Home > Canon > Printer > Canon I Sensys Lbp6030b User Guide

Canon I Sensys Lbp6030b User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Canon I Sensys Lbp6030b User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							0HWJ-03U
    When a Problem Cannot Be Solved
    If  a problem cannot  be resolved, contact your local authorized  Canon  dealer or the  Canon  help line.
    Do  not disassemble or repair  the machine yourself
    If  you disassemble or repair  the  machine yourself, it may  not  be covered by warranty.
    When Contacting  Canon
    When  contacting us, have the  following  information  ready.Product name (LBP6030w / LBP6030B / LBP6030)
    Dealer where you purchased  the  machine
    Details about  your problem (such as what you did, what happened  as a result, and  any messages that  were displayed)
    Serial  number (10 alphanumeric  characters  long, found  on  the  label on  the  back side  of the  machine)
    >Ý>â>Ý>Ì>Û>Ì>Þ>Ý>å
     
    						
    							0HWJ-03W
    Maintenance
    This chapter  describes  upkeep of the  machine, including how to  clean  the  machine and  print setting lists.
    Basic Maintenance Cleaning  the Machine
    The machine becomes dirty  Exterior
    Smudge marks appear  on  printouts 
    Fixing Unit
    Replacing Toner  Cartridges Replacing Toner  Cartridges
    If  you want to  use all of the  toner Using  Up All of the Toner
    How  to  replace  toner cartridges  
    How to Replace  Toner  Cartridges
    Printing Setting Lists
    If  you want to  print a list  of machine settings Printing Setting Lists
    Checking  the Total Pages  Printed by the Machine
    If  you want to  check  the  total number of pages printed by the  machine Viewing the Page Counter Value
    Initializing Settings
    If  you want to  restore settings to  the  factory defaults Initializing  Settings
    Relocating the Machine
    If  you want to  relocating the  machine for  maintenance or an  office  move Relocating  the Machine
    >Ý>â>Þ>Ì>Û>Ì>Þ>Ý>å
     
    						
    							0HWJ-03X
    Cleaning the Machine
    Clean the  machine regularly to  prevent  deterioration in printing quality  and  to  ensure  safe and  trouble -free operation. Carefully read  the
    safety instructions before you start cleaning. Maintenance and  Inspections
    Where to Clean
     Exterior  of the  machine and  ventilation slots
    Exterior
     Internal fixing unit
    Fixing Unit
    Regularly  wipe  the  exterior of the  machine to  keep  it in good condition.  Wipe  the  ventilation slots  regularly to  keep  it free of dust.
    Turn OFF  the machine, and  unplug  the power plug from the AC power outlet.
    When  you turn  OFF  the  machine, data that  is  waiting  to  be printed is  deleted.
    Wipe the exterior of the machine and  the ventilation slots.
    Use  a soft,  well-wrung-out  cloth dampened with water or a mild detergent diluted with water.
    For the  location of the  ventilation slots, see  
    Back Side .
    Wait for the exterior of the machine to dry completely.
    Plug the power cord back into the AC power outlet.
    Dirt  may  adhere  to  the  fixing unit  inside the  machine and  cause  smudges and  black streaks to  appear  on  printouts.  If  this occur s,
    proceed as follows to  clean  the  fixing unit. Note that  you cannot  clean  the  fixing when the  machine has documents waiting  to  be printed.
    To clean  the  fixing unit, you need normal A4  size paper.  Before starting, load A4  size paper  in the  multi -purpose tray. 
    Loading Paper
    in the Multi- Purpose Tray
    Select the machine by clicking   in the system  tray.
    Exterior
    Fixing Unit
    1
    2
    3
    4
    1
     
    >Ý>â>ß>Ì>Û>Ì>Þ>Ý>å
     
    						
    							Select [Options]  [Utility]  [Cleaning].
    Click [OK].
    The paper  is  fed slowly  into the  machine, and  cleaning  starts. The cleaning  is  done when the  paper  is  completely ejected.Cleaning  cannot  be cancelled  once it starts. Wait until it finishes (approx. 140 seconds).
    Cleaning  from the Remote UI
    You  can also  clean  the  fixing unit  from the  [Utility  Menu]  page of the  Remote  UI. Cleaning
    2
    3
    >Ý>â>à>Ì>Û>Ì>Þ>Ý>å
     
