Home > Canon > Camera > Canon network camera VBH630D User Manual

Canon network camera VBH630D User Manual

Here you can view all the pages of manual Canon network camera VBH630D User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.

Page 31

Detecting/Setting Cameras
2
31
Note
 If a connection to the NTP server cannot be established because, for example, the IP address of the NTP server is incorrect, the 
date and time are not changed.
 The NTP server query interval is 300 seconds. If the time of camera and that of NTP server are substantially different, it tak es time 
to complete synchronization.
(4) [NTP Server]
If you select [Auto-Setting of NTP Se rver] > [Disable], enter the IP address or host name of the NTP server.
(5) [Time zone]...

Page 32

32
Video
(1) [Video Size Set]
Set the set of video sizes  to use with the camera.
(2) [H.264(2)] Select [Disable] to transmit only one stream of H.264 video.
Select [Enable] to transmit two streams of H.264 video.
(3) [H.264(1)]/[H.264(2)] Configure on each tab the settings for the H.264(1) and H.26 4(2) video to be transmitted from the camera to the 
Viewer.
(4) [Video Size] Select the size for video  transmitted from the camera.
(5) [Bit Rate Control] Set the bit rate for video.
When [Use bit rate...

Page 33

Detecting/Setting Cameras
2
33
You can use this tool to display the camera’s Setting Page or start Viewer. You can also check the operation and advanced 
settings of cameras whose basic  settings have been configured.
Depending on the computer environment,  you may need to add the camera’s IP address as a trusted site in order to launch 
the Setting Page and Viewer. This tool ca n be used for the registration process.
Note
Regardless of which browser is set as the standard browser, Inte rnet Explorer is...

Page 34

34
Note
The settings configured on the Setting Page are saved to only the camera and are not reflected in this tool. After configuring the 
settings, select the camera in the camera list  of this tool and then click   (Update Camera Information) on the toolbar to updat e 
the settings in this tool.
Launching Viewer
You can launch Viewer to check the video of a camera for whi ch the basic settings and the settings of [Setting Page] are 
finished.
Perform this operation by selectin g and setting one camera...

Page 35

Detecting/Setting Cameras
2
35
You can access Camera Angle Setting Tool and admin tools from this tool.
This operation can only be done with one camera at a time.
Note
The tools in the [Tools] menu that are not supported by the selected camera will appear grayed out. The tools may be included in a Setting 
Page or as software that must be installed to the computer, de pending on the camera model. If they are included in a Setting Pa ge, the 
corresponding Setting Page is displayed after entering the admi...

Page 36

36
Important
To ensure security, exit Internet Explorer after completing the settings with Admin Tools. 

Page 37

Chapter
 
Camera Specification File Use
The information displayed in the camera list of this tool can be saved and edited as a camera specification file. 
You can load camera specification files when the tool is launched, and use them to manage more than 64 
cameras. 

Page 38

38
The content of the camera list can be saved as a camera specification file in the CSV format. Saved camera specification 
files can be configured to be loaded  automatically upon next startup, or edited to be used for setting the camera.
Saving When Exiting the Tool
You can save a camera specification file when exiting th is tool. You can also specify whether to load the camera 
specification file the next  time the tool launches.
Note
If the [Enable camera specification file] checkbox is selected in...

Page 39

Camera Specification File Use
3
39
Saving Using the Menu
Camera specification files can be saved using the following procedures while the tool is running.
The [Export Camera List] dialog box appears.
To include the administrator password when saving t he camera specification file, select [Save password.].
To also encrypt the administrator pa ssword when saving the camera spec ification file, select the [Encrypt 
password.] checkbox.
Note
If you select the [Save password.] checkbox, the administrator pass...

Page 40

40
Camera specification files saved in CSV can be edited with a spreadsheet software such as Excel, or a text editor such as 
Notepad.
Camera Specification File Configuration
First line (header)
It is described as follows.
The “ContainsPass” value changes as follows depending on the  settings of the [Export Camera List] dialog box at the 
time of saving.
Described only when the “ContainsPass” value for t he [Common Authentication Administrator name = Common 
Authentication Administrator Password] is “1”...
Start reading Canon network camera VBH630D User Manual

Related Manuals for Canon network camera VBH630D User Manual

All Canon manuals