Bisell BISSELL LiftOff with HeatWave Technology 11908 User Manual

							Powerwash Lift-off
® 
USER GUIDE
1190 series  
						

							www.bissell.com
      2
Thanks for buying a BISSELL deep cleaner
w\f’r\f g\bad you purchas\fd a BisseLL 
d\f\fp c\b\fan\fr.  ev\frything w\f know 
about f\boor car\f w\fnt into th\f d\fsign 
and construction of this comp\b\ft\f, 
high-t\fch hom\f c\b\faning syst\fm.
Your BisseLL d\f\fp c\b\fan\fr is w\f\b\b 
mad\f, and w\f back it with a \bimit\fd 
fiv\f-y\far guarant\f\f.  w\f a\bso stand 
b\fhind it with a know\b\fdg\fab\b\f,   
d\fdicat\fd Consum\fr Car\f   
d\fpartm\fnt, so, shou\bd you \fv\fr   
hav\f a prob\b\fm, you’\b\b r\fc\fiv\f fast, 
consid\frat\f assistanc\f.
My gr\fat-grandfath\fr inv\fnt\fd 
th\f f\boor sw\f\fp\fr in 1876.  today, 
BisseLL is a g\boba\b \b\fad\fr in th\f 
d\fsign, manufactur\f, and s\frvic\f  
of high qua\bity hom\fcar\f products  
\bik\f your BisseLL d\f\fp c\b\fan\fr.
t hanks again, from a\b\b of us  
at BisseLL.
Mark J. Biss\f\b\b  
Chairman & Ceosaf\fty instructions ...........3
Product Vi\fw ................ 4
ass\fmb\by ..................\2. 5
op\frations ................ 6-11
Maint\fnanc\f & Car\f ...... 12-13
t roub\b\fshooting ............14
r \fp\bac\fm\fnt Parts ......... 15
a cc\fssori\fs ................ 15
Guarant\f\f ..................\2 16
Consum\fr Car\f .............16
»  Deep cleaning carpeting 
regularly can reduce dust and 
allergens in your home. 
»   Deep cleaning stairs and   
high-traffic areas on a regular 
basis helps prolong carpet life. 
Ti ps
WARNINGAn A ction or A ttention is needed to this AreA in order   
to reduce the risk of electric shock, fire, or injury
GUIDEreAd user guide for complete s Afety And user  
instructions
WEEEdo not thro W the AppliAnce AWA y With the normAl 
houshold WA ste At the end of its life, But hAnd it in A t 
An officiAl collection point for recycling. B y doing  
this you Will help to preser Ve the enVironment.  
						

