Canon I Sensys Lbp6030b User Guide

							0HWJ-026
Configuring for Printing from a Computer
When  using the  machine as a network printer, you can configure the  protocols and  ports used for  printing.  Before starting, make sure
that  you have completed all basic  preparations  for  printing (Printer Driver  Installation  Guide).
Printing  protocols are  rules for  delivering document data created on  a computer  to  the  machine. You  can select them according
to  the  printing purpose or the  network environment.
Ports  are  gateways for  passing printing data from a computer  to  the  machine. Incorrect  port settings are  often the  cause  when
documents cannot  be printed from a network computer.
Setting Up  a Print Server
By setting up  a print server  on  the  network, you can reduce  the  load on  the  computer  that  you print from. This also  makes it
possible to  install printer drivers over the  network, which saves the  trouble  of installing the  drivers on  each computer  by using
the  CD -ROM/DVD -ROM. For information  about  how to  set up  a print server, see  Printer Driver  Installation  Guide.
>ã>Ý>Ì>Û>Ì>Þ>Ý>å
 
						

							0HWJ-027
Configuring Printing Protocols and Web Services
The following  explains how to  configure printing protocols for  printing documents from computers. The protocols supported by the
machine are  LPD, RAW, and  WSD (Web Services on  Devices).
To change protocol port numbers  Changing Port Numbers
Start  the Remote UI  and  log  on in System Manager Mode.  Starting the Remote UI
Click [Settings/Registration].
Click [Network Settings]  [TCP/IP  Settings].
Configure the printing protocols.
Configuring LPD or RAW
1Click [Edit] in [LPD Print Settings]  or [RAW Print Settings].
2Configure the settings as necessary.
1
2
3
4
>ã>Þ>Ì>Û>Ì>Þ>Ý>å
 
						

							[Use LPD Printing]
Select the  check  box to  print using LPD. Clear the  check  box if  you do not  want to  use LPD  printing.
[Use RAW Printing]
Select the  check  box to  print using RAW. Clear the  check  box if  you do not  want to  use RAW printing.
3Click [OK].
Configuring WSD
1Click [Edit] in [WSD Settings].
2Configure the settings as necessary.
[Use WSD Printing]
Select the  check  box to  print using WSD. Clear the  check  box if  you do not  want to  use WSD printing.
[Use WSD Browsing]
Select the  check  box to  obtain information  about  the  machine from a computer  via  WSD. This check  box is  selected
automatically when the  [Use WSD Printing]  check  box is  selected.
[Use Multicast Discovery]
Select the  check  box to  set the  machine to  reply to  multicast discovery messages.  If  the  check  box is  cleared,  the
machine stays  in sleep mode even when it receives a multicast discovery message from the  network.
3Click [OK].
Restart the machine.
Turn  OFF  the  machine, wait  for  at least  10 seconds,  and  turn  it back ON.
Setting up WSD network devices on Windows Vista/7/8
Install the  printer driver  according to  the  procedure using WSD ports described in the  Printer Driver  Installation  Guide.
5
>ã>ß>Ì>Û>Ì>Þ>Ý>å
 
						

							LINKS
Configuring  Printer Ports
>ã>à>Ì>Û>Ì>Þ>Ý>å
 
						

