Canon EOS 6D Instruction Manual

							251
You can play back movies in the following three ways:Use the provided AV cable or an HDMI 
Cable HTC-100 (sold separately) to 
connect the camera to a TV set. Then 
you can play back captured movies and 
still photos on the TV.
If you have a High-Definition TV set and 
connect your camera with an HDMI 
cable, you can watch Full High-Definition 
(Full HD: 1920x1080) and High-
Definition (HD: 1280x720) movies with 
higher image quality.
You can play back movies on the 
camera’s LCD monitor. You can also edit 
out the movie’s first and last scenes, and 
play back the still photos and movies on 
the card in an automatic slide show.
k Enjoying Movies
Playback on a TV set(p.261, 264)
Playback on the Camera’s LCD Monitor(p.253-260)
 Since hard disk recorder s do not have an HDMI IN terminal, the camera 
cannot be connected to  a hard disk recorder with an HDMI cable.
  Even if you connect the ca mera to a hard disk recorder with a cable, you 
cannot play or save movies and images.
  If the playback device is  not compatible with MOV  files, the movie cannot 
be played.
A movie edited with a co mputer cannot be rewritte n to the card and played 
back with the camera. However, vide o snapshot albums edited with EOS 
Video Snapshot Task (p.232) ca n be played on the camera.
COPY  
						

							k Enjoying Movies
252
The movie files recorded on the card can 
be transferred to a computer and played 
with ImageBrowser EX (provided 
software).
Playback and Editing with a Computer(p.392)
 To have the movie play back smoothly on a computer, use a high-
performance computer. Regarding th e computer hardware requirements 
for ImageBrowser EX, re fer to the PDF file ImageBrowser EX User 
Guide.
  If you want to use commer cially-available software to play back or edit 
the movies, be sure it is compatib le with MOV files. For details on 
commercially-available software, co ntact the software manufacturer.
COPY  
						

							253
1Play back the image.
 Press the < x> button to display 
images.
2Select a movie.
  Turn the < 5> dial to select the 
movie to be played.
 
On the single-image display, the 
 icon displayed on the upper left 
indicates a movie. If the movie is a video 
snapshot, < > w ill be displayed.
 You can press the < B> button to 
switch to the shooting information 
display (p.238).
 
In the index display, perforations at the 
left edge of a thumbnail indicate a 
movie. 
As movies cannot be played 
on the index display, press <
0> to 
switch to the single-image display.
3In the single-image display, press .
XThe movie playback panel will appear 
at the bottom of the screen.
4Play back the movie.
  Select [7 ] (Play), then press < 0>.
XThe movie will start playing.
  You can pause the movie playback by 
pressing .
  You can adjust the sound volume by 
turning the < 6> dial even during 
movie playback.
  For more details on the playback 
procedure, see the next page.
k  Playing Movies
Speaker
The camera might not be able to play  movies shot by another camera.
COPY  
						

							k Playing Movies
254 Movie Playback Panel
* When background music is set, the movie’s sound will not be played.
OperationPlayback Description
7 PlayPressing < 0> toggles between play and stop.
8 Slow motionAdjust the slow motion  speed by pressing the < U> key. 
The slow-motion speed is indica ted at the upper right of the 
screen.
5  First frameDisplays the movie’s first frame.
3  Previous 
frameEach time you press < 0>, the previous frame is displayed. 
If you hold down , it will rewind the movie.
6 Next frameEach time you press < 0>, the movie will play frame-by-
frame. If you hold down < 0>, it will fast  forward the movie.
4 Last frameDisplays the movie’s last frame.
 Background 
music*Play back a movie with the selected background music 
(p.260).
X  EditDisplays the editing screen (p.255).
Playback position
mm’ ss”Playback time (minutes:seconds with [ Movie play count: 
Rec time ] set)
hh:mm:ss:ffTime code (hours:minutes :seconds:frames with [Movie play 
count: Time code ] set)
9 Vo l u m eYou can adjust the built-in sp eaker’s (p.253) volume by 
turning the < 6> dial.
3 2Pressing the < M> button returns to the single-image 
display.
  With a fully-charged Batt ery Pack LP-E6, the cont inuous playback time 
at room temperature (23°C/73°F) will  be as follows: approx. 4 hr. 15 min.
  If you connect the  camera to a TV set to pl ay a movie (p.261, 264), 
adjust the sound volume with the TV set. (Turning the < 6> dial will not 
change the sound volume.)
  If you took a still photo while you sh ot the movie, the still photo will be 
displayed for approx. 1 sec.  during the movie playback.
COPY  
						

							255
You can edit out the first and last scenes of a movie in 1-sec. 
increments.
1On the movie playback screen, 
select [X].
XThe movie editing panel will be 
displayed at the bottom of the screen.
2Specify the part to be edited out.
 Select either [ U] (Cut beginning) or 
[V ] (Cut end), then press < 0>.
  Press < U> (fast forward) or turn 
the < 5> dial (frame-by-frame) to 
specify the position where you want 
to delete the scene. On the bar at the 
top of the screen, you can see which 
part (indicated in orange) and how 
much will be deleted.
  After deciding which part to edit out, 
press < 0>.
3Check the edited movie.
  Select [7 ] and press < 0> to play 
back the edited movie.
 