							      www.
bissell.com3
ImpoRt ANt SAfEty INS tRUctIoNS
»   Do not \b\fav\f app\bianc\f wh\fn p\bugg\fd in.
»    Unp\bug from \f\b\fctrica\b sock\ft wh\fn not in us\f and 
b\ffor\f s\frvicing.
»    Do not modify \farth\fd p\bug.
»    Do not \fxpos\f to rain.  stor\f indoors.
»    Do not a\b\bow to b\f us\fd as a toy.
»   t his app\bianc\f can b\f us\fd by chi\bdr\fn ag\fd from   
8 y\fars and abov\f and p\frsons with r\fduc\fd physica\b, 
s\fnsory and m\fnta\b capabi\biti\fs or \back of \fxp\fri\fnc\f 
and know\b\fdg\f if th\fy hav\f b\f\fn giv\fn sup\frvision   
or instruction conc\frning us\f of th\f app\bianc\f in a saf\f   
way and und\frstand th\f hazards invo\bv\fd. C\b\faning 
and us\fr maint\fnanc\f sha\b\b not b\f mad\f by chi\bdr\fn 
without sup\frvision.  
»     Chi\bdr\fn shou\bd b\f sup\frvis\fd to \fnsur\f that th\fy do 
not p\bay with th\f app\bianc\f.
»    Us\f on\by as d\fscrib\fd in th\f us\fr guid\f.
»    Us\f on\by manufactur\fr’s r\fcomm\fnd\fd attachm\fnts.
»    Do not us\f with damag\fd cab\b\f or p\bug. »    if th\f supp\by cab\b\f is damag\fd, it must b\f r\fp\bac\fd by 
th\f manufactur\fr, its s\frvic\f ag\fnt or simi\bar\by qua\bifi\fd 
p\frsons in ord\fr to avoid a hazard.
»    Do not imm\frs\f in wat\fr or \biquid.
»    if app\bianc\f is not working as it shou\bd, has b\f\fn 
dropp\fd, damag\fd, \b\fft outdoors, or dropp\fd into 
wat\fr; do not att\fmpt to op\frat\f it and hav\f it 
r\fpair\fd at an authoriz\fd s\frvic\f c\fnt\fr.
»    Liquid or st\fam must not b\f dir\fct\fd towards   
\fquipm\fnt containing \f\b\fctrica\b compon\fnts.
»    Do not pu\b\b or carry by cab\b\f, us\f cab\b\f as a hand\b\f, 
c\bos\f door on cab\b\f, or pu\b\b cab\b\f around sharp \fdg\fs   
or corn\frs.
»    Do not run app\bianc\f ov\fr cab\b\f.
»    K\f\fp cab\b\f away from h\fat\fd surfac\fs.
»    Do not unp\bug by pu\b\bing on cab\b\f.
»    t o unp\bug, grasp th\f p\bug, not th\f cab\b\f.
»    Do not hand\b\f p\bug or app\bianc\f with w\ft hands.
»    Do not put any obj\fct into op\fnings.
»    Do not us\f with any op\fning b\bock\fd; k\f\fp fr\f\f of 
dust, \bint, hair, and anything that may r\fduc\f air f\bow.
»    K\f\fp hair, \boos\f c\bothing, fing\frs, and a\b\b parts of   
body away from op\fnings and moving parts.
»    t urn off a\b\b contro\bs b\ffor\f unp\bugging.
»    Us\f \fxtra car\f wh\fn c\b\faning on stairs.
»    Do not us\f to pick up f\bammab\b\f or combustib\b\f   
\biquids, such as p\ftro\b, or us\f in ar\fas wh\fr\f th\fy   
may b\f pr\fs\fnt.
»    Do not pick up toxic mat\fria\b (ch\borin\f b\b\fach,   
ammonia, drain c\b\fan\fr, \ftc.)
»    Do not us\f app\bianc\f in an \fnc\bos\fd spac\f fi\b\b\fd   
with vapors giv\fn off by oi\b bas\f paint, som\f   
mothproofing substanc\fs, f\bammab\b\f dust, or oth\fr 
\fxp\bosiv\f or toxic vapors.
»    Do not pick up hard or sharp obj\fcts such as g\bass, 
nai\bs, scr\fws, coins, \ftc.
»    K\f\fp app\bianc\f on a \b\fv\f\b surfac\f.
»    Do not carry app\bianc\f whi\b\f in us\f.
»  Unp\bug b\ffor\f attaching th\f  turboBrush™ too\b.
»    if your app\bianc\f is fitt\fd with a nonr\fwir\fab\b\f Bs  
1363 p\bug it must not b\f us\fd un\b\fss a 13 amp (asta  
approv\fd to Bs 1362) fus\f is fitt\fd in th\f carri\fr   
contain\fd in th\f p\bug.  spar\fs may b\f obtain\fd from 
your BisseLL supp\bi\fr.  if for any r\fason th\f p\bug is cut 
off, it must b\f dispos\fd of, as it is an \f\b\fctric shock 
hazard shou\bd it b\f ins\frt\fd into a mains sock\ft.
READ  All INStRUctIoNS   
\fEfoRE  USING yoUR DEEp  clEANER.  
When using an electrical appliance, basic precautions should be 
observed, including the following.  
WARNING
AlWA ys connect to A properly eArthed 
electricAl socket.
WARNING
t o reduce the risk of fire, electric   
shock, or injury:
SAVE  tHESE INS tRUctIoNS   
foR  fUtURE USE
foR  opERA tIoN oN A \b\b0-\b40 V olt A.c. 50/60 Hz  poWER SUpply  oNly. 
This model is for household use only.
WARNING
to reduce the risk of fire And electric  
shock - do not eXpose to rAin.  store  
indoors.  do not immerse.  use only  
on cArpet moistened B y the cleAning 
process.  use only Bissell cleAning  
products intended for use With   
this mA chine. 
						

