Anetsberger Brothers 14Inch Gas Fryer MX142E Discontinued User Manual

21
FR FRFR FR
FR
YER  YER YER  YER 
YER 
TR TRTR TR
TR
OUBLESHOO OUBLESHOOOUBLESHOO OUBLESHOO
OUBLESHOO
TING GUIDE  TING GUIDE TING GUIDE  TING GUIDE 
TING GUIDE (Continued)
PROBLEM CAUSE REMEDY
Main burners do not
ignite.  
(Continued)
Main burners do not
stop burning.1. Thermostat has failed.
2. Gas control valve has failed.1. Turn the thermostat control
knob to OFF.  If the burners
do not quit burning, the ther-
mostat has failed and must be
replaced.
2. Turn the gas control valve knob
to OFF.  If the...

22
FR FRFR FR
FR
YER  YER YER  YER 
YER 
TR TRTR TR
TR
OUBLESHOO OUBLESHOOOUBLESHOO OUBLESHOO
OUBLESHOO
TING GUIDE  TING GUIDE TING GUIDE  TING GUIDE 
TING GUIDE (Continued)
PROBLEM CAUSE REMEDY
Liquid shortening does
not reach the desired
temperature for frying.1. Low gas supply pressure [less than 6” W.C.
for natural gas; (11” W.C. for propane)
when 
all other gas-powered equipment is
operating], causing reduced heat from main
burners.
2. Low gas manifold pressure [less than 3½”
W.C. for natural gas;...

23
FR FRFR FR
FR
YER  YER YER  YER 
YER 
TR TRTR TR
TR
OUBLESHOO OUBLESHOOOUBLESHOO OUBLESHOO
OUBLESHOO
TING GUIDE  TING GUIDE TING GUIDE  TING GUIDE 
TING GUIDE (Continued)
PROBLEM CAUSE REMEDY
Liquid shortening does
not reach the desired
temperature for frying.
(Continued)
3. Loose knob on thermostat; or thermostat
requires calibration (temperature setting dif-
fers by about 10°F from measured shorten-
ing temperature).  
(Continued)
4. Thermostat setting is more than 20°F dif-
ferent than measured...

24
FR FRFR FR
FR
YER  YER YER  YER 
YER 
TR TRTR TR
TR
OUBLESHOO OUBLESHOOOUBLESHOO OUBLESHOO
OUBLESHOO
TING GUIDE  TING GUIDE TING GUIDE  TING GUIDE 
TING GUIDE (Continued)
PROBLEM CAUSE REMEDY
Basket does not lower,
when the timer control
pushbutton is pressed
after the timer control
knob is set to a time
value. 
(Continued)
5. Timer has failed.  (Continued)
6. Microswitch (controlling the lift motor) has
failed.5. 
(Continued)
button to start the timer opera-
tion.  If the basket does not
lower into...

25 Basket lowers and
raises, repeatedly.1. Lifting mechanism microswitch is improp-
erly positioned.1. Position the microswitch
properly.
FR FRFR FR
FR
YER  YER YER  YER 
YER 
TR TRTR TR
TR
OUBLESHOO OUBLESHOOOUBLESHOO OUBLESHOO
OUBLESHOO
TING GUIDE  TING GUIDE TING GUIDE  TING GUIDE 
TING GUIDE (Continued)
PROBLEM CAUSE REMEDY
Basket does not raise,
after the timer control
knob reaches a timer
value of 0 (zero).1. Lifting mechanism or  motor has failed.
 
 (Continued)
2. Microswitch has failed.
3. Timer...

26
FR FRFR FR
FR
YER  YER YER  YER 
YER 
TR TRTR TR
TR
OUBLESHOO OUBLESHOOOUBLESHOO OUBLESHOO
OUBLESHOO
TING GUIDE  TING GUIDE TING GUIDE  TING GUIDE 
TING GUIDE (Continued)
HEATING indicator is
off, while burners are
aflame.1. HEATING  indicator wiring problem.
2. Indicator has failed.1. Repair indicator wiring if a
problem is detected.  Other-
wise, the indicator is defective
and should be replaced.
2. Replace the HEATING indica-
tor.
Indicator portion of
POWER switch is
unlighted, while fryer is...

27
LIMITED WARRANTY
ANETSBERGER BROTHERS, INC., Northbrook, Illinois, USA, certifies
that all equipment of its manufacture is, to the best of its knowledge, free from
defective material and workmanship.
ANETSBERGER BROTHERS, INC., agrees to replace any integral part of
its equipment that proves defective within 15 months of date of original ship-
ment from the factory, or 12 months from the date of installation, whichever is
sooner.  Buyer must return the defective part to the factory, freight prepaid,...

28
Keep this Manual in a Convenient Location for Reference
Anetsberger Brothers, Inc.
180 North Anets Drive  •  Northbrook, Illinois  60062  •  847-272-0770  •  Fax 847-272-1943
Toll-free Customer & Warranty Service:   800/ 837-2638
Web Site:  www.anetsberger.com
Form  I-105; Rev. 10/01 Price $20.00 US