AOC 2230fm User Manual
Have a look at the manual AOC 2230fm User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 65 AOC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
5. Picture Boost
Picture Boost
Adjust Range
Description
Bright Frame
on or off
Disable or Enable Bright Frame
Frame Size
14-100
Adjust Frame Size
Brightness
0-100
Adjust Frame Brightness
Contrast
0-100
Adjust Frame Contrast
H. position
0-100
Adjust Frame horizontal Position
V.position
0-100
Adjust Frame vertical Position
Reset
Reset the menu to default
Remarks:
1) Only when Bright Frame is set to “on”, the other 5 items can be adjusted.
2) If anyone of DCR, Color Boost and Bright Frame o f Picture Boost is set to “on”, the others are set to “off” automatically.
8. Help
On this page, you can find the information of the m onitor . W elcome to link our website and send email to us if you have any problem.
Compatibility :
i-Menu supports major graphic cards of ATI, N vidia, Intel, VIA(S3). Please contact with us if your graphic card was not supported i-Menu software.
DMP Function（
（（
（
Digital Media Player ）
））
）
Pls follow up the steps below and start your DMP f unction .
1 , Input Interface:
1) 4 in 1 memory card x1: Support SD / MMC / MS / xD memory cards
2) USB host
2, Support file format :
Photo : *.jpg, *.bmp, *.png, *.gif *.tiff
Audio : *.MP3, *.W MA , *.W AV
Video : *.mpg, *.dat, *.avi, *.rm , *.rmvb
3, Operation guide :
1) , Key button Introduction : : Sel – : Sel + : E xit : Enter / Source
2) Operation guide with key button
Turn on the monitor .
Incert one of the cards (SD/MS/MMC/XD) into the 4-i n-1 slot or USB Host .
press
button to activate the OSD source menu .
press
button continuously untill DMP function is selecte d , then press the Power button to enter into DMP i nterface .
In DMP main interface ， press
or
for function selection .
Press
button to enter into the sub-menu for input selecti on .
Press
button to enter into the file list .
Press
or
button to choose your favorable content .
Press
button for playing confirmation
Press
button for the superior menu return
If you want to see any other function, repeat the a bove steps .
In DMP interface , press
button to activate the OSD source menu , sellect t he other source (except DMP) ，then press the Power button for DMP exit
confirmation .
When the DMP is playing , press
button to activate Information Bar , and choose the function listed for adjustment .
5. Drivers
Windows 2000
1. Start W indows® 2000
2. Click on the Start button, point to Settings , and then click on Control Panel.
3. Double click on the Display Icon.
4. Select the Settings tab then click on Advance d....
5. Select Monitor
- If the Properties button is inactive, it means your monitor is properly configured. Please stop in stallation.
- If the Properties button is active. C lick on P roperties button. Please follow the steps given be low.
6. Click on Driver and then click on Update Driv er... then click on the Next button.
7. Select Display a list of the known drivers for this device so that I can choose a specific driver , then click on Next and then click on Have disk ....
8. Click on the Browse... button then select the appropriate drive F: ( CD-ROM Drive).
9. Click on the Open button, then click on the O K button.
10. Select your monitor model and click on the Nex t button.
11. Click on the Finish button then the Close b utton.
If you can see the Digital Signature Not Found wi ndow, click on the Yes button.
Windows ME
1. Start W indows® Me
2. Click on the Start button, point to Settings , and then click on Control Panel.
3. Double click on the Display Icon.
4. Select the Settings tab then click on Advance d....
5. Select the Monitor button, then click on Chan ge... button.
6. Select Specify the location of the driver(Advan ced) and click on the Next button.
7. Select Display a list of all the drivers in a s pecific location, so you can choose the driver you want, then click on Next and then click on Have Disk....
8. Click on the Browse... button, select the appr opriate drive F: ( CD-ROM Drive) then click on the OK button.
9. Click on the OK button, select your monitor mo del and click on the Next button.
10. Click on Finish button then the Close butto n.
Windows XP
1. Start W indows® XP
2. Click on the Start button and then click on C ontrol Panel.
3. Select and click on the category Printers and O ther Hardware
4. Click on the Display Item.
5. Select the Settings tab then click on the Adv anced button.
6. Select Monitor tab
- If the Properties button is inactive, it means your monitor is properly configured. Please stop in stallation.
- If the Properties button is active, click on P roperties button.
Please fo llow the steps below.