							1 Spray Trigger
2  Upper Handle
3    Upright Cleaning Mode  Indicator Light
4  Carry Handle
5    Cleaning Tool (tools vary by model)
6  Formula & Water Tank
7  Power Button
8  Quick Release™ Cord Wrap
9  Power Cord
10  Dirty Tank 11  
Flex Hose
12    Portable Spot Cleaning Release Pedal
13  EdgeSweep™ Brushes
14  Removeable Nozzle Assembly
15  Cord Clip
16  Tool Storage
17  Support Handle
18  Tool Storage (select models)
19  Hose Secure Latch
20  Recline Pedal
Product View
www. bissell.com
      4
16
15
17
18
19
20
2
3
67
45
11
10
1413
12
89
1 
						

							      www.
bissell.com5
Your deep clea\fer comes i\f two eas\b to   
assemble compo\fe\fts: 
A. Upper handle
B. Portable spot cleaner\fBase
The o\fl\b tool \bou will \feed to assemble \bour 
clea\fer is a lo\fg Phillips screwdriver.
1.  slide the upper ha\fdle o\fto the bod\b of  
the machi\fe b\b guidi\fg the 2 posts o\f the bod\b 
i\fto the ope\fi\fg o\f the upper ha\fdle.
2. Firml\b holdi\fg the upper ha\fdle i\f place, 
screw 2 screws i\fto the marked holes at a\f 
upward a\fgle above the support ha\fdle. 
3. At a\f upward a\fgle, screw the remai\fi\fg   
2 screws i\fto the marked outermost holes   
u\fder the support ha\fdle. 
\b. Wrap power cord arou\fd Quick Release   
Cord Wrap.
5. Wrap flex hose arou\fd the hose wrap a\fd 
secure with hose secure latch.
6. Alig\f the product as image 4/5 shows a\fd 
firml\b push dow\f the portable spot clea\fer   
u\ftil it is secured o\f both sides.
To further check if the portable spot clea\fer   
is secure, plug i\f a\fd tur\f o\f to verif\b that   
the upright clea\fi\fg mode i\fdicator light is   
illumi\fated.  if it does \fot illumi\fate, release the 
pod a\fd re-secure b\b pushi\fg firml\b u\ftil both 
sides s\fap i\fto place. 
7.  Check latches o\f both sides to co\ffirm   
it is secured. Refer to image 6. 
8.  s\fap attachme\ft(s) i\fto the back of u\fit.
NotE:  portable spot cleaner must be fully 
secure to operate in the upright cleaning mode.
cleaning fluid
Keep ple\ft\b of ge\fui\fe  bissell 2X clea\fi\fg 
formula o\f ha\fd so \bou ca\f clea\f a\fd protect 
whe\fever it fits \bour schedule. Alwa\bs use   
ge\fui\fe  bissell deep clea\fi\fg formulas.   
No\f-bissell clea\fi\fg formulas ma\b harm the 
machi\fe a\fd will void the guara\ftee.
Assembly
650 mL   
Stain Pretreat
#1147E
1.5L 2X Wash
& Refresh Natural 
Orange Formula
#1146E1.5 L 2X Wash & 
Protect PET Pet Stain 
 
& Odour Formula   
w/ Scotchgard
™
Protector  
#1087E
1.5 L 2X Wash & Protect 
 
PRO Professional   
Stain & Odour   
Formula w/   
Scotchgard™ Protector
#1089E 1.5 L 2X Wash 
 
& Protect Stain   
& Odour Formula 
w/ Scotchgard
™
Protector  
#1086E 1.5 L 2X Wash & 
Refresh Blossom & 
Breeze Fragrance 
Formula w/ 
 
Febreze® Freshness  
#1078E 1.5 L 2X Wash & 
Refresh Cotton 
 
Fresh Formula w/   
Febreze® Freshness  
#1079E
A.B.
1.
3.
6. 4./5.\b.
IMPORT
ANT
ASSEMBL Y INSTRUCTIONS
Use a minimum of a #2 x 4 or #2 x 100mm Philips screwdriver for assembl\
y.
Slide the upper handle onto 
the body of the machine by 
guiding the 2 posts on the 
body into the opening on 
the upper handle.Firmly holding the upper 
handle in place,  screw 2 
screws into the marked 
holes at an upward angle 
above the support handle.At an upward angle,  screw 
the remaining 2 screws into 
the marked outermost holes 
under the support handle.
IMPORT ANT
ASSEMBL Y INSTRUCTIONS
Use a minimum of a #2 x 4 or #2 x 100mm Philips screwdriver for assembl\
y.
Slide the upper handle onto 
the body of the machine by 
guiding the 2 posts on the 
body into the opening on 
the upper handle.Firmly holding the upper 
handle in place,  screw 2 
screws into the marked 
holes at an upward angle 
above the support handle.At an upward angle,  screw 
the remaining 2 screws into 
the marked outermost holes 
under the support handle.
IMPORT ANT
ASSEMBL Y INSTRUCTIONS
Use a minimum of a #2 x 4 or #2 x 100mm Philips screwdriver for assembl\
y.
Slide the upper handle onto 
the body of the machine by 
guiding the 2 posts on the 
body into the opening on 
the upper handle.Firmly holding the upper 
handle in place,  screw 2 
screws into the marked 
holes at an upward angle 
above the support handle.At an upward angle,  screw 
the remaining 2 screws into 
the marked outermost holes 
under the support handle.Cord   
side Hose 
 
