Home > Apple > Notebook > Apple ibook g4 early 2004 User Manual

Apple ibook g4 early 2004 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Apple ibook g4 early 2004 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							iBook G4 Take Apart - 160
     Antenna Board8. On the left side of the bezel, remove the two Phillips screws at the antenna receptor.   
    9. Tilt up the antenna receptor to remove it from the left side of the bezel assembly. 
    10. Unwrap the tape that secures the AirPort Extreme Card antenna to the cable bundle.    
    						
    							161 - iBook G4 Take Apart
     Antenna Board 11. Use a black stick to lift out the cables from the channels. 
    12. Remove the antenna board with attached cables and antenna receptors.
    13. Install the replacement antenna board, and reassemble and test the computer.
    Replacement Note: Make sure the right corner of the replacement antenna board 
    aligns with the raised L-shaped guide in the bezel assembly, as shown.   
    Replacement Note: Make sure the replacement antenna board does not cover or 
    pinch any cables.
    Warning: Handle the replacement antenna board, receptors, and cables with 
    care. Do not strain or pinch cables. Do not apply pressure to or bend the 
    antenna receptors. 
    						
    							iBook G4 Take Apart - 162
     Reed Switch Board
    Reed Switch Board
    Tools
    • Soft cloth
    • Black stick (or other nonconductive nylon or plastic tool)
    • #0 Phillips screwdriver
    Replacement Note: If the tape you remove from this assembly is worn and cannot be 
    reused, use new Kapton tape (Apple part number 922-5025).
    Preliminary Steps
    Before you begin, remove the following:
    • Battery 
    • Keyboard and RAM shield
    • AirPort Extreme Card
    • Memory card
    • Bottom case
    • Bottom shield
    • DC-in board
    • Top case
    • Top shield
    • Modem
    • Display module
    • LCD panel 
    						
    							163 - iBook G4 Take Apart
     Reed Switch Board
    Procedure
    1. With the bezel assembly lying on a soft cloth, remove the one 3- mm long Phillips 
    screw at the reed switch board.
    2. Pull up the reed switch cables from the channels on the left side of the bezel.  
    						
    							 
    iBook G4 Take Apart -   
    164  
     Reed Switch Board3. Lift up the cables and peel up the tape that covers the cables running along the bottom 
    of the inverter board.     
    						
    							 
    165 -  
    iBook G4 Take Apart
     Reed Switch Board 4.
      Warning:
       
      When removing the tape that bundles the reed switch cable assembly 
    to the AirPort Extreme Card antenna cable, be careful not to strain or pinch the 
    cables.
    Replacement Note:
       When installing the replacement reed switch board and cables, 
    use new tape to bundle the cables together. 
    Remove the tape to free the AirPort Extreme Card antenna cable from the reed 
    switch cable assembly.   
    5. Disconnect the data cable from the inverter board at CN1.       
    						
    							 
    iBook G4 Take Apart -   
    166  
     Reed Switch Board6. Remove the reed switch cable assembly.
    7. Install the replacement reed switch board and cable assembly, and reassemble and 
    test the computer. 
    						
    							 
    167 -  
    iBook G4 Take Apart
     Microphone Cable  Microphone Cable 
    Tools 
    • Soft cloth
    • Black stick (or other nonconductive nylon or plastic tool) 
    Replacement Note: 
     If the tape you remove from this assembly is worn and cannot be 
    reused, use new Kapton tape (Apple part number 922-5025). 
    Preliminary Steps 
    Before you begin, remove the following:
    • Battery 
    • Keyboard and RAM shield
    • AirPort Extreme Card
    • Memory card
    • Bottom case
    • Bottom shield
    • DC-in board
    • Top case
    • Top shield
    • Modem
    • Display module
    • LCD panel 
    						
    							 
    iBook G4 Take Apart -   
    168  
     Microphone Cable  Procedure  Warning:
       
      Be careful not to strain or pinch the delicate microphone cable or 
    surrounding cables when performing this procedure.
      1. With the bezel assembly lying on a soft cloth, use a black stick to loosen the slack on 
    the cable near the microphone gasket.
    2. Pry up the microphone gasket from the upper left corner of the bezel.    
     
    Warning: 
      
    Do not pull on the delicate wires attached to the microphone.
    Note: 
     If the gasket is covered with tape, be sure to replace it when installing the 
    replacement microphone cable.
    3. Working around the perimeter of the bezel, pull up the microphone cable from the 
    cable channel, being careful not to strain any other cables.  
    						
    							 
    169 -  
    iBook G4 Take Apart
     Microphone Cable 4. Free the microphone cable from the right corner of the bezel and from underneath the 
    tape at the antenna board.  
    						
    All Apple manuals Comments (0)

    Related Manuals for Apple ibook g4 early 2004 User Manual