BEKO WKD 24580 T User Manual

							31 - EN
4  Selecting a Program and Operating Your Machine
Control panel
1	-	 Spin	Speed	Adjustment	Knob	*
2	-	 Time	Delay	Button	*
3	-	 Temperature	Adjustment	Knob	*
4	-	 Start/Pause/Cancel	Button
5	-	 Auxiliary	Function	Keys
6 - Program Selection Knob 7	-	 On/Off	Button
8	-	 Program	Follow-up	Indicators	*
9	-	 Child-proof	Lock	Indicator	*
*	According	to	your	machine’s	model
Turning the machine on	You	can	prepare	the	machine	for	program	
selection	by	pressing	the	“On/Off”	button.	
When	the	“On/Off”	button	is	pressed,	the	
“Ready”	light	illuminates	indicating	that	the	
door	is	ulocked.	Press	the	“On/Off”	button	
again	to	shut	down	the	machine.
Program selectionSelect	the	appropriate	program	from	the	
program	table	and	the	following	washing	
temperature	table	according	to	type,	amount	
and	degree	of	soiling	of	the	laundry.	Select	the	
desired	program	with	the	program	selection	
button.
C	Each	of	these	programs	consist	of	a	
complete	washing	process,	including	
wash,	rinse	and,	if	required,	spin	cycles.
90˚C	 Normally	soiled,	white	cottons	
and linens.
60˚C	Normally	soiled,	fade	proof	
colored	linens,	cottons	or	
synthetic	clothes	and	lightly	
soiled	white	linens
40˚C-
30°C- 
Cold   Blended	clothes	including	
synthetics	and	woolens	as	well	
as delicates.
C Programs	are	limited	with	the	highest	spin	
speed	appropriate	for	that	particular	type	
of	cloth.
Main programs 
Depending	on	the	type	of	textile,	the	following	
main	programs	are	available:
•Cottons
You	can	wash	your	durable	clothes	with	this	
program.	Your	laundry	will	be	washed	with	
vigorous	washing	movements	during	a	longer	
washing	cycle.
•Synthetics
You	can	wash	your	less	durable	clothes	on	
this	program.	Gentler	washing	movements	
8
6 4
5
2 1
7
3
 
						

							32 - EN
and	a	shorter	washing	cycle	is	used	compared	
to	the	“Cottons”	program.	It	is	recommended	
for	your	synthetic	clothes	(such	as	shirts,	
blouses,	synthetic/cotton	blended	garments,	
etc.).	For	curtains	and	lace,	the	“Synthetic	
40”	program	with	pre-wash	and	anti-creasing	
functions selected is recommended.
•Delicates
You	can	wash	your	delicate	clothes	on	this	
program.	It	has	more	sensitive	washing	
movements and does not make intermediate 
spinning	compared	to	“Synthetic”	program.
•Woolens
You	can	wash	your	machine-washable	woolen	
garments	on	this	program.	Wash	by	selecting	
the	proper	temperature	according	to	the	labels	
of	your	clothes.	It	is	recommended	to	use	
appropriate	detergents	for	woolens.	
•Hand Wash
You	can	wash	your	woolen/delicate	clothes	
that	bear	“not	machine-	washable”	labels	for	
which	hand	wash	is	recommended	on	this	
program.	It	washes	the	laundry	with	very	
tender	washing	movements	without	damaging	
your	clothes.
Additional programs 
For	special	cases,	there	are	also	extra	
programs	available:
C Additional programs may differ according 
to	the	model	of	your	machine.
• Baby
Increased	hygiene	is	provided	by	a	longer	
heating	period	and	an	additional	rinse	cycle.	It	
is	recommended	for	baby	clothes	and	clothes	
worn	by	allergic	people.
• Intensive
You	can	wash	your	durable	and	heavily	soiled	
clothes	on	this	program.	This	program	washes	
for	a	longer	time	and	an	extra	rinse	cycle	will	
be	made	compared	to	the	“Cottons”	program.	
You	can	use	it	for	your	heavily	soiled	clothes	
that	you	wish	to	be	rinsed	gently.
• Mix
You	can	use	this	program	to	wash	cottons	
and	synthetics	together	without	needing	to	
sort	them.	
• Mini
This	program	is	used	to	quickly	wash	(30	
minutes)	a	small	amount	of	lightly	soiled	cotton	
garments.
Special programsFor	specific	applications,	you	can	select	any	of	
the	following	programs:
• Rinse
This	program	is	used	when	you	want	to	rinse	 or	starch	separately.
• Spin
This	program	spins	with	maximum	possible	
rpm	in	the	default	setting.
C	You	should	use	a	lower	spin	speed	for	
delicate laundries.
• Pump
This	program	is	used	to	discharge	the	water	of	
the	clothes	soaked	into	water	in	the	machine.	
Spin Speed selectionYou	can	have	your	clothes	spun	at	the	
maximum	rpm	selection	on	your	machine	by	
using	the	selection	knob	in	models	equipped	
with	an	rpm	selection	knob.	In	order	to	protect	
your	clothes,	your	machine	will	not	spin	above	
800	rpm	on	synthetic	programs	and	600	rpm	
on	woolens	program.	Furthermore,	if	you	want	
to	skip	the	spin	cycle	and	take	your	clothes	
out,	turn	the	rpm	selection	knob	to	“no	spin”	
position. 
In	machines	not	equipped	with	a	spin	speed	
selection	knob,	the	machine	will	spin	in	the	
maximum	possible	rpm	in	the	default	setting	of	
the	selected	program.
 