    						
    							0HWJ-041
    Replacing Toner Cartridges
    No warning  message appears, even when toner begins to  run  low. Use  the  printout symptoms described below as a guide to  when to
    replace  the  toner cartridge.  How to Replace  Toner  Cartridges
    White streaks appear Faded Uneven density
    Afterimages Appear  in Blank  Areas White Spots Appear
    When, of the  above  symptoms, one of "White streaks appear," "Faded," and  "Uneven  density"  appears, you may  be able  to
    continue printing for  a while longer  by taking the  steps in Using  Up All of the Toner.
    TIPS
    You  can specify  that  a message like the  one shown below be displayed when print quality  cannot  be guaranteed because  the
    toner cartridge  has reached its lifetime or for  some  other reason. This allows  you to  avoid  the  waste  of poor-quality  printouts ,
    because  you are  notified in advance  when the  time  comes to  replace  the  toner cartridge.  
    1Select the machine by clicking  in the system  tray.
    2Select [Options] [Device Settings]  [Warning Display Settings].
    3Select the [Display End  of Toner  Cartridge  Lifetime Warning] check box and  click [OK].
    >Ý>â>á>Ì>Û>Ì>Þ>Ý>å
     
    						
    							LINKS
    Consumables
    You  can continue printing when this message is  displayed,  but the  print quality  may  deteriorate.
    Even if  this message is  not  displayed,  use the  symptoms listed at the  top  of this page as a guide to
    replacing toner cartridges. Replace the  toner cartridge  when a symptom appears.
    >Ý>â>â>Ì>Û>Ì>Þ>Ý>å
     
    						
    							0HWJ-042
    Using Up All of the Toner
    Printout symptoms like the  following  appear  when toner begins to  run  low.White streaks appear Faded Uneven density
    When  symptoms like these appear, take the  following  steps.  They will  allow you to  use up  all of the  toner in the  toner cartridge.  You  will
    be able  to  continue printing for  a while longer, until the  toner runs out  completely. If  the  symptoms do not  improve  after you take the
    following  steps,  replace  the  toner cartridge  (
    How to Replace  Toner  Cartridges ). Before starting, read  the  safety instructions inMaintenance and  Inspections and  Consumables.
    Open the top cover.
    Remove  the toner  cartridge.
    Shake the toner  cartridge 5 or 6 times as shown below  to evenly distribute the toner  inside the cartridge.
    Replace the toner  cartridge.
    Align with the  toner cartridge  guide (), and  push  firmly all the  way  in.
    1
    2
    3
    4
    >Ý>â>ã>Ì>Û>Ì>Þ>Ý>å
     
    						
    							Close  the top cover.5
    >Ý>â>ä>Ì>Û>Ì>Þ>Ý>å
     
    						
    							0HWJ-043
    How to Replace Toner Cartridges
    Before replacing a toner cartridge,  read  the  precautions in Maintenance and  Inspectionsand  Consumables.
    Open the top cover.
    Remove  the toner  cartridge.
    Remove  the new toner  cartridge from the protective bag.
    Shake the toner  cartridge 5 or 6 times as shown below  to evenly distribute the toner  inside the cartridge,
    and  then place it  on a flat surface.
    Pull the sealing  tape straight out.
    The full length of the  sealing tape is  approximately  50 cm.
    1
    2
    3
    4
    5
    >Ý>â>å>Ì>Û>Ì>Þ>Ý>å
     
    						
    							When pulling  out  the sealing  tape
    If  any sealing tape remains  inside the  toner cartridge,  print quality  may  deteriorate.Do not  pull the  sealing tape at an  angle.  If  the  sealing tape breaks, you may  not  be able  to  pull it out  completely.
    If  the  sealing tape becomes stuck when pulling  it out, keep  pulling  until it is  completely removed.
    Replace the toner  cartridge.
    Align with the  toner cartridge  guide (), and  push  firmly all the  way  in.
    Close  the top cover.
    6
    7
    >Ý>ã>Ü>Ì>Û>Ì>Þ>Ý>å
     
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon I Sensys Lbp6030b User Guide