Canon Digital IXUS 220 HS User Manual

							Safety Precautions
11
•Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of 
electronic instruments and other devices. Exercise adequate caution when using the 
camera in places where use of electronic devices is restricted, such as inside airplanes 
and medical facilities.
•Do not play the supplied CD-ROM(s) in any CD player that does not support data 
CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the loud sounds of 
a CD-ROM played on a music CD player. Additionally, playing the CD-ROM(s) in an audio 
CD player (music player) could damage the speakers.
 CautionDenotes the possibility of injury.
•Be careful not to bang the camera or subject it to strong impacts or shocks when 
hanging it by the strap.
•Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
•Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
•When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
•Avoid using, placing or storing the product in the following places:
- Places subject to strong sunlight
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery, resulting in 
electrical shock, fire, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger casing.
•The slideshow transition effects may cause discomfort when viewed for 
prolonged periods.
CautionDenotes the possibility of damage to the equipment.
•Do not aim the camera at bright light sources (such as the sun on a clear day).
Doing so may damage the image sensor.
•When using the camera on a beach or at a windy location, be careful not to allow 
dust or sand to enter the camera.
This may cause the product to malfunction.
 
						

							Safety Precautions
12
•In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the 
front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from 
the flash to prevent heat build-up and damage to the unit.
•Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
•Before you discard the battery, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
•Unplug the battery charger from the power outlet after charging is complete, or 
when you are not using it.
•Do not place anything, such as cloth on top of the battery charger while it is 
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort, 
resulting in fire.
•Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or 
damage.
•Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the screen.
•When putting the camera in your bag, ensure that hard objects do not come into 
contact with the screen.
•Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
 
						

							13
Getting Started
This chapter explains preparations before shooting, how to shoot in 
A mode, and then how to view and erase the images you take. The 
latter part of this chapter explains how to shoot and view movies and 
transfer images to a computer.
Attaching the Strap/Holding the Camera
•Attach the included strap and wrap it around your wrist to avoid dropping 
the camera during use.
•Keep your arms tight against your body while holding the camera firmly by 
the sides when shooting. Be sure that your fingers do not block the flash.
1
Strap
 
						

							14
Use the included charger to charge the battery. Be sure to charge the battery 
as it is not charged at the time of purchase.
Remove the cover.
Insert the battery.
zAlign the o marks on the battery and 
charger, then insert the battery by sliding it 
in ( ) and down ( ).
Charge the battery.
zFor CB-2LV: Flip out the plug ( ) and 
plug the charger into a power outlet ( ).
zFor CB-2LVE: Plug the power cord into 
the charger, then plug the other end into a 
power outlet.
XThe charge lamp lights orange and 
charging starts.
XThe charge lamp will light green when 
charging has finished. Charging takes 
approx. 1 hour and 30 minutes.
Remove the battery.
zUnplug the battery charger from the power 
outlet, then remove the battery by sliding it 
in ( ) and up ( ).
Charging the Battery
CB-2LV
CB-2LVE
To protect the battery and prolong its life, do not charge it for longer than 
24 hours continuously.
 
						

							Charging the Battery
15
Number of Possible Shots
•The number of shots that can be taken is based on the Camera & Imaging Products 
Association (CIPA) measurement standard.
•Under some shooting conditions, the number of shots that can be taken may be less 
than mentioned above.
Battery Charge Indicator
An icon or message will appear on the screen indicating the battery’s charge 
state.
Number of Shots
Approx. 220
Playback TimeApprox. 5 hours
DisplaySummary
Sufficient charge.
Slightly depleted, but sufficient.
(Blinking red) Nearly depleted. Charge the battery.
“Change the battery pack.” Depleted. Recharge the battery.
Using the battery and charger effectively
•Charge the battery on the day, or the day before, it will be used.
Charged batteries continue to discharge naturally even if they are not used.
•How to store the battery for long periods:
Deplete and remove the battery from the camera. Attach the terminal cover and 
store the battery. Storing a battery for long periods of time (about a year) without 
depleting it may shorten its life span or affect its performance.
•The battery charger can also be used when abroad.
The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power. 
If the plug does not fit the outlet, use a commercially available plug adapter. Do 
not use electrical transformers for foreign travel as they will cause damage.
•The battery may develop a bulge.
This is a normal characteristic of the battery and does not indicate a problem. 
However, if the battery bulges to the point where it will no longer fit into the 
camera, please contact a Canon Customer Support Help Desk.
•If the battery is quickly depleted even after charging, it has reached the end of 
its life span. Purchase a new battery.
Attach the cover to a charged battery so that 
the o mark is visible.
 