						

							33 - EN
Program selection and consumption table
•	:	Selectable
*	:	Automatically	selected,	not	cancellable.
**:	Energy	Label	programme	(EN	60456)
Water	and	power	consumption	and	programme	duration	may	differ	from	the	table	shown,	
subject	to	changes	in	water	pressure,	water	hardness	and	temperature,	ambient	temperature,	
type	and	amount	of	laundry,	selection	of	auxiliary	functions,	and	fluctuations	in	the	supply	
voltage.
C	The	auxiliary	functions	in	the	table	may	differ	according	to	the	model	of	your	machine.
Programme
Max.	Load	(kg)
Programme	Duration	(~min)
Water	Consumption	(l)
Energy	Consumption	(kWh)
Quick	Wash
Rinse Plus
Anti-Creasing
Rinse Hold
Spin speed reduction
No Spin
Cottons904.5 150 501.60 ••• •••
Cottons 60**4.5135 490.85 ••• •••
Cottons 404.5 125 450.60 ••• •••
Intensive 604.5 160 501.00  • •••
Babycare 654.5 170 601.00 *•••
Synthetics 602.5 115 400.90 ••• •••
Synthetics 402.5 105 400.50 ••• •••
Mix 402.5 95400.50 ••• •••
Delicate 40270 450.35 •• •••
Woollens 401.5 55400.25 ••••
Hand	wash 30140 300.15 ••
Mini 302.5 30400.20 ••
 
						

