Canon network camera VBM720F User Manual

							ENGLISH
Network Camera
Network Camera
Operation Guide
Be sure to read this User Manual before using the network camera. 
						

							2
Thank you for purchasing a Canon Network Camera (hereafter referred to as the camera)*. 
This “Operation Guide” explains the camera settings and operations. Read this guide carefully before using the camera to 
ensure correct use. Also, be sure to read the files in the LICENSE folder on the Setup CD-ROM.
For the latest information on this product (firmware and included software, user manuals, operating environment, etc.), 
please refer to the Canon Web Site.
* The cameras described in this manual may include models not be sold in your country and region.
For the latest information on this product (firmware and included software, user manuals, operating environment, etc.), 
please refer to the Canon Web Site.
Disclaimer
To the full extent permitted by laws and regulations, neither 
Canon Inc. nor any of its subsidiaries or affiliates shall be 
responsible for any financial losses that may be incurred as 
a result of the loss of recorded information or images, 
regardless of the internal or external cause of the loss.
EXCEPT AS SET FORTH IN THE LIMITED WARRANTY 
ACCOMPANYING THE CAMERA AND WITHOUT 
DETRACTING FROM ANY RIGHTS A CONSUMER MAY BE 
ENTITLED TO, AND TO THE FULL EXTENT PERMITTED BY 
LAWS AND REGULATIONS: (1) NEITHER CANON INC. NOR 
ANY OF ITS SUBSIDIARIES OR AFFILIATES MAKE ANY 
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH 
REGARD TO THE MATERIAL IN THIS MANUAL OR WITH 
REGARD TO THE USE OF THE CAMERA INCLUDING, 
WITHOUT LIMITATION, IMPLIED WARRANTIES AS TO 
MARKETABILITY, MERCHANTABILITY, FITNESS FOR A 
PARTICULAR PURPOSE OR USE, OR NON-INFRINGEMENT 
AND (2) NEITHER CANON INC. NOR ANY OF ITS 
SUBSIDIARIES OR AFFILIATES SHALL BE LIABLE FOR ANY 
DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES 
OF ANY NATURE RESULTING FROM THE USE OF THIS 
MATERIAL OR THE CAMERA.
„Notes
1 All rights reserved. 
2 The contents of this guide are subject to change 
without any prior notice. 
3 This document has been prepared with the utmost 
attention to accuracy. If you have any comments, 
however, please contact a Canon sales representative. 
4 Canon shall assume no liability for any outcome of 
using this product, regardless of Items 2 and 3 above. 
Notes on Network Security
The user is responsible for the network security of this 
product and its use.Take appropriate network security measures to avoid 
security breaches.
To the full extent permitted by laws and regulations, 
neither Canon Inc. nor any of its subsidiaries or affiliates 
shall be liable for any losses, direct, incidental or 
consequential damages, or liabilities that may be incurred 
as a result of network security incidents such as 
unauthorized accesses.

– Change the password of the camera periodically.
– Change the HTTP or HTTPS port number of the 
camera.
– Limit access to the camera by network devices.
For additional network security recommendations, please 
refer to the Canon web site.
Copyright
Videos, images or sounds recorded with your camera 
may not be utilized or published without consent of 
copyright holders, if any, except in such a way as 
permitted for personal use under the relevant copyright 
law. 
Notes on Privacy and Publicity Rights 
Regarding the Use of Video/Audio
When using the camera (for video or audio recording), it is 
the full responsibility of the user to protect privacy and 
avoid any violation of publicity rights. For example, obtain 
consent to install the camera in advance if specific 
buildings or rooms are to be monitored. Canon shall have 
no liability whatsoever in this regard.
Legal Notice
In some cases, camera monitoring may be prohibited by 
law or regulation, the details of which differ by country. 
Before using the camera, check the laws or regulations of 
the country or region where the camera is used. 
Introduction 
						