side
WARNING
Do not plug in your cleaner until you have completely   
assembled it per the instructions and are familiar with all 
instructions and operating procedures.
WARNING
To reduce the risk of fire and electric shock due to internal 
component damage, use only BISSELL cleaning fluids 
intended for use with the deep cleaner.   
						

							Special features 
Innovative cleaning technologyThis i\f\fovative deep clea\fer offers two 
machi\fes i\f o\fe. The upright deep clea\fer  
uses brushes a\fd clea\fi\fg formula to   
maximise clea\fi\fg. The portable spot clea\fer 
detaches to clea\f tough spots a\fd stai\fs a\fd 
hard to reach areas. 
Heatwave  technology™This deep clea\fer features Heatwave Tech\folog\b 
to help mai\ftai\f the temperature of the ha\fd 
hot tap water \bou put i\f it to provide co\fsta\ft 
heat as \bou clea\f. The Heatwave Tech\folog\b 
automaticall\b tur\fs o\f whe\f \bou tur\f the 
machi\fe o\f. Heatwave Tech\folog\b operates i\f 
both upright a\fd portable clea\fi\fg modes.
Scotchgard™  protectorCarpet protectio\f applied at the mill t\bpicall\b 
wears dow\f over time from heav\b foot traffic   
a\fd ever\bda\b clea\fi\fg, i\fcludi\fg deep   
clea\fi\fg. To help restore this importa\ft   
protectio\f, o\fl\b  bissell offers deep clea\fi\fg 
formulas with  scotchgard protector. This offers 
extra protectio\f agai\fst dirt a\fd tough stai\fs   
to keep \bour carpets looki\fg good lo\fger. 
microban® antibacterial   
product protection
Microba\f a\ftibacterial product protectio\f is   
built i\fto ke\b compo\fe\fts to help preve\ft   
the growth of harmful commo\f household   
bacteria.  it helps to keep the u\fit fresher a\fd 
clea\fer betwee\f uses.
Operations
www. bissell.com
      6
» For easy carrying, 
grab the carry handle 
on the portable spot 
cleaner and balance   
with the supprt 
handle on the back 
of the machine.
Ti p  
						

							\fefore you clean
1. Pla\f activities to give \bour carpet time to dr\b. 
2. Move fur\fiture to a\fother area if clea\fi\fg   
a\f e\ftire room (optio\fal). 
3. Vacuum area with a dr\b vacuum clea\fer   
thoroughl\b before deep clea\fi\fg.
\b. Pla\f \bour clea\fi\fg route to leave a\f exit path. 
it is best to begi\f clea\fi\fg i\f the cor\fer farthest 
from \bour exit.
5. Pretreati\fg (optio\fal):
Pretreati\fg is recomme\fded to improve clea\fi\fg 
effective\fess for heavil\b soiled carpet i\f high   
traffic areas such as e\ftr\bwa\b a\fd hallwa\bs. 
To pretreat:
    a. Usi\fg the  bissell stai\f Pretreat,   
ge\ferousl\b spra\b eve\fl\b over soiled area.   
Do \fot overwet.
   b .   Wait 3-5 mi\futes before deep clea\fi\fg.
    c. Clea\f as \formal usi\fg \bour  bissell deep 
clea\fer, followi\fg the i\fstructio\fs below.
Operations
       www.
bissell.com7
WARNING
To reduce the risk of fire, use only BISSELL deep cleaning 
formula for full size machines in your deep cleaner. Use of 
cleaning formulas that contain lemon or pine oil may dam-
age this appliance and void the guarantee. Chemical spot 
cleaners or solvent-based soil removers should not be used. 
These products may react with the plastic materials used in 
your deep cleaner causing cracking or pitting. 
5a. 
						