							34 - EN
Auxiliary functionsAuxiliary function selection keys
Select	the	required	auxiliary	functions	before	
starting	the	program.
C	Auxiliary	function	buttons	may	differ	according	to	the	model	of	your	machine.
Auxiliary function selection
If	an	auxiliary	function	that	should	not	be	
selected	together	with	a	previously	selected	
function	is	chosen,	the	first	selected	function	
will	be	cancelled	and	the	last	auxiliary	function	
selection	will	remain	active.
Auxiliary	function	that	is	not	compatible	
with	the	program	cannot	be	selected.	(see	
“Program	Selection	Table”)
Pre-wash
A	pre-wash	is	only	worthwhile	for	heavily	
soiled	laundry.	Without	pre-wash	you	save	
energy,	water,	detergent	and	time.	Pre-wash	
without	detergent	is	recommended	for	lace	
and curtains.
Quick wash
This	function	can	be	used	for	cottons	and	
synthetics	programs.	It	decreases	the	washing	
times	for	lightly	soiled	laundries	and	also	the	
number	of	rinsing	steps.	Shortens	the	program	
time	approximately	45	minutes.
Rinse plus
With	this	function,	you	can	increase	the	
number	of	current	rinsing	steps.	Thus,	
sensitive	skins’	risk	of	being	affected	by	the	
remainder	detergent	on	the	clothes	will	be	
decreased.
Rinse hold
If	you	do	not	want	to	unload	your	clothes	
immediately	after	the	cotton,	synthetics,	
woolen	and	delicate	fabrics	program,	you	
may	release	your	clothes	inside	the	machine	
in	the	last	rinsing	water	by	pressing	the	rinse	
hold	button	in	order	to	prevent	your	clothes	
become	wrinkled.	You	can	spin	by	pressing	
“Start/Pause/Cancel”	button	after	this	
process.
Anti-creasing
This	function	reduces	drum	movement	and	
limits	the	spinning	speed	to	prevent	creasing.	
In	addition,	washing	is	carried	out	at	a	higher	
water	level.	
C	Use	this	function	for	delicate	laundries	that	 crease easily.
C	Whenever	you	select	this	auxiliary	function,	load	your	machine	with	half	of	the	
maximum	laundry	specified	in	the	program	
table.
Spin speed reduction
You	may	use	the	speed	reduction	button	
whenever	you	wish	to	spin	your	clothes	
below	the	maximum	spin	speed.	When	speed	 reduction	button	is	pressed,	spin	speed	will	be	
at	the	minimum	rpm	given	on	the	panel.
No spin
You	may	use	this	program	if	you	do	not	want	
to	spin	your	clothes	at	the	end	of	cottons,	
synthetics,	woolen	or	delicate	programs.
Time delay
If	you	wish	to	wash	your	clothes	at	a	later	
time	in	machines	equipped	with	a	time	delay	
button,	the	time	delay	function	allows	you	
to	delay	the	program	start	time	for	3,	6	or	9	
hours.
When	the	time	delaying	button	is	pressed	
once,	a	3	hours	delay	is	selected.	When	the	
same	button	is	pressed	again,	6	hours;	and	
if	pressed	once	more,	a	9	hours	delay	will	
be	selected.	If	the	time	delaying	button	is	
pressed	one	more	time,	time	delaying	function	
will	be	cancelled.	Time	delay	function	starts	
countdown	after	setting	the	desired	time	delay	
and	pressing	the	“Start/Pause/Cancel”	button.	
C	More	laundry	may	be	loaded	during	the	
time delay period.
Changing and canceling the time delay.
Press	the	“Start/Pause/Cancel”	button	to	
switch	the	machine	to	“Pause”	mode.	Press	
“Start/Pause/Cancel”	button	to	start	the	
program	after	making	the	new	time	delay	
selection. 
Starting the ProgramPress	“Start/Pause/Cancel”	button	to	start	
the	program.		“Start/Pause/Cancel”	button	
will	light	up	to	indicate	that	the	program	has	
started.	The	door	is	locked	and	the	“Ready”	
light	fades.
Progressing a programProgress	of	a	running	program	is	shown	
through	the	program	follow-up	indicator.	At	
the	beginning	of	every	program	step,	the	
relevant	indicator	lamp	will	light	up	and	light	of	
the	completed	step	will	turn	off.	
C	If	the	machine	is	not	spinning,	the	program	 may	 be	in	rinse	 hold	mode	 or	the	 automatic	
spin	correction	system	might	have	been	
activated	because	of	excessive	unbalanced	
distribution	of	laundry	in	the	machine.
Changing the program after the 
program has started
You	can	use	this	feature	after	your	machine	
has	started	to	wash	different	textile	groups	
in	the	same	batch	of	clothes	under	higher	
or	lower	temperatures.	You	must	cancel	
the	ongoing	program	in	order	to	change	the	
washing	program.
For	example,	press	and	hold	the	“Start/Pause/
Cancel”	button	for	3	seconds	in	order	to	select	
 
						