							0HWJ-028
Configuring Printer Ports
Printing  errors  can occur  when the  print protocol settings of the  machine have been changed, or when a printer has been added via  the
Windows  printer folder.  These errors  are  typically caused by incorrect  printer port settings,  for  example  when a computer  specifies an
incorrect  printer port number or type in the  printer driver. To fix this type of problem,  configure the  printer port settings on  the
computer.
To perform  the  following  procedure, log on  to  your computer  with an  administrator account.
Open the printer  folder. Displaying the Printer Folder
Right-click the icon of the machine and  click [Printer  properties] or [Properties].
Click the [Ports] tab and  configure the required settings.
Adding a port
When  an  incorrect  port was  selected while installing a printer driver  from the  Windows  printer folder,  add  a new port. There  are
two types of port: "MFNP Port" and  "Standard TCP/IP  Port."  Select the  port type according to  your environment.MFNP Port
(only  for  IPv4
environment)
This is  a port that  allows  the  IP  address of the  machine to  be detected automatically.  Even if  the  IP
address of the  machine is  changed, the  connection is  maintained, provided that  the  machine and  the
computer  are  in the  same subnet. You  do not  need to  add  a new port every time  the  IP  address is
changed. If  you are  using the  machine in an  IPv4  environment, you should normally select this type of
port.
You  can add  an  MFNP port only when you installed the  printer driver  from the  User Software  CD -ROM/DVD -
ROM, or when you downloaded  and  installed the  printer driver  from the  Canon  website.
Standard TCP/IP
Port This is  a standard Windows  port. When  you use this type of port, you need to  add  a new port every time
that  the  IP  address of the  machine is  changed. Select this type of port when you are  using the  machine in
an  IPv6  environment and  when you cannot  add  an  MFNP port.
Adding an  MFNP port
1
2
3
>ã>á>Ì>Û>Ì>Þ>Ý>å
 
						

							Adding a standard TCP/IP  port
1Click [Add  Port].
2Select [Canon MFNP  Port] in [Available  port types] and  click [New Port].
3Select [Auto  Detect] and  select the machine when it is  detected,  and  then  click [Next].
If the machine is  not  detected
Click [Refresh].  If  the  problem persists,  select [IP  address] or [MAC address], enter the  IP  address or MAC
address of the  machine (
Viewing Network Settings) and  then  click [Next].
4Click [Add] [Finish].
5Click [Close].
1Click [Add  Port].
2Select [Standard TCP/IP Port] in [Available  port types] and  click [New Port].
3Click [Next].
4Enter  the IP address or the DNS  name  of the machine, and  click [Next].
The [Port  Name] is  entered  automatically.  If  necessary, you can change it.
>ã>â>Ì>Û>Ì>Þ>Ý>å
 
						

							Changing the port type or number
If  the  printing protocol (LPD or RAW) has been changed on  the  machine side  (Configuring  Printing Protocols and  Web
Services ) or the  port number has been changed (Changing Port Numbers ), the  corresponding settings on  the  computer  must
also  be configured. This operation is  not  needed for  WSD ports.
MFNP port
Standard TCP/IP  port
When  the  next screen is  displayed,  follow  the  instructions on  the  screen.
When  you  select the [Device Type], select [Canon Network Printing Device with  P9100] under  [Standard].
5Click [Finish].
6Click [Close].
*
1Click [Configure  Port].
2Under  [Protocol Type], select [RAW]  or [LPR], and  change the [Port Number].
3Click [OK].
1Click [Configure  Port].
2Under  [Protocol], select [Raw] or [LPR].
If  you selected [Raw],  change the  [Port  Number].
If  you selected [LPR], enter "lp" in [Queue  Name].
>ã>ã>Ì>Û>Ì>Þ>Ý>å
 
						

							Click [Close].
3Click [OK].
4
>ã>ä>Ì>Û>Ì>Þ>Ý>å
 
						

							0HWJ-029
Configuring the Machine for Your Network Environment
The size and  configuration of a network varies  depending on  the  purpose of the  network. This machine has been designed to  be
compatible  with as many network configurations  as possible,  and  it is  equipped with a variety  of network technologies. Consult your
network administrator and  set a configuration to  suit your network environment.
>ã>å>Ì>Û>Ì>Þ>Ý>å
 
						

							0HWJ-02A
Changing the Maximum Transmission Unit
In most Ethernet networks, the  maximum  size of a packet  that  can be sent is  1500  bytes.  A packet  refers to  a small chunk  of data. The
original  data is  divided into packets  before being sent. The maximum  transmission unit  (MTU)  may  vary on  each network. Change  t he
settings of the  machine as necessary. For more information, contact your network administrator.
Start  the Remote UI  and  log  on in System Manager Mode.  Starting the Remote UI
Click [Settings/Registration].
Click [Network Settings]  [TCP/IP  Settings].
Click [Edit] in [MTU Size Settings].
Select the maximum packet size, and  then click [OK].
Restart the machine.
1
2
3
4
5
6
>ä>Ü>Ì>Û>Ì>Þ>Ý>å