AOC 2217pwc User Manual

							 
  
Full Enhance:    When Full Enhance is turned on, the color satur ation of the entire screen is fully enriched, thus all colors become more vibrant.  
 
   
  
Nature Skin:    When Natural Skin is turned on, the red and yel low colors are enriched automatically, thus present s human skin with more natural and truer colors. 
Natural Skin setting is ideal for viewing human p ortrait and detailed skin texture.  
   
						

							 
   
  
Green Field:     When Green Field is turned on, the green colo r is enriched so that football field and mountain landscape would look more natural and fresh. “Green  Field” 
setting is ideal for watching mountain scenery and  outdoor sports.  
 
   
   
Sky Blue:    WhenSky Blue is turned on, the color blue is b eing fine-tuned so that the sky or ocean landscape  will look more vivid and in-depth. Sky Blue setting is ideal 
for viewing sky and ocean images.  
   
						

							 
   
   
Auto Detect:     When “Auto Detect” is turned on, every pigment w ill be detected and self-adjusted to render a lively picture.   
   
  
Demo:     Screen divided into two for demonstration purpo ses.  
     
2) How to use Picture Boost?   
Users can change the color settings of a self-selec ted zone on the screen. The size and position of th e selected zone can also be adjusted. Picture Boos t is located in the 
fifth icon labeled Picture Boost in the OSD menu.  Turn on Bright Frame to select a zone on the scr een to be enhanced. Please note when adjust or turn  on any one of 
the DCB features, the rest of color settings includ ing DCR will be disabled or return to default.  
   
						

							 
 
   
Disclaimer:  DCB aftereffects are subject to the resolution and  quality of the display content, hence may look different than the above illustrations.  
  
DCR Adjustment
  
 
   
What is DCR?   
Dynamic Contrast Ratio (DCR) auto adjusts the brigh tness of the screen so users can see the darker areas of the displayed content in more depths. By increasing the 
darkness of the dark areas and the brightness of th e bright areas, contrast ratio is uplifted to exceed 2000:1. DCR value varies subject to the original  CR values of the LCD 
module. The higher the original CR, the higher DCR  can be achieved. DCR is great for watching movie or  video contents.  
   
How to Use DCR?   
Go to the first OSD icon labeled Luminance, turn  on or off DCR as desires. DCR boosts the contrasts  between lightness & darkness and enables the viewer  to see more 
layers and details of the picture, especially in th e darker areas. Please note when DCR is on, DCB wil l be disabled. 
   
						

							 
 
   
DCR Demos:  
 
Disclaimer:  DCR aftereffects are subject to the resolution and  quality of the display content, hence may look different than the above illustrations.  
Function Control Illustration
 Luminance  
Adjust Range  
Description  
Brightness  
0-100  
Backlight Adjustment  
Contrast  
0-100  
Contrast from Digital-register. 
Standard 
Standard Mode  
 
Eco mode   
Text 
Text Mode 
   
						

							Internet 
Internet Mode 
Game 
Game Mode  
Movie 
Movie Mode 
  
Sports 
Sports Mode 
Gamma1 
Adjust to Gamma1 
Gamma2 
Adjust to Gamma 2 
Gamma  
Gamma3 
Adjust to Gamma 3  
Off 
Disable dynamic contrast ratio 
 
DCR  
On 
Enable dynamic contrast ratio 
Image Setup  
 
 
Clock  
0-100  
Adjust picture Clock to reduce Vertical-Line noise.  
Focus  
0-100  
Adjust Picture Phase to reduce Horizontal-Line nois e  
H.Position  
0-100  
Adjust the verticalposition of the picture.  
 
V.Position  
0-100  
Adjust the horizontal position of the picture.  
Color Temp.  
 