							35 - EN
“Cottons	40”	program	instead	of	“Cottons	60”	
program.	Select	the	“Cottons	40”	program.	
Start	the	program.
Switching the machine to standby 
mode
Press	“Start/Pause/Cancel”	button	
momentarily	to	switch	your	machine	to	the	
standby	mode.	Auxiliary	functions	can	be	
cancelled	or	selected	in	accordance	with	
the	step	the	program	is	at.	The	door	can	be	
opened	if	the	water	level	is	suitable.	Laundry	
may	be	added	/	taken	out	by	opening	the	
door.
Child-proof lockYou	can	protect	the	appliance	from	being	
tampered	by	children	by	means	of	the	child-
proof	lock.	In	this	case,	no	change	can	be	
made	in	the	running	program.
The	machine	is	switched	to	child-lock	by	
pressing	the	1st	and	2nd	auxiliary	functions	
from	the	left	for	3	sec.	Child-proof	lock	lamp	
on	the	program	follow-up	indicator	will	light	
up	when	the	child-proof	lock	is	activated.	
To	deactivate	the	child-proof	lock,	press	the	
same buttons for 3 sec.
Ending the program through 
canceling
In	order	to	cancel	the	selected	program,	
press	the	“Start/Pause/Cancel”	button	for	
3	seconds.	You	can	select	and	start	a	new	
program	when	the	“Ready”	light	is	lit.
The	“Spin”	light	illuminates	if	the	cancellation	
process	is	activated	in	the	middle	of	the	
program	and	the	machine	can	either	drain	all	
the	water	or	can	take	in	water	3	times	at	most	
to	cool	down	the	clothes	and	perform	the	
draining process. 
The	program	which	is	selected	first	will	keep	
on	going	even	if	the	position	of	the	program	
selection	button	is	changed.	A	new	program	
can be selected or started after “Program is 
cancelled”	in	order	to	change	the	washing	
program. 
End of program
The	“Ready”	lamp	on	the	program	follow-up	
indicator	will	light	up	when	the	program	comes	
to	an	end.	The	door	can	be	opened	and	the	
machine	is	ready	for	a	second	cycle	now.		
Press	the	“On/Off”	button	to	shut	down	the	
machine.
5 Maintenance and cleaning
Detergent DrawerRemove	any	powder	residue	buildup	in	the	
drawer.	To	do	this;
1.	 Press	the	dotted	point	on	the	siphon	in	the	
softener	compartment	and	pull	towards	
you	until	the	compartment	is	removed	from	
the	machine.
C If	more	than	a	normal	amount	of	water	
and	softener	mixture	starts	to	gather	in	the	
softener	compartment,	the	siphon	must	be	
cleaned.
2.	 Wash	the	dispenser	drawer	and	the	 siphon	with	plenty	of	lukewarm	water	in	a	
washbasin.	
3.	 Replace	the	drawer	into	its	housing	after	 cleaning.		Check	if	the	siphon	is	in	its	
original location.
Inlet water filtersThere	is	a	filter	at	the	end	of	each	water	intake	
valve	at	the	back	side	of	the	machine	and	also	
at	the	end	of	each	water	intake	hose	where	
they	are	connected	to	the	tap.	These	filters	
prevent	the	foreign	substances	and	dirt	in	the	
water	to	enter	into	the	machine.	Filters	should	
be	cleaned	as	they	get	dirty.
•	 Close	the	taps.
•	 Remove	the	nuts	of	the	water	intake	hoses	to	clean	the	surfaces	of	the	filters	on	the	
water	intake	valves	with	an	appropriate	
brush.
•	 If	the	filters	are	very	dirty,	you	can	pull	them	 out	by	means	of	pliers	and	clean	them.
•	 Take	out	the	filters	on	the	flat	ends	of	 the	water	intake	hoses	together	with	
the	gaskets	and	clean	thoroughly	under	
streaming	water.
•	 Replace	the	gaskets	and	filters	carefully	to	 their	places	and	tighten	the	hose	nuts	by	
hand.
 
						