							Introduction
3
Trademark Notice
 Canon and the Canon logo are registered trademarks 
of Canon Inc. 
Microsoft, Windows, Windows Vista, Internet Explorer, 
Windows 
Server, Windows Media and ActiveX are 
trademarks or registered trademarks of Microsoft 
Corporation in the United States and other countries.
 Windows is legally recognized as the Microsoft Windows 
Operating System. 
 This product comes with exFAT, a licensed file system 
technology from Microsoft.
 QuickTime is a trademark of Apple Inc.
 SD, SDHC and SDXC Logos are trademarks of SD-3C, 
LLC.
 Other brands or product names in this guide are 
trademarks or registered trademarks of their respective 
companies. 
Notes on the Included Software RM-Lite 
( Disclaimer ) 
Flaws or other problems with RM-Lite may result in recording 
failure or destruction or loss of recorded data. Canon shall 
have no liability whatsoever for any loss or damages 
incurred by the user as a result of such problems.
Notes on License Agreement for Included 
Software
For information on the License Agreement for Included 
Software, refer to the next file in the BundledSoftware 
folder in the Included Setup CD-ROM LICENSE folder.
Only for European Union and EEA (Norway, 
Iceland and Liechtenstein)
These symbols indicate that this 
product is not to be disposed of with 
your household waste, according to 
the WEEE Directive (2012/19/EU), 
the Battery Directive (2006/66/EC) 
and/or national legislation 
implementing those Directives. 
If a chemical symbol is printed beneath the symbol shown 
above, in accordance with the Battery Directive, this indicates 
that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = 
Lead) is present in this battery or accumulator at a 
concentration above an applicable threshold specified in the 
Battery Directive.
This product should be handed over to a designated 
collection point, e.g., on an authorized one-for-one basis when 
you buy a new similar product or to an authorized collection 
site for recycling waste electrical and electronic equipment 
(EEE) and batteries and accumulators. Improper handling of 
this type of waste could have a possible impact on the 
environment and human health due to potentially hazardous 
substances that are generally associated with EEE. Your 
cooperation in the correct disposal of this product will 
contribute to the effective usage of natural resources. 
For more information about the recycling of this product, 
please contact your local city office, waste authority, 
approved scheme or your household waste disposal 
service or visit ww
w.canon-europe.com/weee, or 
www.canon-europe.com/battery
.
This product is licensed under AT&T patents for the MPEG-4 
standard and may be used for encoding MPEG-4 compliant 
video and/or decoding MPEG-4 compliant video that was 
encoded only (1) for a personal and non-commercial 
purpose or (2) by a video provider licensed under the AT&T 
patents to provide MPEG-4 compliant video. No license is 
granted or implied for any other use for MPEG-4 standard.
 Warning 
To reduce a risk of fire or electric shock, do not expose 
this product to rain or moisture.
(VB-H43, VB-H630D, VB-H730F, VB-M42, VB-M620D, 
VB-M720F)
Software TypeFile Name
Camera Management Tool
VBTools-E.txt Camera Angle Setting Tool
(Not used with the VB-H43/VB-
M42.)
RM-Lite Network Video Recording 
SoftwareRM-Lite-E.txt 
						

							4
Open Source Software
The product (camera and included RM-Lite) contains Open 
Source Software modules. For details, please refer to 
“ThirdPartySoftware-E.pdf” (Third-Party Software License) in 
the Open-SourceSoftware folder in the LICENSE folder on 
the Setup CD-ROM. Each modules license conditions are 
also available in the same folder. 
Software under GPL and LGPL
If you would like to obtain the source code under GPL/
LGPL, please contact us at [email protected]
 and 
provide the following information in English or Japanese:
1. Product name and firmware version.
2. Name of the software module or modules you would 
like to obtain.
You can obtain the source code for at least three years 
from the day you purchased this product. Please note we 
may bill you for any costs we incur in providing you the 
source code.
Security Export Control
This product is subject to security export control. 
Therefore, to export or carry it overseas may require an 
authorization by governmental agencies. 
						

