Belkin Router F9K1107 User Manual

User Manual
F9K1107 8820-00920 Rev. A00
WIRELESS DUAL-BAND 
Tr a v e l  R o u t e r 

TABLE OF CONTENTS
Getting Started  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1What’s in the Box  ............................................1Initial Setup  .................................................1
Getting to Know Your Router  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Front Panel  .................................................4Back Panel ..................................................5
Technical Details  . . . . . . . . . . ....

1
GETTING STARTED
What’s in the Box
Wireless Dual-Band Travel Router
Carrying Case
Ethernet Cable
Power Supply
CD with User Manual
In some regions, the Travel Router includes Plug Adapters to support the various plug types in your region.
US: No plug adapters included
EMEA: UK, EU adapters included
Initial Setup
1.  Connect your Router to the Ethernet (network) connector in your hotel room. (You may use either the cable provided by the hotel or the cable provided with your Travel Router.)  

2
GETTING STARTED
2. If you purchased your Travel Router in Europe or Asia, it shipped with adapters for the various plug types in your region. Please attach the appropriate plug type to the power adapter.
3.  Connect the power adapter to the Travel Router using the provided cable.  

3
GETTING STARTED
4. Plug the power adapter into the wall to start up your Travel Router.
5. Connect your devices to your Wi-Fi® network. The Travel Router ships with a predefined network name (SSID) and password for each band (2.4GHz and 5GHz); this information is on your Quick Installation Guide.
Manual Setup Using Your Browser
In your browser, type “http://router” (you do not need to type in anything else such as “www”). Then press the Enter key. If you’re still having trouble running the manual setup...

4
GETTING TO KNOW YOUR ROUTER
A) Status Light
Your Router’s status is shown by the light on the front.
Off: The Router is not plugged into a power source.
Blinking Blue: The Router is starting up.
Solid Blue: The Router is connected to the Internet.
Blinking Amber: The Router can’t detect the modem. Either the modem is off, is not plugged into the Router, or is unresponsive.
Front PanelB) Wi-Fi Protected Setup (WPS) Light and Button
The WPS button on the front of your Router can be used to help establish...

5
GETTING TO KNOW YOUR ROUTER 
Reset Button
There is a reset button on the bottom of the Router, which can be depressed using a paper clip or other small object.
You may use this button if you need to reset the Travel Router for some reason. See the Troubleshooting section for more details.
A) WAN Connector
Connect your hotel Internet connection to this port using the Ethernet cable provided by the hotel or the cable included with your Router.
B) USB Power Port
This port is for the power supply.
Back...

6
 TECHNICAL DETAILS  
System Requirements
•	 Broadband	Internet 	service 	with 	RJ45 	Ethernet 	connection
•	 At 	least 	one 	computer 	with:
  Installed wireless network interface card and TCP/IP protocol
 Windows® XP 32 (SP3 or greater), Windows Vista® 32 /6 4, or Windows 7® 32/64; or Mac OS® X v10.5 or v10.6
 Internet Explorer® v7 or above, Firefox®, Google Chrome™, or Safari® 
 Minimum 1.8GHz processor
 Minimum 512MB RAM
Technical Features 
Wireless Standards with Link Rate:•	 IEEE	 802.11n	 (up	to...

7
Updating the Router’s Firmware via the Web Interface 
The following steps show you how to update your Router’s firmware using its web interface. You do not need to be connected to the Internet as this interface is built into the Router itself.
Setup steps:
1. Locate and download the firmware file from the Belkin support site. (Type your part number into the search box in the top right corner and look for “Firmware” in the title.)
2. Save the file to a location on your computer where you can get to it...

8
USING YOUR ROUTER
9. Select the firmware file by left-clicking on it and then click the “Open” button in the lower-right corner of the window. This will take you back into the Router’s interface.
7. Click on “Firmware Update” toward the bottom of the left-hand menu.
8
8. Click the “Browse” button toward the middle of the screen to search for the file you saved previously.   Note: The firmware version in the image below is depicted as an example.