Belkin Router F9K1107 User Manual

9
USING YOUR ROUTER
Resetting the Router
Reset Button 
The “Reset” button is used in rare cases when the Router may function improperly. Resetting the Router will restore the Router’s normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the “Reset” button. Use the restore option in instances where you may have forgotten your custom password. 
Resetting the Router
Push and release the “Reset” button. The lights on the Router will...

10
USING YOUR ROUTER
5. Click on the “Restore Defaults” button.
4.  Click on “Restore Factory Defaults” in the left-hand column  under the “Utilities” heading.Restoring the Router to Default Settings Using the Web Interface 
Symptoms
You need to restore the factory defaults using the web interface. This may be because the Router is not performing as expected or you wish to remove all previously configured settings.
Setup steps
1.  Open a web browser on the computer.
2.  In the address bar of the web...

11
USING YOUR ROUTER
7.  The Router will begin the restoring process. Once the restore  is complete, the Router will reboot.  
Note: This may take several minutes.
Your Router has successfully been restored to its factory settings.
6.  A warning box will open that says, “Warning: All your settings will be lost. Are you sure you want to do this?” Click “OK.”  

12
Troubleshooting
I can’t connect to the Internet wirelessly .
If the light on the front of the Router is solid blue, then your Router is connected to the Internet. You may not be connected to the Router’s wireless network. Please refer to “Adding Computers to Your Network” in this manual for instructions. If your Windows XP computer is running SP2, you will not be able to set up the Router via the wireless setup process. You will need to either update to Windows XP SP3 or complete the setup via a wired...

13
TROUBLESHOOTING, SUPPORT, AND WARRANTY 
Limiting the wireless transmit rate
Limiting the wireless transmit rate can help improve range and connection stability. Most wireless cards have the ability to limit the transmission rate. To change this property in Windows, go to the Windows Control Panel, open “Network Connections,” and double-click on your wireless card’s connection. In the properties dialog, select the “Configure” button on the “General” tab, then choose the “Advanced” tab and select the...

14
TROUBLESHOOTING, SUPPORT, AND WARRANTY 
I am having difficulty setting up Wired Equivalent Privacy (WEP) security on my Router .
1. Log in to your Router. Visit http://router/ with your web browser. Click on the “Login” button in the top right-hand corner of the screen. You will be asked to enter your password. If you have never set a password, leave the “Password” field blank and click “Submit.”
2.  Click “Wireless” in the left-hand menu. Then click “Security” just below that.
3.  Select the “128-bit...

15
TROUBLESHOOTING, SUPPORT, AND WARRANTY 
Technical Support
UShttp://www.belkin.com/support
UKhttp://www.belkin.com/uk/support
Australiahttp://www.belkin.com/au/support 
New Zealandhttp://www.belkin.com/au/support
Singapore1800 622 1130
Europehttp://www.belkin.com/uk/support   

16
TROUBLESHOOTING, SUPPORT, AND WARRANTY 
What is not covered by this warranty?All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with. The Belkin Product Warranty does not protect against acts of God such as flood, lightning, earthquake, war, vandalism, theft, normal-use wear and...

17
TROUBLESHOOTING, SUPPORT, AND WARRANTY 
Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 
This warranty gives you specific legal rights, and you may also have...

18
REGULATORY INFORMATION
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITYWe, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the device, F 9 K110 7, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause...