Apple macbook pro 15 inch late 2008 User Manual
Have a look at the manual Apple macbook pro 15 inch late 2008 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
MacBook Pro (15-inch, Late 2008) Take Apart — Optical Drive Flex Cable 171 2010-06-15 Removal 1 Handle optical drive by sides only. 2 With a black stick or fingernail, carefully wiggle flex cable off optical drive.
MacBook Pro (15-inch, Late 2008) Take Apart — Right Speaker / Subwoofer 172 2010-06-15 First Steps Remove: • Access door • Battery • Bottom case • Camera cable guide • Optical drive Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Black stick • Magnetized Phillips #00 screwdriver Right Speaker / Subwoofer
MacBook Pro (15-inch, Late 2008) Take Apart — Right Speaker / Subwoofer 173 2010-06-15 Removal 1 Remove 4 screws: • 2 (3.2-mm), 922-8744 • 1 (5.0-mm) 922-9754 • 1 (2.6-mm), silver, 922- 8747 2 Disconnect speaker cable on logic board. 3 With a black stick, pry up speaker body to loosen adhesive. Note: Pry around edges, or you will damage subwoofer. Replacement Note: If installing a new speaker, peel adhesive backing off speaker and install in top case
MacBook Pro (15-inch, Late 2008) Take Apart — Hard Drive Connector Cable 174 2010-06-15 First Steps Remove: • Access door • Battery • Bottom case • Hard drive • Midwall • Camera cable guide • Optical drive • Right speaker/ subwoofer Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Black stick • Magnetized Phillips #00 screwdriver Hard Drive Connector Cable
MacBook Pro (15-inch, Late 2008) Take Apart — Hard Drive Connector Cable 175 2010-06-15 Removal 1 Pull straight up on connector on logic board to disconnect cable. 2 Peel up cable from top case.
MacBook Pro (15-inch, Late 2008) Take Apart — Hard Drive Connector Cable 176 2010-06-15 Replacement 1 If installing new cable, peel adhesive backing off cable. 2 Press cable so it lays flat in top case. 3 Connect cable to logic board and hard drive.
MacBook Pro (15-inch, Late 2008) Take Apart — Fans 177 2010-06-15 First Steps Remove: • Access door • Battery • Bottom case Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver Fans
MacBook Pro (15-inch, Late 2008) Take Apart — Fans 178 2010-06-15 Removal 1 Use a black stick to disconnect each fan cable. 2 Remove 6 screws: • 4 (3.5-mm) 922-8754 • 2 (3.2-mm) 922-xxxx next to the optical drive. (Screw part not offfered yet) 3 Lift fans out of top case.
MacBook Pro (15-inch, Late 2008) Take Apart — Logic Board 179 2010-06-15 First Steps Remove: • Access door • Battery • Bottom case • Fans • LVDS cable guide • Memory Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Black stick Logic Board
MacBook Pro (15-inch, Late 2008) Take Apart — Logic Board 180 2010-06-15 Removal 1 Locate camera/ AirPort/Bluetooth/ connector and black shim on the logic board. 2 Using a black stick, pry the shim from the logic board and set it aside. If you don’t remove the shim prior to removing the cable, you could damage the logic board and/or the camera cable. Important: Be sure to replace the shim after you reconnect the cable. Otherwise, the cable could work loose, resulting in no video. Note: A shim is included with a replacement logic board. 3 Peel EMI gasket off camera cable connector (A). 4 Disconnect camera cable from logic board (B). Pull cable toward the optical drive, on same horizontal plane as the logic board.