Brother DCP 7030 User Manual

Making copies
25
4
Using the Options key4
Use the Options key to quickly set the following copy settings temporarily for the next copy.
Improving copy quality4
You can choose from a range of quality 
settings. The default setting is Auto.
„Auto
Auto is the recommended mode for 
ordinary printouts. Suitable for documents 
that contain both text and photographs.
„Text
Suitable for documents containing only 
text.
„Photo
Suitable for copying photographs.To temporarily change the quality setting, 
follow the...

Chapter 4
26
To change the default setting, follow the 
steps below:
aPress Menu.
bPress a or b to choose 2.Copy.
Press OK.
cPress a or b to choose 1.Quality.
Press OK.
dPress a or b to choose the copy quality.
PressOK.
ePress Stop/Exit.
Sorting copies using the ADF 
(DCP-7040 only)4
You can sort multiple copies. Pages will be 
stacked in the order 1 2 3, 1 2 3, 1 2 3, and so 
on.
aLoad your document in the ADF.
bEnter the number of copies you want.
cPress Options and a or b to choose 
Stack/Sort....

Making copies
27
4
iAfter all the pages have been scanned, 
press b in h to finish.
(DCP-7040 only) If you are copying 
from the ADF:
4
Insert your document face up in the direction 
shown below:
„2 in 1 (P)
 
„2 in 1 (L)
 
„4 in 1 (P)
 
„4 in 1 (L)
 
If you are copying from the scanner 
glass:
4
Insert your document face down in the 
direction shown below:
„2 in 1 (P)
 
„2 in 1 (L)
 
„4 in 1 (P)
 
„4 in 1 (L)
 
Out of memory 
message
4
If the memory becomes full while you are 
making copies, the LCD...

Chapter 4
28
 

Section III
SoftwareIII
Software features30
 

30
5
The User’s Guide on the CD-ROM includes 
User’s Guide and Software User’s Guide  
for features available when connected to a 
computer (for example, printing and 
scanning). These guides have easy to use 
links that, when clicked, will take you directly 
to a particular section.
You can find information on these features:
„ Printing
„ Scanning
„ ControlCenter3 (for Windows
®)
„ ControlCenter2 (for Macintosh
®)
Note
See  Accessing the Software User’s Guide  
on page 3.
 
How to read HTML 
User’s...

Software features31
5
For Macintosh®5
aMake sure your Macintosh® is turned 
on. Insert the Brother CD-ROM into your 
CD-ROM drive.
bDouble-click the  Documentation icon.
cDouble-click your language folder, and 
then double-click the top page file.
dClick on the manual you want (USER’S 
GUIDE
 or SOFTWARE USER’S GUIDE) 
in the top menu, and then click the 
heading you would like to read from the 
list at the left of the window.
 
 

Chapter 5
32
 

Section IV
AppendixesIV
Safety and legal34
Troubleshooting and routine maintenance43
Menu and features76
Specifications80
Glossary88
 

34
A
Choosing a locationA
Place your machine on a flat, stable surface that is free of vibration. Put the machine near a 
standard, grounded electrical socket. Choose a location where the temperature remains between 
10° C and 32.5° C and the humidity is between 20% to 80% (without condensation).
„Make sure cables leading to the machine do not constitute a trip hazard.
„Avoid placing your machine on the carpet.
„Do not place near heaters, air conditioners, water, chemicals or refrigerators.
„Do not...