Home > Antennacraft > TV Antenna > Antennacraft Antenna HD1850 manual

Antennacraft Antenna HD1850 manual

Add to Favourites
    Download as PDF

    View the Antennacraft Antenna HD1850 manual for free. All the Antennacraft manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 3.If your antenna has a support boom, align its support straps and mast clamp with the main boom’s support strap holes and mast clamp. Attach the support straps to the main boom using the supplied 1 1/2-inch screws and large wing nuts. 4. Press the supplied large end plugs into the main boom and cradle boom. 5. Pull the two halves of the UHF dipole away from the main boom until they lock into place. Then place each half’s un- attached end over one of the antenna’s lead-in terminals (one for each half of...
    Page 2 Using Coaxial Cable 1. Thread the supplied matching transformer’s spade terminal ends through the antenna’s strain-relief tab. 2. Slide the spade terminal ends around the antenna’s lead-in terminals marked CONNECT LEAD-IN HERE. Secure them with the supplied flat washers and large wing nuts. 3. Screw the cable’s F-connector onto the matching transformer. Then slip the weatherboot over the connection. Note: If you use a cable without a weatherboot, cover the connection with weatherproof tape. Using...
    Start reading Antennacraft Antenna HD1850 manual

    Related Manuals for Antennacraft Antenna HD1850 manual

    All Antennacraft manuals