Bosch Glm 100 C Manual

 English | 23
Bosch Power Tools2 609 141 026 | (1.7.13)
gBattery charge-control indicator
hLaser, switched on
iMeasurement reference level
kTemperature warning
lBluetooth® switched on
mCharging procedure
nSlow charging procedure
The Bluetooth® word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such 
marks by Robert Bosch Ltd. is under license.
Declaration of Conformity  
We declare under our sole responsibility that the product de-
scribed under “Technical Data”...

24 | English 
2 609 141 026 | (1.7.13)Bosch Power Tools
Do not subject the measuring tool to extreme tempera-
tures or variations in temperature. As an example, do 
not leave it in vehicles for long time. In case of large varia-
tions in temperature, allow the measuring tool to adjust to 
the ambient temperature before putting it into operation. 
In case of extreme temperatures or variations in tempera-
ture, the accuracy of the measuring tool can be impaired.
Avoid heavy impact to or falling down of...

 English | 25
Bosch Power Tools2 609 141 026 | (1.7.13)
With exception of the “Permanent laser beam” setting, all ba-
sic settings are retained when switching off.
Continuous Laser Beam
Do not point the laser beam at persons or animals and 
do not look into the laser beam yourself, not even from 
a large distance.
In this setting, the laser beam also remains switched on be-
tween measurements; for measuring, it is only required to 
press the measuring button 2 once.
Measuring Functions
Simple Length...

26 | English 
2 609 141 026 | (1.7.13)Bosch Power Tools
Continuous measurement automatically switches off after 
5 min. The last measured value remains indicated in the result 
line c.
Indirect Distance Measurement
Note: Indirect distance measurement is always less accurate 
than direct distance measurement. Depending on applica-
tion, greater measuring errors are possible than with direct 
distance measurement. To improve the measuring accuracy, 
we recommend using a tripod (accessory).
The indirect...

 English | 27
Bosch Power Tools2 609 141 026 | (1.7.13)
If the “digital vial” function is activated in the basic settings, 
the grade value is also displayed in the other measuring func-
tions in line d of display 1.
Timer Function
The timer function is helpful, when, for example, movements 
of the measuring tool during measuring are to be prevented.
To activate the timer function, press and hold button 6 until 
the   indicator appears in the display.
The time period from the actuation until the...

28 | English 
2 609 141 026 | (1.7.13)Bosch Power Tools
Activating the Bluetooth® Interface for Data Transmission 
to a Mobile Terminal/Device
To activate the Bluetooth® interface, press the measuring 
tool’s Bluetooth® button 13. Make sure that the Bluetooth® in-
terface on your mobile terminal/device is activated.
Special Bosch applications (apps) are available to extend the 
functional range of the mobile terminal/device and for simpli-
fication of the data processing. Depending on terminal/de-
vice,...

 English | 29
Bosch Power Tools2 609 141 026 | (1.7.13)
Accuracy Check of the Distance Measurement
The accuracy of the distance measurement can be checked as 
follows:
– Select a permanently unchangeable measuring section 
with a length of approx. 1 to 10 metres; its length must be 
precisely known (e. g. the width of a room or a door open-
ing). The measuring distance must be indoors; the target 
surface for the measurement must be smooth and reflect 
well.
–Measure the distance 10 times after another....

30 | English 
2 609 141 026 | (1.7.13)Bosch Power Tools
The measuring tool monitors the correct 
function for each measurement. When a de-
fect is determined, only the symbol shown 
aside flashes in the display. In this case, or 
when the above mentioned corrective 
measures cannot correct an error, have the 
measuring tool checked by an after-sales service agent for 
Bosch power tools.
Maintenance and Service
Maintenance and Cleaning
Store and transport the measuring tool only in the supplied...

 English | 31
Bosch Power Tools2 609 141 026 | (1.7.13)
Bosch’s application service team will gladly answer questions 
concerning our products and their accessories.
In all correspondence and spare parts orders, please always 
include the 10-digit article number given on the type plate of 
the measuring tool.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail:...