Home > Avaya > Communications System > Avaya Partner Advanced Communications System Expanding Instructions

Avaya Partner Advanced Communications System Expanding Instructions

Add to Favourites
    Download as PDF

    View the Avaya Partner Advanced Communications System Expanding Instructions for free. All the Avaya manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 Copyright 2002 All rights reserved. Printed in U.S.A.518-456-500 Comcode 700217318 Issue 3 PARTNER is a registered trademark of Avaya Expanding Your PARTNER® Advanced Communications System This document provides instructions for adding or replacing modules in your existing system. The modules you may add include: 1600 DSL (For use with PARTNER ACS Release 4.0 or later only) 308EC (For use with PARTNER ACS Release 2.0 or later only) 012E (For use with PARTNER ACS Release 5.0 or later only) PARTNER...
    Page 2 Using a 2-Slot Carrier IMPORTANT: The processor module must already be mounted on the wall. If it is not, refer to the documentation that came with your system. Remove the clear, plastic protector from the connector on the rear of the new module (and the processor module if you are upgrading from a stand-alone system) by grasping the tabs and lifting. A) Slide the second module off the processor module and put it aside. B) Slide the new module onto the processor module, making sure the mounting...
    Page 3 Using a 5-Slot Carrier IMPORTANT: The 5-slot carrier and the processor module must already be mounted on the wall. If it is not, refer to the documentation that came with your system. A) Move the carrier’s On/Off switch to “Off,” and unplug the power cord from the wall outlet. B) To remove the cover on Release 3.0 or earlier systems, loosen the screw on the lower front of the cover. C) Place one hand on the handle on the bottom front of the cover, and place your other hand on the top of the cover....
    Page 4 CAUTION The plastic latches on top of the Partner 5 Slot Carrier must be secured properly on all Modules. Make sure the plastic latches are completely down and the round nubs are snapped in place (Figure A). Failure to properly secure the plastic latches will result in loss of power to the Modules (Figure B). Figure A (Correct)Figure B (Incorrect)
    Start reading Avaya Partner Advanced Communications System Expanding Instructions

    Related Manuals for Avaya Partner Advanced Communications System Expanding Instructions

    All Avaya manuals