Avio Ip-30 Intelligent Projector Users Manual

A Proposal for New  
Presentations
Intelligent Projector
User’s Manual
iP-30
English
Deutsch
Français
Español
Italiano 

E-

Thank you for your purchase of an AVIO product. 
Please read this manual carefully in order to use the projector properly.
After reading this, please keep it in a safe place together with the warranty sheet.
Features of the iP-30
• Very versatile five-in-one projector. A projector for the multimedia age.
1.	 Projection	 of	documents,	 catalogs,	and	other	 printed	 materials.	 Printed	materials	 can	be	projected	 directly	without	the	
creation	of	OHP	film.
2.	 Projection	of	personal	computer...

E-

 WARNING
● If a fault occurs:
•  If you detect smoke, or a strange smell or sound, immediately disconnect the power cable.
 It  is  dangerous  to  continue  using  the  projector  after  a  fault  occurs.  Return  the  projector  to  the  dealer  where  it  was  pur-
chased for repair.
● Avoid placing the projector near dangerous substances.
•  Make sure that no metallic or flammable material can get into the projector through the air vents.
• Do not place any objects containing water on top of...

E-

Safety Precautions
 CAUTION
• Installation
• Avoid installing the projector in places where it may be exposed to:
- On tables, etc., that are vulnerable to heat.
- Strong vibrations
- Soot or steam
- Direct sunlight or near a heater (35°C/95°F or higher)
- High humidity or dust
- Extreme cold (0°C/32°F or lower)
- Strong magnetic or electric field generated from a nearby appliance
- Wobbling on an unstable surface
• Do not block the air vents.
• Do not block the air vents with cloth or an...

E-

• Lamp implosion
• A DC type Super High pressure lamp is used in this projector and it is rare for the lamp to explode during use. The unit is 
also designed to forcibly turn off the lamp because there is a high possibility that the lamp will break if it is used beyond 
the lamp usage of 2000 hours (Refer to pages E-43 and E-45).
Note the following things
• A sound occurs because the internal pressure of the Super High pressure lamp gets extremely high.
 The unit is designed so that no pieces...

E-

Table of Contents
Safety Precautions .................................................E-3
A Check of the Supplied Items
and the Names of the Parts ..............................E-7
Supplied Parts Check ...............................................E-7
Names and Functions of the Parts (Projector)  .........E-8
Names and Functions of the Parts (Input Connectors)   ..........E-10
Names and Functions of the Parts (Operation Panel) ............E-11
Names and Functions of the Parts (Remote Control)...

E-

ON/STANDBYLAMP/COVERTEMP
FREEZE OFFFREEZE/CAPTURE
PORTRAITINPUTPOWERTRANSFER

Lens cap
Power cable (3 m)
Remote control
Coin-type lithium battery: CR2025
(Inside the remote control)
iP-30 User’s Manual
PC connection cable (2 m)*
*  No  USB  cable  is  included  with  the 
iP-30BE.
Pull out the sheet before use.
iP Viewer Software Quick Reference*
* Only included with the iP-30SE.
Users manual
D terminal/RGB conversion cable (IPC-D/VGA)
(Option)
A Check of the Supplied Items and the Names of the...

E-

ON/STANDBYLAMP/COVERTEMP
FREEZE OFFFREEZE/CAPTURE
PORTRAITINPUTPOWERTRANSFER

A Check of the Supplied Items and the Names of the Parts
Names and Functions of the Parts (Projector)
Remote control
IR sensor
Lens cap
Focus adjustment ring
Turn this to adjust the focus.
See Page E-22.
Projection lens
The image is projected from here.
*  Be  sure  to  remove  the  lens  cap 
before projecting.
Zoom lever
Turn this to adjust the screen size. See Page E-22.
Document cover
The  document  or  printed...

E-

TESTRGBSVLRAUDIOUSB
ON/STANDBYLAMP/COVERTEMP
FREEZE OFFFREEZE/CAPTURE
PORTRAITINPUTPOWERTRANSFER

A Check of the Supplied Items and the Names of the Parts
Input connector panel
The connectors for the person-
al  computer,  video,  and  other 
connections are located here.
See Page E-10.
Speaker
(2 W, monaural)
Theft prevention lock
Please see the Note below.
R e m o t e  c o n t r o l 
IR sensor
Document reading area
The  document  or  printed  mate-
rial  that  you  wish  to  project  in 
the...

E-10

A Check of the Supplied Items and the Names of the Parts
Names and Functions of the Parts (Input Connectors)
1. Test (maintenance) connector
 This  special  connector  is  used  at  the  time  of  maintenance 
and factory tests. It cannot be used for other connections.
2. Computer/video (D terminal output) video input connector
 Use this input terminal for connection to a computer’s ana-
log  RGB  input  connector  or  a  video  deck’s  D  connector 
output using an RGB conversion cable (sold...