							Operations
UpRIGHt clEANING moDE
filling formula & water tank
1. Remove ta\fk from the base of the machi\fe b\b 
lifti\fg up ta\fk carr\b ha\fdle. 
NotE:  this tank was designed with a flat   
bottom so it can be easily filled.
2.  U\fscrew the black cap a\fd remove bottle i\fsert.  
3.  Fill ta\fk with ha\fd hot (60°C/140°F MAX) 
tap water to the water fill li\fe. Add 60 ml of 
bissell 2X formula to the ta\fk.  Do not boil or 
microwave water as it can destroy the tank.
\b.  Replace the bottle i\fsert i\f the ta\fk a\fd   
tighte\f the black cap. Replace the ta\fk o\f the 
deep clea\fer. 
carpet cleaning
1.  Plug i\fto a proper outlet a\fd press the power 
butto\f. 
2.  With \bour foot, press the gra\b recli\fe   
pedal, located o\f the back of the u\fit i\f 
betwee\f the wheels. 
3.  While pressi\fg the spra\b trigger, make o\fe slow 
forward wet pass a\fd a\fother o\fe back.  caution: 
Do not overwet.  
\b.  Release the spra\b trigger a\fd make o\fe slow 
forward a\fd backward pass over the same area. 
5.  Repeat clea\fi\fg passes u\ftil solutio\f bei\fg 
suctio\fed up appears clea\f. Co\fti\fue passes 
without pressi\fg the spra\b trigger u\ftil \bou 
ca\f’t see a\f\b more water bei\fg suctio\fed up. 
Repeated passes will help aid i\f dr\b time. 
NotE:  your machine may be equipped with a 
circuit breaker that will automatically shut off 
the brush if a large or loose object is caught 
in the brush roll. If that happens, be sure to 
unplug your machine, remove the foreign 
object, and then plug the machine back in to 
reset the circuit breaker. 
Empty dirty tank
1.  Whe\f the dirt\b ta\fk reaches the  “FULL” li\fe  
o\f the ta\fk, it is time to empt\b. 
2.  Remove dirt\b ta\fk a\fd carr\b to a utilit\b si\fk, 
toilet or outside (where \bou will   
dispose of the dirt\b water). 
3.  To u\flock the dirt\b ta\fk lid, rotate ha\fdle 
over the back of the ta\fk. Remove lid a\fd pour 
out dirt\b water. Ri\fse out dirt\b ta\fk to remove 
a\f\b debris. 
\b.  Replace top of ta\fk, a\fd rotate the ha\fdle 
forward to lock i\f place o\f fro\ft of ta\fk. 
5.  before replaci\fg ta\fk o\f machi\fe, wipe debris 
from red filter.
www. bissell.com
   
   8
cAUtIoN
Take care not to run over loose objects or edges of area rugs. 
Stalling the brush may result in premature belt failure. 
cAUtIoN
Brush may unexpectedly restart. To reduce the risk of injury 
from moving parts, unplug before cleaning or servicing.
AttENtIoNSome Berber carpets have a tendency to fuzz with wear. 
Repeated strokes in the same area with an ordinary 
vacuum or deep cleaner may aggravate this condition. 
1. \b.
\b.
5. 3.
4. 
						

							cleaning your machine
1. Flush out machi\fe of a\f\b remai\fi\fg residual 
solutio\f. 
   a. Fill the formula & water ta\fk with ha\fd 
hot (60°C/140°F MAX) tap water a\fd tur\f 
o\f \bour machi\fe.
   b. Recli\fe ha\fdle a\fd press the spra\b trigger 
for about 15 seco\fds while maki\fg forward 
a\fd backward passes o\f carpet. Co\fti\fue 
without pressi\fg the spra\b trigger u\ftil there 
is \fo more water bei\fg suctio\fed up. 
   c. Tur\f off the machi\fe a\fd wrap the power 
cord. Make sure the dirt\b ta\fk a\fd the   
formula & water ta\fk are emptied, ri\fsed, 
a\fd dried before the \fext use.
   d. before \bou replace ta\fk, clea\f all debris 
from red filter scree\f.  
2.  Ri\fse \fozzle assembl\b of a\f\b dirt a\fd debris. 
   a. Remove portable spot clea\fer from the 
base of the machi\fe. 
   b .  Remove the \fozzle assembl\b from the 
machi\fe b\b u\fscrewi\fg 3 screws a\fd lifti\fg 
awa\b the upper a\fd lower \fozzle. 
    c. Ri\fse upper a\fd lower \fozzles out at the 
faucet. 
   
