Canon 5dsr Manual

							341
Q Quick Control for Playback
To rotate an image, set [ 51: Auto rotate ] to [OnzD ]. If [ OnD] or [ Off] is 
set, the [ b Rotate image ] setting will be recorded to the image, but the 
camera will not rotate the image for display.
 Pressing the < Q> button during the index display will switch to the 
single-image display and the Quick Control screen will appear. Pressing 
the < Q> button again will return to the index display.
 For images taken with another camera, the options you can select may 
be restricted. 
						

							342
You can play back movies in the following three ways:By connecting the camera to a TV set 
with HDMI Cable HTC-100 (sold 
separately), you can play back the 
camera’s still photos and movies on the 
TV set.
You can play back movies on the 
camera’s LCD monitor. You can also edit 
out the movie’s first and last scenes, and 
play back the still photos and movies on 
the card in an automatic slide show.
k Enjoying Movies
Playback on a TV Set(p.351)
Playback on the Camera’s LCD Monitor(p.344-345)
 Since hard disk recorders do not have an HDMI IN port, the camera 
cannot be connected to a hard disk recorder with an HDMI cable.
 Even if the camera is connected to a hard disk recorder with a USB 
cable, movies and still photos cannot be played back or saved.
A movie edited with a computer cannot be rewritten to the card and played 
back with the camera. 
						

							343
k Enjoying Movies
To play back or edit a movie, use pre-
installed or general-purpose software, 
compatible with the movie’s recording 
format.
Playback and Editing with a Computer
If you play back or edit a movie with commercially-available software, use 
software compatible with MOV-format movies. For details on commercially-
available software, contact the software manufacturer. 
						

							344
1Play back the image.
Press the < x> button to display an 
image.
2Select a movie.
 Turn the < 5> dial to select the 
movie to be played.
 With the single-image display, the 
 icon displayed on the 
upper left indicates a movie.

In the index display, perforations at the 
left edge of a thumbnail indicate a 
movie. 
As movies cannot be played 
from the index display, press  
to switch to the single-image display.
3In the single-image display, press 
< 0>.
 The movie playback panel will appear 
at the bottom of the screen.
4Play back the movie.
 Select [ 7] (Play), then press < 0>.
 The movie will start playing back.
 You can pause the movie playback by 
pressing < 0>.
 You can adjust the sound volume 
during movie playback by turning the 
 dial.
 For more details on the playback 
procedure, see the next page.
k  Playing Back Movies
Speaker
The camera may not be able to play back movies shot with another camera. 
						

							345
k Playing Back Movies
Movie Playback Panel
OperationPlayback Description
7 PlayPressing  toggles between play and stop.
8 Slow motionAdjust the slow motion speed by turning the < 5> dial. 
The slow motion speed is indicated on the upper right of 
the screen.
5  First frameDisplays the movie’s first frame.
3  Previous frameEach time you press < 0>, the previous frame is 
displayed. If you hold down < 0>, it will rewind the movie.
6  Next frameEach time you press < 0>, the movie will play frame-by-
frame. If you hold down < 0>, it will fast forward the 
movie.
4  Last frameDisplays the movie’s last frame.
X  EditDisplays the editing screen (p.346).
Playback position
mm’ ss”Playback time (minutes:seconds with [ Movie play count: 
Rec time ] set)
hh:mm:ss.ff  (DF)
hh:mm:ss:ff  (NDF)Time code (hours:minutes:seconds:frames with [ Movie 
play count: Time code ] set)
9 Vo l u m eTurn the  dial to adjust the volume of the built-in 
speaker (p.344).
3 2To return to the single-image display, press the < M> 
button.
 With a fully-charged Battery Pack LP-E6N, the continuous playback time 
at room temperature (23°C/73°F) will be approx. 3 hr. 20 min.
 If you connect the camera to a TV set to play back a movie (p.351), 
adjust the sound volume with the TV set. (Turning the < 6> dial will not 
change the sound volume.) If there is audio feedback, place the camera 
farther away from the TV set or turn down the TV sound volume.
 If you take a still photo during movie shooting, the still photo will be 
displayed for approx. 1 sec. during the movie playback. 
						