 
Warm  
 
Recall Warm Color Temperature from EEPROM.  
Normal  
 
Recall Normal Color Temperature from EEPROM.  
Cool  
 
Recall Cool Color Temperature from EEPROM.  
sRGB  
 
Recall SRGB Color Temperature from EEPROM.  
User-B 
Blue Gain from Digital-register  
User-G 
Green Gain Digital-register.  
User-R 
Red Gain from Digital-register  
User-Y 
Yellow Gain from Digital-register  
User-C 
Cyan Gain from Digital-register  
 
User  
User-M 
Magenta Gain from Digital-register  
Color Boost  
 
 
Full Enhance  
on or off 
Disable or Enable Full Enhance Mode 
Nature Skin  
on or off 
Disable or Enable Nature Skin Mode 
Green Field  
on or off 
Disable or Enable Green Field Mode 
Sky-blue  
on or off 
Disable or Enable Sky-blue Mode 
AutoDetect  
on or off 
Disable or Enable AutoDetect Mode 
 
Demo  
on or off 
Disable or Enable Demo  
Picture Boost  
 
 
Frame Size  
0-100  
Adjust Frame Size  
Brightness  
0-100  
Adjust Frame Brightness  
Contrast  
0-100  
Adjust Frame Contrast  
Hue  
0-100  
Adjust Frame Hue 
Saturation  
0-100  
Adjust Frame Saturation  
H. position  
Adjust Frame horizontal Position 
Position  
V.position 
Adjust Frame vertical Position 
 
Bright Frame  
on or off  
Disable or Enable Bright Frame  
OSD Setup  
 
 
 
						

							OSD Setup  
 
 
H.Position  
0-100  
Adjust the verticalposition of OSD 
V.Position  
0-100  
Adjust the horizontal position of OSD 
Timeout  
0-100  
Adjust the OSD Timeout  
 
Language  
 
Select the OSD language  
Extra  
 
 
Digital 
Select Digital Sigal Source as Input 
Input Select 
Analog 
Select Analog Sigal Source as Input 
Auto Config  
yes or no  
Auto adjust the picture to default  
Reset  
yes or no 
Reset the menu to default  
DDC-CI 
  
Turn ON/OFF DDC-CI Support 
 
Information  
 
Show the information of the main image and sub-image source  
LED Indicators
 
Status 
LED Color  
Full Power Mode 
Green or Blue  
Active-off Mode 
Orange or red  
Camera Software
 
. There is webcam application software in attached  CD, please click   here
 and download to your computer  for customization.  
  
5. Drivers Windows 2000
 
1. Start Windows® 2000   
2. Click on the Start button, point to Settings , and then click on Control Panel.  
3. Double click on the Display Icon.  
4. Select the Settings tab then click on Advance d....  
5. Select Monitor  
- If the Properties button is inactive, it means  your monitor is properly configured. Please stop in stallation.  
- If the Properties button is active. Click on P roperties button. Please follow the steps given be low.  
6. Click on Driver and then click on Update Driv er... then click on the Next button.  
7. Select Display a list of the known drivers for  this device so that I can choose a specific driver , then click on Next and then click on Have disk ....  
8. Click on the Browse... button then select the  appropriate drive F: ( CD-ROM Drive).  
 
						

							9. Click on the Open button, then click on the OK button.  
10. Select your monitor model and click on the Nex t button.  
11. Click on the Finish button then the Close b utton.  
If you can see the Digital Signature Not Found wi ndow, click on the Yes button.  
Windows ME
 
1. Start Windows® Me   
2. Click on the Start button, point to Settings , and then click on Control Panel.  
3. Double click on the Display Icon.   
4. Select the Settings tab then click on Advance d....  
5. Select the Monitor button, then click on Chan ge... button.  
6. Select Specify the location of the driver(Advan ced) and click on the Next button.  
7. Select Display a list of all the drivers in a s pecific location, so you can choose the driver you  want, then click on Next and then click on Have Disk....  
8. Click on the Browse... button, select the appr opriate drive F: ( CD-ROM Drive) then click on the  OK button.  
9. Click on the OK button, select your monitor mo del and click on the Next button.  
10. Click on Finish button then the Close butto n.  
Windows XP
 
1. Start Windows® XP   
2. Click on the Start button and then click on C ontrol Panel.  
3. Select and click on the category Printers and O ther Hardware  
4. Click on the Display Item.   
5. Select the Settings tab then click on the Adv anced button.  
6. Select Monitor tab  
- If the Properties button is inactive, it means  your monitor is properly configured. Please stop in stallation. 
- If the Properties button is active, click on P roperties button. 
Please follow the steps below.   
7. Click on the Driver tab and then click on Upd ate Driver... button.  
8. Select the Install from a list or specific loca tion [advanced] radio button and then click on the  Next button.  
9. Select the Dont Search. I will choose the driv er to install radio button. Then click on the Next button.  
10. Click on the Have disk... button, then click  on the Browse... button and then select the appro priate drive F: (CD-ROM Drive).  
11. Click on the Open button, then click the OK  button.  
12. Select your monitor model and click on the Nex t button. 
- If you can see the has not passed Windows® Logo  testing to verify its compatibility with Windows® XP message, please click on the Continue Anyway b utton.  
 