d. Place lower \fozzle back o\fto the machi\fe 
b\b hooki\fg the tabs i\fto the holes o\f the 
bottom sides of the fro\ft of the machi\fe.
   e. Place upper \fozzle o\fto the lower \fozzle 
b\b hooki\fg the tabs i\fto the holes o\f the fro\ft 
of the lower \fozzle.  secure with 3 screws.
3.  The i\fside of the e\fd caps ca\f be wiped   
out with a clea\f paper towel, or for a more 
thorough clea\f, the e\fd caps ca\f be take\f   
off a\fd ri\fsed clea\f. 
\b. A\f\b loose hair or debris ca\f be pulled from 
the brush rolls a\fd throw\f awa\b. For a more 
thorough clea\f, follow directio\fs o\f page 13 
for removal of brush rolls. Your machi\fe is \fow 
read\b to be stored. 
No Te: Store cleaner in a protected, dry area. 
Since this product uses water, it must not be 
stored where there is a danger of freezing. 
Freezing will damage internal components 
and void the guarantee.
Operations
       www.
bissell.com9
\bb.
\be. \bd.
WARNING
To reduce the risk of electric shock, turn power switch 
off and disconnect plug from electrical outlet before 
performing maintenance or troubleshooting checks.
» For best results empty,   
rinse and dry both tanks 
before storing. 
Ti p
» Let all parts dry completely 
before replacing back  
onto machine.
Ti p
l o\fger 
screw
shorter  screws  
						

							Adsdfdd ghg bvh
cvbbj  jkn hnbj  jkvh
gcg hhjj   jhffhl k llgh
Ma\fufacturer’s tag
poRt A\flE  Spot clEANING moDE
preparing the machine
1. step o\f the portable spot clea\fi\fg pedal   
to release the portable spot clea\fer.  
2.  Release flex hose b\b twisti\fg the hose secure 
latch clockwise. U\fwrap flex hose completel\b. 
3.  Attach the desired clea\fi\fg tool to the hose 
grip u\ftil it s\faps together. Make certai\f the tool 
is securel\b attached. 
\b.  Twist the Quick Release cord wrap clockwise 
to u\fwrap the power cord completel\b a\fd plug 
i\fto grou\fded outlet.
filling tank
cleaning with  toolsImportant! If using to clean upholstery, check 
upholstery tags.  check manufacturer’s tag 
before cleaning. “W” or “WS” on the tag means 
you can use your deep cleaner. If the tag is 
coded with an “X” or an “S” (with a diagonal 
stripe through it), or says “Dry  clean only”, do 
not proceed with any deep cleaning machine. 
Do not use on velvet or silk. If manufacturer’s 
tag is missing or not coded, check with your 
furniture dealer.”)
1.  Follow the i\fstructio\fs for filli\fg the ta\fk i\f 
the upright clea\fi\fg mode sectio\f o\f page 8.
2.  Attach clea\fi\fg tool of \bour choice to e\fd   
of hose.
NotE: If you deep cleaner came with a 
Deep Reach  tool, do not follow the cleaning 
tool instructions below. Instead, follow the 
“cleaning with Deep Reach  tool” instructions   
in the next section.
3.  Hold the tool approximatel\b 2.5 cm above the 
soiled surface. Press the spra\b trigger to appl\b 
the clea\fi\fg solutio\f to the soiled area.  caution: 
Do Not  overwet.
NotE: Hold end of hose below the tank water 
level to help prime the portable spot cleaner.
\b.  Usi\fg the brush o\f the tool, ge\ftl\b scrub   
the area to be clea\fed. 
5.  Appl\b dow\fward pressure o\f the tool a\fd pull 
it toward \bou. The suctio\f will remove the dirt 
a\fd clea\fi\fg solutio\f. Co\fti\fue u\ftil \fo more 
dirt ca\f be removed.
Operations
www. bissell.com
      10
ImpoRtANtCheck for colourfastness in an inconspicuous place. If 
possible, check upholstery stuffing. Coloured stuffing may 
bleed through fabric when it becomes wet.