torque. The microstepping driver will operate from voltages of 12VDC minimum to 35VDC maxi-
mum. The inputs are capable of running from either open collector, TTL...](http://img.usermanuals.tech/thumb/413/5908/w300_stepper-17mdsi-series-users-guide-1478874001_d-1.png "Page 2
General Description
The 17MDSI Series has a compact construction that integrates a simple in\
dexer/controller, microstepping
driver and a stepper motor in one stream line package. With the three parts combined into one casing,
the need to include motor wires has been eliminated. The high-torque step motor can generate up to 62
oz-in of torque. The microstepping driver will operate from voltages of 12VDC minimum to 35VDC maxi-
mum. The inputs are capable of running from either open collector, TTL...")
![Page 3
Control Inputs (Pin 4, 5, 6, 7):
Input 1, 2: Logic “1” (Open) = Not Active
Logic “0” (0VDC) = Active
Direction: Logic “1” (Open) = CW
Logic “0” (0VDC) = CCW
On/Off: Logic “1” (Open) = On
Logic “0” (0VDC) = Off
Note:
Open Inputs are inactive and internally pulled up to +5VDC for all 17MDS\
I models
Control Outputs (Pin 8):
Output 1: Open Drain Type Output, Vce (max) = 40VDC, Ic (max) = 50mA
This output will conduct current when active, and be open when not activ\
e. Current needs to be...](http://img.usermanuals.tech/thumb/413/5908/w300_stepper-17mdsi-series-users-guide-1478874001_d-2.png "Page 3
Control Inputs (Pin 4, 5, 6, 7):
Input 1, 2: Logic “1” (Open) = Not Active
Logic “0” (0VDC) = Active
Direction: Logic “1” (Open) = CW
Logic “0” (0VDC) = CCW
On/Off: Logic “1” (Open) = On
Logic “0” (0VDC) = Off
Note:
Open Inputs are inactive and internally pulled up to +5VDC for all 17MDS\
I models
Control Outputs (Pin 8):
Output 1: Open Drain Type Output, Vce (max) = 40VDC, Ic (max) = 50mA
This output will conduct current when active, and be open when not activ\
e. Current needs to be...")