						

							13. Click on the Finish button then the Close button.  
14. Click on the OK button and then the OK butt on again to close the Display_Properties dialog box .  
Windows Vista
 
1. Start Windows® Vista  
2. Click the Start button; select and click on Con trol Panel. 
3. Select and click on Hardware and Sound 
4. Choose Device Manager and Click on Update dev ice drivers. 
5. Select Monitor and then right click on Generi c PnP Monitor. 
6. Click on Update Driver Software.  
7. Select Browse my computer for driver software.  
8. Click the Browsebutton and choose the drive in  which youve placed the disk. Example:(CD-ROM Driv e:\\Lcd\PC\drivers\). 
9. Click the Next button. 
10. Wait few minutes for installing the driver, and  then click Close button.  
  
6. Technical Support Frequently Asked Questions
 
Problem & Question 
Possible Solutions 
Power LED Is Not ON  
· 
Make sure the power button is ON and the Power Cord  is properly connected to a grounded power outlet and to the monitor.  
No Plug & Play 
· 
In order for the Plug & Play feature of the monitor  to work, you need a Plug & Play compatible compute r & video card.  Check with your computer manufacture r. Also check the monitors video cable and make sure none of the pins are bent.  
· 
Make sure the AOC Monitor Drivers are installed (AO C Monitor Drivers are available at : http://www.aoc.com
)  
Picture Is Fuzzy & Has Ghosting Shadowing Problem  
· 
Adjust the Contrast and Brightness Controls.  
· 
Make sure you are not using an extension cable or s witch box. We recommend plugging the monitor directly to the video card output connector on the back of your computer.  
Picture Bounces, Flickers Or Wave Pattern Is Present In The Picture 
· 
Move electrical devices that may cause electrical i nterference as far away from the monitor as possibl e. 
 
· 
Use the maximum refresh rate your monitor is capabl e of at the resolution your are using.  
Monitor Is Stuck In Active Off-Mode 
· 
The Computer Power Switch should be in the ON posit ion.  
 
						

							· 
The Computer Video Card should be snugly seated in  its slot.  
· 
Make sure the monitors video cable is properly con nected to the computer.  
· 
Inspect the monitors video cable and make sure non e of the pins are bent.  
· 
Make sure your computer is operational by hitting t he CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or  OFF after hitting the CAPS LOCK key.  
Missing one of the primary colors (RED, GREEN, or BLUE) 
· 
Inspect the monitors video cable and make sure tha t none of the pins arebent.  
· 
Make sure the monitors video cable is properly con nected to the computer.  
Screen image is not centered or sized properly 
· 
Adjust H-Position and V-Position or press hot-key ( AUTO).  
Picture has color defects (white does not look white) 
· 
Adjust RGB color or select color temperature  
Horizontal or vertical disturbances on the screen  
· 
Use win 95/98 shut-down mode Adjust CLOCK and FOCUS  or perform hot-key (AUTO-key )  
  
7. Product Information   
Specifications  
Model number  
2217Pwc 
Driving system  
TFT Color LCD  
Viewable Image Size 
548mm diagoanl 
Pixel pitch  
0.277mm(H) x 0.277mm(V) 
Video  
R, G, B Analog lnterface & Digital Interface 
Separate Sync.  
H/V TTL 
Display Color  
16.7M Colors  
LCD Panel  
Dot Clock  
170 MHz  
Horizontal scan range  
30 kHz - 83 kHz 
Horizontal scan Size(Maximum)  
464.94mm  
Vertical scan range  
56 Hz - 75 Hz  
Vertical scan Size(Maximum) 
290.58mm  
Optimal preset resolution  
1680 x 1050 (60 Hz) 
Highest preset resolution  
1680 x 1050 (60 Hz)  
Plug & Play  
VESA DDC2B/CI  
Input Connector  
D-Sub 15pin & DVI-D  
Input Video Signal  
Analog: 0.7Vp-p(standard), 75 OHM, Positive & DVI-D Digital Interface (TMDS)  
Resolution  
Power Source  
100~240VAC, 47~63Hz