Using your Baumatic combi fridge freezer
Before switching on
o Make sure that it has been installed by a suitably qualified
person, as per the information contained in Baumatic’s
o After delivery, wait for eigh t hours before connecting the
appliance to your mains supply. This will allow any refrigerant
gasses that may have been distur bed during the transportation
process, are allowed to settle.
o The outside of the appliance and the removable accessories
contained within it, should be cleaned with a solution of liquid
detergent and water.
o The interior of the appliance should be cleaned
with a solution of sodium bicarbonate dissolved in
lukewarm water. The interior and accessories
should be thoroughly dr ied, after the cleaning
process has been completed.
o There can be an odour when you fi rst switch on the appliance. It
will lessen as the appliance starts to cool.
During first use
o When you first switch on the a ppliance, the compressor will run
continuously for approximately 24 hours or until the fridge
freezer reaches a cool enough temperature.
o During this period of time, you should try not to open the door
frequently or place a large amount of food within the appliance.
o If the unit is switched off or unp lugged, you must allow at least 5
minutes before restarting the a ppliance on the thermostat or
connecting it to your mains supply.