ASUS Transformer Book Flip TP550LA User Manual

							81
BIOS Settings
NOTE: The BIOS screens in this section are for reference only. The actual screens may differ by model and territory.
Boot
This menu allows you to set your boot option priorities. You may refer to the following procedures when setting your boot priority.
1. On the Boot screen, select Boot Option #1.
→←    : Select Screen ↑↓   : Select Item Enter: Select +/—  : Change Opt. F1   : General Help F9   : Optimized Defaults F10  : Save & Exit     ESC  : Exit 
Boot ConfigurationFast Boot                        [Enabled]Launch CSM                       [Disabled]
Driver Option Priorities
Boot Option PrioritiesBoot Option #1                [Windows Boot Manager]
Add New Boot OptionDelete Boot Option
Sets the system boot order
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.Main   Advanced  Boot   Security   Save & Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Notebook PC E-Manual   
						

							82
2. Press  and select a device as the Boot Option #1. 
→←    : Select Screen ↑↓   : Select Item Enter: Select +/—  : Change Opt. F1   : General Help F9   : Optimized Defaults F10  : Save & Exit     ESC  : Exit 
Sets the system boot order
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.Main   Advanced  Boot   Security   Save & Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Boot ConfigurationFast Boot                        [Enabled]Launch CSM                       [Disabled]
Driver Option Priorities
Boot Option PrioritiesBoot Option #1          [Windows Boot Manager]
Add New Boot OptionDelete Boot Option
Boot Option #1Windows Boot ManagerDisabled
Notebook PC E-Manual  
						

							83
Security
This menu allows you to set up the administrator and user password of your Notebook PC. It also allows you to control the access to your Notebook PC’s hard disk drive, input/output (I/O) interface, and USB interface.
NOTE: 
•	 If	you	install	a	User Password, you will be prompted to input this before entering your Notebook PC's operating system. 
•	 If	you	install	an	Administrator Password, you will be prompted to input this before entering BIOS.
Password DescriptionIf ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup. If ONLY the user’s password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup, the User will have Administrator rights.Administrator Password Status      NOT INSTALLEDUser Password Status               NOT INSTALLED
Administrator PasswordUser PasswordHDD Password Status :              NOT INSTALLEDSet Master PasswordSet User PasswordI/O Interface SecuritySystem Mode state                  UserSecure Boot state                  EnabledSecure Boot Control                [Enabled]Key Management
Set Administrator Password. The password length must be in the following range: Minimum length 3Maximum length 20
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.Main   Advanced   Boot  Security   Save & Exit
→←    : Select Screen ↑↓   : Select Item Enter: Select +/—  : Change Opt. F1   : General Help F9   : Optimized Defaults F10  : Save & Exit     ESC  : Exit 
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Notebook PC E-Manual   
						

							84
To set the password:
1. On the Security screen, select Administrator Password or User Password.
2. Type in a password then press .
3. Re-type to confirm the password then press .
To clear the password:
1. On the Security screen, select Administrator Password or User Password.
2. Type in the current password then press .
3. Leave the Create New Password field blank then press 
.
4. Select Yes in the confirmation box then press .
Notebook PC E-Manual  
						

							85
I/O Interface SecurityIn the Security menu, you can access I/O Interface Security to lock or unlock some interface functions of your Notebook PC.
I/O Interface Security
LAN Network Interface             [UnLock]Wireless Network Interface        [UnLock]HD AUDIO Interface                [UnLock]USB Interface Security
If Locked, LAN controller will be disabled.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.Security
→←    : Select Screen ↑↓   : Select Item Enter: Select +/—  : Change Opt. F1   : General Help F9   : Optimized Defaults F10  : Save & Exit     ESC  : Exit 
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
LAN Network InterfaceLockUnLock
To lock an interface:
1. On the Security screen, select I/O Interface Security.
2. Select an interface you would like to lock then press 
.
3. Select Lock.
Notebook PC E-Manual   
						

