Home > Anschutz > Small Bore Rifle > Anschutz Trigger Target Trigger 5020 User Manual

Anschutz Trigger Target Trigger 5020 User Manual

Add to Favourites
    Download as PDF

    View the Anschutz Trigger Target Trigger 5020 User Manual for free. All the Anschutz manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 26i r et uo pa sd f Trigger adjustments 1. Trigger weight Adjust the trigger weight with set screw No. 10 (silver screw): ¥if you turn it to the right: trigger weight is increased (+) ¥if you turn it to the left: trigger weight is decreased (-) Trigger weight and first stage weight depend on each other with regard to the mechanic mechanism. If one of them is changed there will always be a corres- ponding change of the other as well. Trigger Warning: Your ANSCH†TZ target rifle offers you a...
    Page 2 27 To move trigger cam No. 11: ¥lowest position of the trigger cam: lowest trigger weight ¥highest position of the trigger cam: highest trigger weight If the trigger weight is to be more than 200 g,the trigger cam No. 11 must be adjusted to the highest position (turn it by 180° and fix it then). To do this you need a 2 mm hex key and perhaps tweezers. ¥if you turn it to the left: You release the screw ¥if you turn it to the right: You tighten the screw Attention: Please ensure the trigger cam is...
    Page 3 28 i retuo pa sd f The sear engagement is too long: There is a small distance between the second stage and the release of the trigger. ¥Turn set screw No. 5 clockwise after cocking and releasing (approximately 1/8 turn each). ¥Repeat this process until you do not feel the second stage anymore. Then turn 1/5 turn back to the left. Thus the optimum sear engagement is adjusted. The sear engagement is too short: There is no second stage. The trigger releases undefined without second stage. ¥Turn set screw...
    Page 4 29 Attention: The trigger stop set screw No. 8 can be turned over the second stage or first stage function. Malfunction (the trigger does not release)! 6. Adjustment of the trigger blade ¥Loosen hex screw No. 7 ¥Trigger blade No. 6 can be moved in the longitudinal guide and can be tilted laterally. 7. Change of two-stage trigger into single stage trigger Adjusting process: ¥Turn first stage weight screw No. 4 clock- wise until you have reached the maximum first stage. ¥Cock the rifle. ¥Turn set...
    Start reading Anschutz Trigger Target Trigger 5020 User Manual

    Related Manuals for Anschutz Trigger Target Trigger 5020 User Manual

    All Anschutz manuals