7. Click on the Driver tab and then click on Upd ate Driver... button.
8. Select the Install from a list or specific loca tion [advanced] radio button and then click on the Next button.
9. Select the Dont Search. I will choose the driv er to install radio button. Then click on the Next button.
10. Click on the Have disk... button, then click on the Browse... button and then select the appro priate drive F: (CD-ROM Drive).
11. Click on the Open button, then click the OK button.
12. Select your monitor model and click on the Nex t button.
- If you can see the has not passed W indows® Logo testing to verify its compatibility with W indows® XP message, please click on the Continue Anyway b utton.
13. Click on the Finish button then the Close b utton.
14. Click on the OK button and then the OK butt on again to close the Display_Properties dialog box .
Windows Vista
1. Start W indows® Vista 2. Click the Start button; select and click on Con trol Panel.
3. Select and click on Hardware and Sound
4. Choose Device Manager and Click on Update dev ice drivers.
5. Select Monitor and then right click on Generi c PnP Monitor.
6. Click on Update Driver Software.
7. Select Browse my computer for driver software.
8. Click the Browsebutton and choose the drive in which youve placed the disk. E xample:(CD-ROM Driv e:\\Lcd\PC\drivers\).
9. Click the Next button.
10. W ait few minutes for installing the driver, and then click Close button.
6. Technical Support Frequently Asked Questions Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor. No Plug & Play In order for the Plug & Play feature of the monitor to work, you need a Plug & Play compatible computer & video card. Check with your computer ma nufacturer. Also check the monitors video cable and make sure none of the pins are bent. Make sure the AOC Monitor Drivers are installed (AO C Monitor Drivers are availab le at : http://www.aoc.com ) Picture Is Fuzzy & Has Ghosting Shadowing Problem Adjust the Contrast and Brightness Controls. Make sure you are not using an extension cable or s witch box. W e recommend plugging the monitor directly to the video card output connector on the back of your computer. Picture Bounces, Flickers Or Wave Pattern Is Present In The Picture Move electrical devices that may cause electrical i nterference as far away from the monitor as possible. Use the maximum refresh rate your monitor is capabl e of at the resolution your are using. Monitor Is Stuck In Active Off-Mode The Computer Power Switch should be in the ON posit ion. The Computer Video Card should be snugly seated in its slot. Make sure the monitors video cable is properly con nected to the computer. Inspect the monitors video cable and make sure non e of the pins are bent. Make sure your computer is operational b y hitting t he CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key. Missing one of the primary colors (RED, GREEN, or BLUE) Inspect the monitors video cable and make sure tha t none of the pins arebent. Make sure the monitors video cable is properly con nected to the computer. Screen image is not centered or sized properly Adjust H-Position and V-Position or press hot-key ( AUTO). Picture has color defects (w hite does not look white) Adjust RGB color or select color temperature Horizontal or vertical disturbances on the screen Use win 95/98/2000/ME/XP shut-down mode Adjust CLOC K and FOCUS or perform hot-key (AUTO-key )
7. Product Information Specifications LCD Panel Model number 2230Fm Driving system TFT Color LCD Viewable Image Size 558.68mm diagoanl Pixel pitch 0.282mm(H) x 0.282mm(V) Video R, G, B Analog lnterface & Digital Interface, HDMI Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 165 MHz Resolution Horizontal scan range 31 kHz - 83 kHz Horizontal scan Size(Maximum) 473.76mm Vertical scan range 56 Hz - 76 Hz Vertical scan Size(Maximum) 296.1mm Optimal preset resolution 1680 x 1050 (60 Hz) Highest preset resolution 1680 x 1050 (60 Hz) Plug & Play VESA DDC2B/CI Input Connector D-Sub & DVI-D,HDMI Input Video Signal Analog: 0.7Vp-p(standard), 75 OHM, Positive & DVI-D ,HDMI Power Source 100~240VAC, 50/60Hz Power Consumption Active < 60 W Standby < 2 W Speakers 2 x 2W Physical Characteristics Connector Type 15-pin Mini D-Sub & 24 pin DVI-D, 19 pin HDMI Signal Cable T ype Detachable Dimensions & W eight: Height (with base) 439 mm W idth 358 mm Depth 210 mm Weight (monitor only) 5.2kg Weight (with packaging) 6.7 kg Environmental Temperature: Operating 0° to 40° Non-Operating -20°to 60° Humidity: Operating 10% to 85% (non-condensing) Non-Operating 5% to 80% (non-condensing) Altitude: Operating 0~ 3000m (0~ 10000 ft ) Non-Operating 0~ 5000m (0~ 15000 ft )