							36 - EN•		 Place	a	large	container	at	the	end	of	the	
hose.	Drain	the	water	off	into	the	container	
by	pulling	out	the	plug	at	the	end	of	the	
hose.	If	the	amount	of	water	to	be	drained	
off	is	greater	than	the	volume	of	the	
container,	replace	the	plug,	pour	the	water	
out,	then	resume	the	draining	process.
•		 After	draining	process	is	completed,	 replace	the	plug	into	the	end	of	the	hose	
and	fit	the	hose	back	into	its	place.
If	your	product	is	not	supplied	with	an	
emergency	drain	hose,	do	the	following	as	
shown	in	the	figure	below:
•		 Place	a	large	container	in	front	of	the	filter	 to	receive	water	flowing	from	the	filter.
•		 Loosen	pump	filter	(anticlockwise)	until	 water	starts	to	flow	out	of	it.	Direct	the	
flowing	water	into	the	container	you	have	
placed	in	front	of	the	filter.	You	can	use	a	
piece	of	cloth	to	absorb	any	spilled	water.
•		 When	there	is	no	water	left,	turn	the	pump	 filter until it is completely loose and remove 
it.
•		 Clean	any	residues	inside	the	filter	as	 well	as	fibers,	if	any,	around	the	propeller	
region.
•		 If	your	product	has	a	water	jet	feature,	be	 sure	to	fit	the	filter	into	its	housing	in	the	
pump.	Never	force	the	filter	while	replacing	
it	into	its	housing.	Fit	the	filter	fully	into	its	
housing;	otherwise,	water	may	leak	from	
the	filter	cap.
4-	Close	the	filter	cap.
Close	the	two-piece	filter	cap	of	your	product	
by	pushing	the	tab	on	it.
Close	the	one-piece	filter	cap	of	your	product	
by	fitting	the	tabs	on	the	bottom	into	their	
positions	and	pushing	the	upper	part	of	it.
Draining any remaining water and 
cleaning the pump filter
Your	product	is	equipped	with	a	filter	system	
which	ensures	a	cleaner	water	discharge	that	
extends	pump	life	by	preventing	solid	items	
such	as	buttons,	coins	and	fabric	fibers	from	
clogging	the	pump	propeller	during	discharge	
of	the	washing	water.
•		 If	your	machine	fails	to	drain	the	water,	 the	pump	filter	may	be	clogged.	You	may	
have	to	clean	it	every	2	years	or	whenever	
it	is	plugged.	Water	must	be	drained	off	to	
clean	the	pump	filter.	
In	addition,	water	may	have	to	be	drained	off	
completely	in	the	following	cases:
•		 before	transporting	the	machine	(e.g.	when	 moving	house)
•		 when	there	is	the	danger	of	frost
In	order	to	clean	the	dirty	filter	and	discharge	
the	water;
1-	Unplug	the	machine	to	cut	off	the	supply	
power.
A	There	may	be	water	at	90°C	in	the	 machine.	Therefore,	the	filter	must	be	
cleaned	only	after	the	inside	water	is	
cooled	down	to	avoid	hazard	of	scalding.
2-	Open	the	filter	cap.	The	filter	cap	may	be	
composed	of	one	or	two	pieces	according	to	
the	model	of	your	machine.
If	it	is	composed	of	two	pieces,	press	the	tab	
on	the	filter	cap	downwards	and	pull	the	piece	
out	towards	yourself.
If	it	is	composed	of	one	piece,	hold	it	from	
both	sides	and	open	it	by	pulling	out.
3-	An	emergency	drain	hose	is	supplied	with	
some	of	our	models.	Others	are	not	supplied	
with	this	item.
If	your	product	is	supplied	with	an	emergency	
drain	hose,	do	the	following	as	shown	in	the	
figure	below:
•	 Pull	out	the	pump	outlet	hose	from	its	 housing.
 
						

							37 - EN
6 Solution suggestions for problems
ProblemCause Explanation / Suggestion
Program cannot 
be started or 
selected.  Machine	may	have	
switched	to	self	
protection mode due to 
an infrastructure problem 
(such	as	line	voltage,	water	
pressure,	etc.). Reset	your	machine	by	pressing	“Start/Pause/
Cancel”	button	for	3	seconds.	(see,	Canceling	
a Program)
There	is	water	
coming from 
the	bottom	of	
the	machine. There	might	be	problems	
with	hoses	or	the	pump	
filter. Be	sure	the	seals	of	the	water	inlet	hoses	are	
securely fitted.
Tightly	attach	the	drain	hose	to	the	tap.
Make	sure	that	the	pump	filter	is	completely	
closed.
Machine	
stopped 
shortly	after	
the	program	
started. Machine	can	stop	
temporarily	due	to	low	
voltage.
It	will	resume	operating	when	the	voltage	is	
back	to	the	normal	level.
It continuously 
spins.
Remaining time 
does not count 
down. There	may	be	an	imbalance	
of	laundry	in	the	machine. The	automatic	spin	correction	system	might	
have	been	activated	due	to	the	unbalanced	
distribution	of	the	laundry	in	the	drum.
The	laundry	in	the	drum	may	be	clustered	
(bundled	laundry	in	a	bag).	Laundry	should	be	
rearranged and re-spun.
No	spinning	is	performed	when	the	laundry	is	
not	evenly	distributed	in	the	drum	to	prevent	
any	damage	to	the	machine	and	to	its	
environment.
It continuously 
washes.
Remaining time 
does not count 
down. In	the	case	of	a	paused	
countdown	while	taking	in	
water:
Timer	will	not	countdown	
until	the	machine	is	filled	
with	the	correct	amount	of	
water.
The	machine	will	wait	until	there	is	a	sufficient	
amount	of	water	to	avoid	poor	washing	results	
due	to	lack	of	water.	Then	the	timer	will	start	to	
count	down.
In	the	case	of	a	paused	
countdown	at	the	heating	
step:
Time	will	not	count	
down	until	the	selected	
temperature	for	the	
program	is	reached
In	the	case	of	a	paused	
countdown	at	the	spinning	
step:
There	may	be	an	imbalance	
of	laundry	in	the	machine. The	automatic	spin	correction	system	might	
have	been	activated	due	to	the	unbalanced	
distribution	of	the	laundry	in	the	drum.
The	laundry	in	the	drum	may	be	clustered	
(bundled	laundry	in	a	bag).	Laundry	should	be	
rearranged and re-spun.
No	spinning	is	performed	when	the	laundry	is	
not	evenly	distributed	in	the	drum	to	prevent	
any	damage	to	the	machine	and	to	its	
environment.
 