							86
USB Interface SecurityThrough the I/O Interface Security menu, you can also access USB Interface Security to lock or unlock ports and devices.
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
USB Interface Security
USB Interface                  [UnLock]
External Ports                 [UnLock]CMOS Camera                    [UnLock]Card Reader                    [UnLock] 
If Locked, all USB device will be disabled
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.Security
→←    : Select Screen ↑↓   : Select Item Enter: Select +/—  : Change Opt. F1   : General Help F9   : Optimized Defaults F10  : Save & Exit     ESC  : Exit 
USB InterfaceLockUnLock
To lock the USB interface:
1. On the Security screen, select I/O Interface Security > USB Interface Security.
2. Select an interface that you would like to lock then select Lock.
NOTE: Setting the USB Interface to Lock also locks and hides the External Ports and other devices included under USB Interface Security.
Notebook PC E-Manual  
						

							87
Set Master PasswordIn the Security menu, you can use Set Master Password to set up a password-enabled access to your hard disk drive. 
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Set HDD Master Password.***Advisable to Power Cycle System after Setting Hard Disk Passwords***
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.Main   Advanced   Boot  Security   Save & Exit
→←    : Select Screen ↑↓   : Select Item Enter: Select +/—  : Change Opt. F1   : General Help F9   : Optimized Defaults F10  : Save & Exit     ESC  : Exit 
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Password DescriptionIf ONLY the Administrator’s password is set,then this only limits access to Setup and is only asked for when entering Setup. If ONLY the user’s password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup, the User will have Administrator rights. 
Administrator Password Status  NOT INSTALLEDUser Password Status           NOT INSTALLEDAdministrator PasswordUser PasswordHDD Password Status :          NOT INSTALLEDSet Master PasswordSet User PasswordI/O Interface Security
To set the HDD password:
1. On the Security screen, select Set Master Password.
2. Type in a password then press .
3. Re-type to confirm the password then press .
4. Select Set User Password then repeat the previous steps to set up the user password.
Notebook PC E-Manual   
						

							88
Save & Exit
To keep your configuration settings, select Save Changes and Exit before exiting the BIOS. 
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.Main   Advanced   Boot   Security  Save & Exit
→←    : Select Screen ↑↓   : Select Item Enter: Select +/—  : Change Opt. F1   : General Help F9   : Optimized Defaults F10  : Save & Exit     ESC  : Exit 
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Save Changes and ExitDiscard Changes and Exit
Save OptionsSave ChangesDiscard Changes
Restore Defaults
Boot OverrideWindows Boot Manager  
Launch EFI Shell from filesystem device
Exit system setup after saving the changes.
Notebook PC E-Manual  
						

							89
To update the BIOS:
1. Verify the Notebook PC’s exact model then download the latest BIOS file for your model from the ASUS website.
2. Save a copy of the downloaded BIOS file to a flash disk drive.
3. Connect your flash disk drive to your Notebook PC.
4. Restart your Notebook PC then press  during POST.
5. From the BIOS menu, Select Advanced > Start Easy Flash, then 
press .
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Start Easy FlashInternal Pointing Device              [Enabled]Wake on Lid Open                      [Enabled]Power Off Energy Saving               [Enabled]SATA ConfigurationGraphics ConfigurationIntel (R) Anti-Theft Technology CorporationUSB ConfigurationNetwork Stack
Press Enter to run the utility to select and update BIOS.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.Main  Advanced   Boot   Security   Save & Exit
→←    : Select Screen ↑↓   : Select Item Enter: Select +/—  : Change Opt. F1   : General Help F9   : Optimized Defaults F10  : Save & Exit     ESC  : Exit 
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Notebook PC E-Manual   
						

							90
FSOFS1FS2FS3FS4
0 EFI 
ASUSTek Easy Flash Utility
[←→]: Switch [↑↓]: Choose [q]: Exit [Enter]: Enter/Execute
Current BIOSPlatform: TP550Version: 101Build Date: Oct 26 2012Build Time: 11:51:05
New BIOSPlatform: UnknownVersion: UnknownBuild Date: UnknownBuild Time: Unknown
FLASH TYPE: MXIC 25L Series
6. Locate your downloaded BIOS file in the flash disk drive then 
press . 
7. After the BIOS update process, select Exit > Restore Defaults to restore the system to its default settings. 
Notebook PC E-Manual