							346
You can edit out the first and last scenes of a movie in approx. 1-sec. increments. You can also edit time-lapse movies.
1On the movie playback screen, 
select [X].
 The movie editing panel will be 
displayed at the bottom of the screen.
2Specify the part to be edited out.
 Select either [ U] (Cut beginning) or 
[V ] (Cut end), then press < 0>.
 Tilt < 9> to the left or right to see the 
previous or next frames. Holding 
down the key will fast forward or fast 
rewind the frames. Turn the < 5> dial 
for frame-by-frame playback.
 After deciding which part to edit out, 
press < 0>. The portion highlighted 
in white on the top of the screen is 
what will remain.
3Check the edited movie.
 Select [ 7] and press < 0> to play 
back the edited movie.
 To change the editing, go back to step 
2.
 To cancel the editing, press the 
 button, then select [ OK] on 
the confirmation dialog.
X  Editing a Movie’s First and Last Scenes 
						

							347
X Editing a Movie’s First and Last Scenes
4Save the edited movie.
 Select [ W], then press < 0>.
 The save screen will appear.
 To save it as a new movie, select 
[New file ]. To save it and overwrite 
the original movie file, select 
[Overwrite ], then press < 0>.
 On the confirmation dialog, select 
[OK ] to save the edited movie and 
return to the movie playback screen.
 Since the editing is performed in ap prox. 1-sec. increments (position 
indicated by [ ] on the top of the screen), the actual position where the 
movie is edited may differ fr om the position you specified.
 If the card does not have enough free space, [ New file] will not be 
available.
 When the battery level is low, movie editing is not possible. Use a fully-
charged battery.
 Movies shot with another camera cannot be edited with this camera. 
						

							348
You can play back the images on the card as an automatic slide show.
1Select [Slide show].
Under the [3 2] tab, select [Slide 
show ], then press < 0>.
2Select the images to be played 
back.
 Select the desired option on the 
screen, then press .
All images/Movies/Stills/Protect
 Select one of the following: [ jAll 
images] [k Movies] [zStills ] 
[J Protect]. Then press < 0>.
Date/Folder/Rating
 Select one of the following: [ iDate ] 
[
nFolder ] [9Rating ].
 When < zH> is highlighted, 
press the < B> button.
 Select the desired setting, then press 
.
3  Slide Show (Auto Playback)
Number of images to be played 
back
Date Folder Rating 
						

							349
3 Slide Show (Auto Playback)
3Configure [Set up] as desired.
Select [ Set up], then press < 0>.
 Set the [Display time] and [ Repeat] 
settings for still photos.
 After completing the settings, press 
the < M > button.
ItemPlayback Description
jAll imagesAll the still photos and movies  on the card will be played 
back.
i DateStill photos and movies taken on the selected shooting date 
will be played back.
n FolderStill photos and movies in the selected folder will be played 
back.
kMoviesOnly the movies on the card will be played back.
zStillsOnly the still photos on  the card will be played back.
JProtectedOnly the protected still photos and movies on the card will be 
played back.
9RatingOnly the still photos and movi es with the selected rating will 
be played back.
Display time Repeat
The images on the card selected for [ Record/play] or [Playback ] under 
[ 5 1: Record func+card/folder sel. ] will be played back. 
						

							3 Slide Show (Auto Playback)
350
4Start the slide show.
Select [ Start], then press < 0>.
 After [ Loading image... ] is displayed, 
the slide show will start.
5Exit the slide show.
 To exit the slide show and return to 
the setting screen, press the < M> 
button.
 To pause the slide show, press < 0>. During pause, [ G] will be 
displayed on the upper left of the image. Press < 0> again to resume 
the slide show.
 During auto playback, you can press the < B> button to change the 
still photo display format (p.320).
 During movie playback, you can adjust the sound volume by turning the 
 dial.
 During auto playback or pause, you can turn the < 5> dial to view 
another image.
 During auto playback, auto power off will not take effect.
 The display time may vary depending on the image.
 To view the slide show on a TV set, see page 351.