						

							38 - EN
WKD 24560 RWKD 24580 T
4.5 4.5
84 84
60 60
47 47
59 59
230/50 230/50
10 10
2300 2300
600 800
7  Specifications
Specifications	of	this	appliance	may	change	without	notice	to	improve	the	quality	of	the	product.	
Figures	in	this	manual	are	schematic	and	may	not	match	your	product	exactly.
Values	stated	on	the	machine	labels	or	in	the	documentation	accompanying	it	are	obtained	
in	laboratory	in	accordance	with	the	relevant	standards.		Depending	on	operational	and	
environmental	conditions	of	the	appliance,	values	may	vary.
Models
Maximum	dry	laundry	capacity	(kg)
Height	(cm)
Width	(cm)
Depth	(cm)
Net	Weight	(kg)
Electricity	(V/Hz.)
Total	Current	(A)
Total	Power	(W)
Spinning	cycle	(rpm	max.)
This	appliance’s	packaging	material	is	recyclable.	Help	recycle	it	and	protect	the	
environment	by	dropping	it	off	in	the	municipal	receptacles	provided	for	this	purpose.	
Your	appliance	also	contains	a	great	amount	of	recyclable	material.	It	is	marked	with	
this	label	to	indicate	the	used	appliances	that	should	not	be	mixed	with	other	waste.	
This	way,	the	appliance	recycling	organised	by	your	manufacturer	will	be	done	under	
the	best	possible	conditions,	in	compliance	with	European	Directive	2002/96/EC	on	
Waste	Electrical	and	Electronic	Equipment.	Contact	your	town	hall	or	your	retailer	for	
the	used	appliance	collection	points	closest	to	your	home.		We	thank	you	doing	your	
part	to	protect	the	environment.
On/Off
Reset
3 sn. Coton
Start
Pause S
ynthetics
Woollens
DelicateBabycare
Intensive Hand
wash
Express
Rinse
hold Quick
wash Anti
creasing Rinse
plus Time
delay
Prewash Main
wash Drain
Rinse SpinNo
spin No
heat
Temperature
Wash
End
Child
lock
Door
ready Cold
Duvet
Sport Shirt
Conditioner
Reset3’
’8
 
						

							Downloaded From WashingMachine-Manual.com Manual• 
						

							.........................
.........................
.........................
3
3
.........................
.........................
.........................
2
2
.........................
.........................
.........................
1
1
Действ
ует	то лько	на	территории	РФ	/		\/аlid	f or	Russian	Federation	only
ГАРАНТИЯ 2 Г ОДААдрес:	105264,	Р оссия,	г.	Москва,	Измайловский	б-р,	д.	43
Т елефон	cлужбы	сервиса		8-80 0-200-23-56 (Звонок	беспла тный	на	всей	территории	Р оссии)http://www .bеко.ru
Гарантийный талон серия RUS
Мо дель.
Дата про дажи Серийный номер
К омпания
По дпись про давца Дата у
становки
К омпания
По дпись мастера
ПЕЧА ТЬ ПЕЧАТЬ
Покупатель
Фамилия,  Имя, Отчество
Изделие по лучено в по лной комплектации,
проверялось в прис утствии покупателя.
Покупатель с у словиями гарантии ознак омлен.
Подпись Покупа теля
Отрывные купоны г арантийного талона являются средством отчетности о
выпо лнении сервисным центром г арантийных работ. Купон изымается из
га рантийног о талона после у довлетворения Ваших претензий.
серия	RUS
Да та	про дажи серия	RUS
Да
та	про дажи серия	RUS
Да
та	про дажи
ПЕЧА ТЬ
МАГ АЗИНА ПЕЧА
ТЬ
МАГ АЗИНА ПЕЧА
ТЬ
МАГ АЗИНА
ГАРАНТИЯ
2	Г ОДА ГА
РАНТИЯ
2	Г ОДА ГА
РАНТИЯ
2	Г ОДА
Место	для	наклейки	к ода	изделия
Downloaded From WashingMachine-Manual.com Manual•