						

							16
The cards below can be used without restrictions on their capacities.
•SD memory cards*
•SDHC memory cards*
•SDXC memory cards *
•MultiMediaCards
•MMCplus memory cards
•HC MMCplus memory cards
•Eye-Fi Cards
* This memory card complies with the SD standards. Some cards may not operate 
properly depending on the brand of card used.
About Eye-Fi Cards
This product is not guaranteed to support Eye-Fi card functions (including 
wireless transfer). In case of an issue with an Eye-Fi card, please check with 
the card manufacturer.
Also note that an approval is required to use Eye-Fi cards in many countries 
or regions. Without approval, use of the card is not permitted. If it is unclear 
whether the card has been approved for use in the area, please check with 
the card manufacturer.
Insert the included battery and a memory card (sold separately).
Check the card’s write-protect tab.
zIf the memory card has a write-protect tab, 
you will not be able to record images if the 
tab is in the locked position. Slide the tab 
up until you hear a click.
Open the cover.
zSlide the cover ( ) and open it ( ).
Depending on your computer’s OS version, SDXC memory cards may not 
be recognized even when using a commercially available card reader. 
Check to make sure that your OS supports SDXC memory cards 
beforehand.
Compatible Memory Cards (Sold Separately)
Inserting the Battery and Memory Card
 
						

							Inserting the Battery and Memory Card
17
Insert the battery.
zPress the battery lock in the direction of the 
arrow, then insert the battery as shown 
until it locks into place with a click.
zBe sure to insert the battery in the correct 
direction or it will not properly lock into 
place.
Insert the memory card.
zInsert the memory card as shown until it 
locks into place with a click.
zBe sure the memory card is oriented 
correctly. Inserting the memory card in the 
wrong direction could damage the camera.
Close the cover.
zClose the cover ( ), and press downward 
as you slide it until it clicks into place ( ).
Terminals Battery 
lock
Terminals
What if [Memory card locked] appears on the screen? 
SD, SDHC, SDXC memory cards, and Eye-Fi cards have a write-protect tab. If 
this tab is in the locked position, [Memory card locked] will appear on the screen 
and you will not be able to take or erase images.
 
						

							Inserting the Battery and Memory Card
18
Removing the Battery and Memory Card
Remove the battery.
zOpen the cover and press the battery lock 
in the direction of the arrow.
XThe battery will pop up.
Remove the memory card.
zPush the memory card in until you hear a 
click, then slowly release it.
XThe memory card will pop up.
Number of Shots per Memory Card
•Values are based on the default settings.
•The number of shots that can be taken will vary depending on camera settings, the 
subject and the memory card used.
Memory Card
4GB 16GB
Number of ShotsApprox. 1231 Approx. 5042
Can you check the number of shots that can be taken?
You can check the number of shots that can be taken when the camera is in a 
Shooting mode (p. 24).
Number of shots that can be taken
 
						

							19
The Date/Time settings screen will appear the first time the camera is turned 
on. Since the dates and times recorded into your images are based on these 
settings, be sure to set them.
Turn on the camera.
zPress the ON/OFF button.XThe Date/Time screen will appear.
Set the date and time.
zPress the qr buttons to choose an option.zPress the op buttons to set a value.
Complete the setting.
zPress the m button.XOnce the date and time have been set, the 
Date/Time screen will close.
zPressing the ON/OFF button will turn off 
the camera.
Setting the Date and Time
Reappearing Date/Time screen
Set the correct date and time. If you have not set the date and time, the Date/Time 
screen will appear each time you turn on the camera.
Daylight saving time settings
If you choose   in Step 2 and press the op buttons to choose  , you will set 
the time to daylight saving (1 hour ahead).
 
						

							Setting the Date and Time
20
Changing the Date and Time
You can change the current date and time settings.
Display the menu.
zPress the n button.
Choose [Date/Time].
zMove the zoom lever to choose the 3 tab.zPress the op buttons to choose [Date/
Time], then press the m button.
Change the date and time.
zFollow Steps 2 and 3 on p. 19 to adjust the 
setting.
zPress the n button to close the menu.
Date/Time battery
•The camera has a built-in date/time battery (backup battery) that allows the 
date/time settings to be retained for about three weeks after the battery pack 
has been removed.
•By inserting a charged battery or connecting an AC adapter kit (sold separately, 
p. 38) the date/time battery can be charged in about 4 hours even if the camera 
is not turned on.
•If the date/time battery is depleted, the Date/Time screen will appear when you 
turn the camera on. Follow the steps on p. 19 to set the date and time.