Canon Imageclass D550 User Guide

Quick View- Perform Useful Tasks
Next 
Page
Before Using the MachineP. 1 - 11
Document and Paper HandlingP. 2 - 12
CopyingP. 3 - 13
Printing from a ComputerP. 4 - 14
5
6
7
8
9
Be sure to read the manual before using 
the machine.
Keep the manual for future reference.
Searching the Installation and 
Connection ProcedureSee the Starter Guide.
Using the Scan FunctionsP. 5 - 1
MaintenanceP. 6 - 1
TroubleshootingP. 7 - 1
Registering/
Setting the Various FunctionsP. 8 - 1
AppendixP. 9 - 1
Security Functions...

 
Adjusting the Image Quality According to the DocumentFor details, see Copying from p. 3-1.
You can adjust the density of copies according to the 
document.

Image Quality Adjustment
Enlarged/Reduced CopiesReduced Layout
Copying ID Card
2 on 1
4 on 1
2-Sided Copying
Collating
Density Adjustment
You can adjust the image quality according to the types of 
documents.
A correct selection is necessary for the optimal 
reproduction of the document.
 
Various Copy FunctionsFor details, see Copying from p....

Quick View- Perform Useful Tasks
CopyPrintScan
You can enlarge or reduce standard size documents to copy 
on standard size paper or specify the copy ratio in 
percentage.
You can print on both sides of paper.You can reduce multiple documents to print them onto one 
sheet.
Booklet printing allows you to make a booklet by folding 
printouts in half.
You can magnify and divide a single page image to print it out 
on multiple sheets of paper. You can make one large poster 
by joining these printouts...

 
Saving in a Computer

5IFSF
BSF
UXP
NFUIPET
GPS
TBWJOH
TDBOOFE
EPDVNFOUT
JO
B
DPNQVUFS
Scanning with the MF Toolbox*
Scanning is performed by operating the 
software supplied with the machine.
Scanning from an Application
Scanning is performed using 
your application.
This allows you to open the 
scanned data as is in your 
application.You can easily save scanned documents 
in a computer only by operating the 
operation panel of the machine.
Various scanning settings have been 
prepared for your...

ii
 Contents 
Contents ii
Manuals for the Machine  iv
Available Features  v
How to Use This Manual  v
Important Safety Instructions  vi
Installation Requirements and Handling  x
Legal Notices  xii
Laser Safety  xiv
1.  Before Using the Machine  1-1
Names and Functions on Each Part of the Machine  1-2
Front Side 1-2
Back Side  1-3
Interior 1-3
Multi-purpose Tray  1-4
Paper Cassette  1-4
Operation Panel  1-5
LCD (Standby Mode)  1-6
Copy Mode  1-6
Scan Mode  1-6
Navigating the Menu 1-7
Entering the Menu...

iii
5.  Using the Scan Functions  5-1
Basic Operation Methods for Scanning 5-2
6. Maintenance 6-1
Cleaning the Machine  6-2
Cleaning the Exterior  6-2
Cleaning the Interior  6-2
Cleaning the Fixing Unit  6-3
Cleaning the Platen Glass  6-4
Cleaning the Feeder  6-4
Precautions When Cleaning the Machine  6-4
Replacing Toner Cartridges 6-6
About the Supplied Toner Cartridge  6-6
About Replacement Toner Cartridge  6-6
Handling Toner Cartridge  6-6
Using the Toner Saver Mode  6-7
Before Replacing the Toner...

iv
 Manuals for the Machine 
  
 Starter  Guide 
 e-Manual 
 Basic Operation Guide 
 Read this manual first. 
 This manual describes the settings for 
setting up the machine and installing 
the software. Be sure to read this 
manual before using the machine. 
 Read the desired chapter 
to suit your needs. 
 The e-Manual is categorized by subject 
to find desired information easily. 
 Read this manual next. 
 This manual describes the basic use of 
the machine. 
•  Preface 
•   Installing the Machine 
•...

v
   Available  Features 
 Symbols Used in This Manual  
 WARNINGIndicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To
use the machine safely, always pay attention to these warnings.
 CAUTIONIndicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the
machine safely, always pay attention to these cautions.
 IMPORTANT
Indicates operational requirements and restrictions. Be  sure to read...

vi
   Important  Safety  Instructions 
 Please read these “Important Safety Instructions” thoroughly before operating the machine. 
 As these instructions are intended to prevent injury to the user and other persons or to prevent destruction of property, always pay 
 attention to these instructions and operational requirements. 
 Also, as it may result in unexpected accidents or injuries, do not perform any operation unless otherwise specified in the man ual. 
 Installation  
  WARNING 
•   Do not...

vii
 
-  The power cord is bent near the connection part, and 
continuous stress is being applied to the power outlet or 
the connection part. 
 
-  Applying a shock to the power connector. 
•   Do not use power cords other than the one provided, as  this can result in a fire or electrical shock.  
•   As a general rule, do not use extension cords. Using an  extension cord may result in a fire or electrical shock. 
•   Remove the power plug from the AC power outlet  and refrain from using the machine...