Avio Ip-30 Intelligent Projector Users Manual

E-1

Connection of the Power Cable and On/Off Switching
Switch On the Power
1Connect the power cable
The projector will enter the standby mode and the ON/STANDBY LED will light in red.
2Press the POWER button ()
Switch Off the Power
1Press and hold the POWER button () for 1 second or longer
"Press POWER button again to turn off" will appear on the projection screen.
2Press the POWER button () one more time.
The lamp will go off.
• The lamp/cover LED flashes green, then turns off once...

E-

Adjustment of the Projection Image
Adjust the projection image to the screen.
Adjusting the Projection Image
• When the image is shifted to the left or right, move the projector horizontally. 
(Align the center of the screen with the center of the projector lens.)
• When the image is shifted up or down, use the tilt foot to adjust the pro-
jector vertically.
• When the image is slanted, turn the left or right tilt foot to adjust.
• When there is keystone distortion of the image, adjust...

E-

Regular Operation
This section describes the use of direct operation using the projector and remote control buttons.
Please  see  the  items  on  Page  E-32  "Menu  Operation  Method"  and  Page  E-35  "Menu  Description"  for  information 
about operation using the menu.
Select the Input
Operation with the Projector
Select the input using the INPUT buttons.
The  input  switches  in  the  order  OHP →  PC →  VID-
EO or OHP → VIDEO (D4) → VIDEO each time the 
button is...

E-

Regular Operation
To view the portion that has been cut off
Operation with the Projector
Scrolling  is  not  possible  from  the  main  unit’s  control 
panel.
Operation with the Remote Control
Press  the  SCROLL  (▲▼)  buttons  and  scroll  the  pro-
jection image up or down.
• Pressing  the  ZOOM  (–)  button  permits  display  of  a  large  portion  within  the 
reading range of the vertical display. The undisplayed portion can be displayed 
with the SCROLL (▲▼) buttons.
A
B
C
Enlarging...

E-

Regular Operation
Adjusting the Brightness
NOTE:
• If  no  operation  is  performed  for  several  seconds  while  the  brightness  adjustment  bar  is  displayed,  the  brightness  adjustment 
bar turns off.
Brightness adjustment bar
Operation with the Projector
The brightness cannot be adjusted from the main unit’s 
control panel.
Operation with the Remote Control
Adjust using the BRIGHTNESS (+)/(-) buttons.
 (+) : Projection image becomes brighter
  (–) : Projection image becomes...

E-

Regular Operation
During OHP Input 
Pressing  the  FREEZE/CAPTURE  button  captures  the 
OHP  image  that  is  currently  being  projected  and  saves  it 
as an image file.
The captured image is automatically stored in the memory 
with the other OHP history images.
The image being projected is displayed frozen (unmoving).
During PC/VIDEO Input 
Each time the FREEZE/CAPTURE button is pressed, the currently projected image will be frozen (in a fixed display). 
When a USB cable is...

E-

/ Still Image Display
Regular Operation
Viewing captured imagesOperation with the Projector
A list display of captured images is not available from 
the operation panel of the projector.
Operation with the Remote Control
Press the THUMBNAIL button.
Full-screen Display of Thumbnail Images
Operation with the Projector
A full-screen display of captured images is not available 
from the operation panel of the projector.
Operation with the Remote Control
Select  the  images  that  you  would...

E-

Regular Operation
Operation with the Projector
Volume adjustment cannot be made at the operation 
panel of the projector.
Operation with the Remote Control
Adjust using the VOLUME (+/-) buttons.Volume adjustment bar
Transferring Captured Images *
W h e n  c o n n e c t i o n  i s  m a d e  w i t h  a  U S B 
cable,  history  images  can  be  transferred  to 
the personal computer.
Operation with the Projector
W h e n  t h e  i n p u t  i s  s e t  t o  P C / c o m p o n e n t  v i d e o :...

E-

Displaying the Pointer
This operation displays the pointer in the currently projected image.
Deleting the Projection Image and Audio
This operation deletes the currently projected image and audio without switching off the lamp.
Operation with the Projector
The  ability  to  delete  the  projection  image  is  not  available  from 
the operation panel of the projector.
Operation with the Remote Control
Press the MUTE button.
Operation with the Projector
The  ability  to  turn  on  and  turn...

E-0

TESTRGB SVLRAUDIOUSB?o¯”Åx