Canon Lv-7265, Lv-7260, Lv-x7 Multimedia Projector Users Manual

32
❽
 After Use
Preparation: Make sure that the projector is turned off.
1.  Unplug the power cord.
2.  Disconnect any other cables.
3.  Retract adjustable tilt feet if extended.
4.  Cover the lens with the lens cap.
5.  Put the projector and its accessories in the supplied soft case.
  Place the projector in the soft case with the lens facing upward as shown below. This is to prevent the lens 
from damage.
NOTE: When placing the projector in the soft case, retract the tilt feet and the rear feet....

33
POWER
BACK INPUT IMAGE
ASPECT
INFO.
MENUNO SHOW
AUTO PC
4. Convenient Features
❶
 Turning off the Image and Sound
Press the NO SHOW button to turn off the image and sound for a 
short period of time. Press again to restore the image and sound.POWER
BACK INPUT IMAGE
ASPECT
INFO.
MENUNO SHOW
AUTO PC
❷
 Freezing a Picture
Press the FREEZE button to freeze a projected moving picture such 
as DVD. Press again to resume motion.
❸
 Enlarging and Moving a Picture
R-
CLICKL-
CLICK
VOL
FREEZEPA G E
D.ZOOM
You...

34
4. Convenient Features
❹
 Using the Remote Mouse Receiver (LV-7265/LV-7260)
The remote mouse receiver enables you to operate your computer’s mouse functions from the remote control. It is 
a great convenience for clicking through your computer-generated presentations.
Connecting the remote mouse receiver to your computer
If you wish to use the remote mouse function, connect the mouse receiver and computer.
The mouse receiver can be connected directly to the computer’s USB port (type A).
NOTE:...

35
4. Convenient Features
Operating your computer’s mouse from the remote control
You can operate your computer's mouse from the remote control.
PAG E  ▲/▼ Button..................scrolls the viewing area of the window or to move to the previous or next slide in 
PowerPoint on your computer.
 / Mouse Buttons ......moves the mouse cursor on your computer.
L-CLICK Button ......................works as the mouse left button.
R-CLICK Button .....................works as the mouse right button.
About Drag...

36
4. Convenient Features
❺
 Preventing the Unauthorized Use of the Projector
A password can be set for your projector to avoid operation by an unauthorized user using the Menu. When a 
password is set, turning on the projector will display the password input screen. Unless the correct password is 
entered, the projector cannot project an image.
To enable the Password function:
1.  Press the MENU button.
  The menu will be displayed.
2.  Use the SELECT 
 or  button to select [Setup] and press the OK or...

37
  The [Confirm password] screen will be displayed.
NOTE: Do not forget your password. If you forget your password, contact your dealer.
7.  Type in the same combination of SELECT button 
  and press the OK button.
  The confirmation screen will be displayed.
8.  Select [Yes] and press the OK button.
  The Password function has been enabled.
To turn on the projector when Password is enabled:
1.  Press the Main Power Switch to the On position (I). 
2.  Press and hold the POWER  button for about 1...

38
4.  Use the SELECT  or  button to select [Password] and press the OK or SELECT  button.
5.  Use the SELECT 
 or  button to select [off] and press the OK button.
  The password confirmation screen will be displayed.
6.  Type in your password and press the OK button.
  When the correct password is entered, the Password function will be disabled.
NOTE: 
•  If you forget your password, contact your dealer.
•  The [Password] setting cannot be cancelled by using the [Reset] of the menu.
4. Convenient Features 

39
❶
 Using the Menus
NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected.
1.  Press the MENU button on the remote control or projector cabinet to display the Menu.
5. Using On-Screen Menu
POWER
BACK INPUT IMAGE
ASPECT
INFO.
MENUNO SHOW
AUTO PC
2.  Press the SELECT  or  button on the remote control or the projector cabinet to highlight the menu 
for the item you want to adjust or set.
POWER
BACK INPUT IMAGE
ASPECT
INFO.
MENUNO SHOW
AUTO PC
3.  Press...

40
5. Using On-Screen Menu
POWER
BACK INPUT IMAGE
ASPECT
INFO.
MENU
NO SHOW
AUTO PC
POWER
BACK INPUT IMAGE
ASPECT
INFO.
MENUNO SHOW
AUTO PC
POWER
BACK INPUT IMAGE
ASPECT
INFO.
MENUNO SHOW
AUTO PC
4. Use the SELECT  or  button on the remote control or the 
projector cabinet to select the item you want to adjust or set.
5.  Adjusting the level of a selected item or selecting an item.
  For Adjusting items (Slide bar)
Slide bar ...............Indicates settings or the direction of adjustment.
• Use the...

41
5. Using On-Screen Menu
❷
 Menu Elements
Highlight
Title
Slide bar
Source
Solid triangle
Radio button
Thermometer symbol
Key symbol
Menu windows or dialog boxes typically have the following elements:
Title .......................................... Indicates the menu title.
Highlight ................................... Indicates the selected menu or item. 
Source ...................................... Indicates the currently selected source.
Remaining countdown time ..... Indicates the remaining...