To change the editing, go back to step 2.  To cancel the editing, press the 
 button, select [ OK] on the 
confirmation screen.
X Editing a Movie’s First and Last Scenes
COPY  
						

							X Editing a Movie’s First and Last Scenes
256
4Save the edited movie.
  Select [W ], then press < 0>.XThe save screen will appear.
  To save it as a new movie, select 
[New file ]. To save it and overwrite 
the original movie file, select 
[Overwrite ]. Then press < 0>.
  On the confirmation screen, select 
[OK ], then press < 0> to save the 
edited movie and return to the movie 
playback screen.
  Since the editing is performed in ap prox. 1-sec. increments (position 
indicated by [ ]), the actual positi on where the movie is edited may 
differ from the position you specified.
  If the card does not have  enough free space, [New file] will not be 
available.
  When the battery level is  low, editing the movie is not possible. Use a 
fully-charged battery.
COPY  
						

							257
You can play back the images on the card as an automatic slide show.
1Select [Slide show].
 Under the [ 32] tab, select [Slide 
show ], then press < 0>.
2Select the images to be played.
  Press the < V> key to select the 
desired option, then press < 0>.
[All images/Movies/Stills]
  Press the < V> key to select one of 
the following: [ jAll images/
k Movies/z Stills]. Then press 
< 0 >.
[Date/Folder/Rating]
  Press the < V> key to select one of 
the following: [ iDate/nFolder/
9 Rating].
  When < zH> is highlighted, 
press the < B> button.
  Press the < V> key to select the 
desired option, then press < 0>.
3  Slide Show (Auto Playback)
Number of images to be played
[Date ][ Folder][ Rating]
COPY  
						

							3 Slide Show (Auto Playback)
258
3Set [Set up] as desired.
 Press the < V> key to select [ Set 
up], then press < 0>.
  Set the [Display time], [ Repeat] 
(repeated playback), [ Transition 
effect ] (effect when changing 
images), and [ Background music ] 
for the still photos.
  The background music selection 
procedure is explained on page 260.
  After selecting the settings, press the 
 button.
ItemPlayback Description
jAll imagesAll the still photos and movies  on the card will be played 
back.
i DateStill photos and movies taken on the selected shooting 
date will be played back.
nFolderStill photos and movies in the selected folder will be 
played back.
k MoviesOnly the movies on the card will be played back.
zStillsOnly the still photos on  the card will be played back.
9RatingOnly the still photos and movi es with the selected rating 
will be played back.
[Display time] [Repeat]
COPY  
						

							259
3 Slide Show (Auto Playback)
4Start the slide show.
 Press the < V> key to select [ Start], 
then press < 0>.
XAfter [ Loading image... ] is displayed, 
the slide show will start.
5Exit the slide show.
  To exit the slide show and return to 
the setting screen, press the 
 button.
[Transition effect][Background music ]
 To pause the slide show, press < 0>. During pause, [ G] will be 
displayed on the upper left of the image. Press < 0> again to resume 
the slide show.
  During auto playback , you can press the  button to change the 
still photo display format (p.236).
  During movie playback, you can adjust  the sound volume by turning the 
 dial.
  During auto playback or  pause, you can turn the < 5> dial to view 
another image.
  During auto playback, auto  power off will not work.
  The display time may vary depending on the image.
  To view the slide show on  a TV set, see page 261.
COPY  
						

							3 Slide Show (Auto Playback)
260
1Select [Background music].
 Set [Background music ] to [On], 
then press < 0>.
2Select the background music.
  Press the < V> key to select the 
desired background music, then 
press < 0>. You can also select 
multiple background music tracks.
3Play the background music.
  To listen to a sample of the 
background music, press the 
 button.
  Press the < V> key to play another 
background music track. To stop 
listening to the background music, 
press the < B> button again.
  Adjust the sound volume by turning 
the < 6> dial.
  To delete a background music track, 
press the < V> key and select the 
track, then press the < L> button.
Selecting the Background Music
At the time of purchase , you cannot select background music with the 
camera. You must first use EOS Utilit y (provided software) to copy the 
background music to the card. For detail s, refer to the EOS Utility Instruction 
Manual on the CD-ROM.
COPY