							5
User Manuals
The following describes the different camera user 
manuals.
In the Setup CD-ROM, the recording software RM-Lite 
(“RM-Lite” in “Chapter1 Before Use”) is also included. The 
following user manuals are available. 
How to Use This Operation Guide
The assumed reading format of this user manual is on a 
PC screen.
Software Screenshots
The software screenshots shown in these user manuals 
are illustrative samples only. The screenshots may differ 
from the actual screens displayed. 
Screenshots used with the explanations are generally 
from a Windows 7 PC connected to the VB-H43.
Descriptions in this document use [1920 x 1080 / 960 x 
540 / 480 x 270] for the video size set. If using a different 
video size set, substitute those sizes when reading this 
manual.
Icons Indicating Particular Camera 
Models
In the descriptions of functions limited to particular 
models, the model names will appear or the following 
icons will be used to indicate those models.
Symbols Indicating Safety Precautions
This section explains symbols used in this “Operation 
Guide”. This “Operation Guide” uses the following 
symbols to indicate important information the user should 
know in order to use the product safely. Be sure to 
observe these items. 
How to Read This Operation Guide
Installation Guide (Included)
This guide provides notes and procedures on camera 
installation as well as the main camera specifications. 
Sections you should reference in this guide will be 
marked “Installation Guide” along with the name of the 
reference items.
Operation Guide (This Document)
This document explains the initial camera settings, 
Camera Angle Setting Tool, Admin Tools settings, viewer 
operations and troubleshooting, etc. This document is 
included in the Setup CD-ROM. 
“Camera Management Tool User Manual”
This explains details on using the Camera Management 
Tool. It is included in the Setup CD-ROM.
Network Video Recording Software RM-Lite 
Administrator Manual
This document gives a detailed explanation of how to 
use RM-Lite.
IconCamera Model
VB-H43
VB-H630VE and VB-H630D
VB-H730F
VB-M42
VB-M620VE and VB-M620D
VB-M720F
SymbolMeaning
WarningFailure to follow the instructions 
accompanied by this symbol may result 
in death or serious injury. Be sure to 
observe these warnings to ensure 
safety. 
CautionFailure to follow the instructions 
accompanied by this symbol may result 
in injury. Be sure to observe these 
precautions to ensure safety. 
CautionFailure to follow the instructions 
accompanied by this symbol may result 
in property damage. Be sure to observe 
these precautions. 
 ImportantThis symbol indicates other actions or 
information that should be noted. 
Important notes and restrictions are 
provided. Be sure to read this section. 
 NoteContains operational reference 
information or additional explanations. 
						

							6
The following items must be observed when using the camera.
If they are not observed, injury, death and/or property damage may occur. Read the following information carefully and 
observe the instructions without fail.
Important Warnings
Safety Precautions
Caution
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 
NOT REMOVE COVER (OR BACK). 
NO USER-SERVICEABLE PARTS INSIDE. REFER 
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The AC adapter (sold separately) can be connected to 
the camera from a standard AC power outlet.
Please check your instruction manual to make sure that 
your camera is compatible with this adapter.
• The socket-outlet should be installed near the 
equipment and should be easily accessible.
 Unplug the equipment from the wall outlet before 
cleaning or maintaining.
FDA regulation
This Network Camera has not been evaluated by the 
Food and Drug Administration (FDA) for use as a 
medical device. When incorporated into a system with 
medical applications, FDA regulations may apply. 
Therefore, please consult your legal advisor to 
determine whether FDA regulations apply.
FCC NOTICE
Network Camera, Model Name: VB-H43/VB-H630VE/
VB-H630D/VB-H730F/VB-M42/VB-M620VE/VB-M620D/
VB-M720F
This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions: (1) 
This device may not cause harmful interference, and (2) 
this device must accept any interference received, 
including interference that may cause undesired 
operation.
Note: This equipment has been tested and found to 
comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against 
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications.
However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does 
cause harmful interference to radio or television 
reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following 
measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and 
receiver.
 Connect the equipment to an outlet on a circuit 
different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV 
technician for help.
Do not make any changes or modifications to the 
equipment unless otherwise specified in the manual. If 
such changes or modifications should be made, you 
could be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Park, Melville, New York 11747, U.S.A.
Tel No. 1-800-OK-CANON (1-800-652-2666) 
						

							Safety Precautions
7
Precautions for Use Precautions for Use of the Camera Angle Setting Tool
Precautions for Use of Built-In Camera Functions and 
Included Software
Notes on Cleaning
 Warning 
 If you discover defective conditions such as smoke, 
strange sounds, heat or strange odors, immediately 
stop using the camera and contact your nearest 
dealer. 
Continued use of the product may cause fire or electric 
shock. 
 If thunder starts, stop installation or inspection etc. 
and do not touch the camera or continue connecting 
the cable.
 Do not disassemble or modify the camera.
 Do not spill water or other liquid inside the camera, 
spray the camera with water, or otherwise make it wet.
 Do not insert foreign objects into the camera. 
 Do not use flammable sprays near the camera. 
 Do not leave LAN cables, external power supplies or 
AC adapter (sold separately) power connectors 
connected when the camera is not in use for long 
periods. 
 Do not damage the connecting cable. 
This may cause fire or electric shock. 
 Do not use with medical devices or other life-support 
systems. 
Depending on the PC and network environment, high-
precision video transmission cannot be guaranteed due 
to video delay or loss. 
Canon will assume no liability for any accident or 
damage resulting from use of the camera in the 
aforementioned devices or systems.
Caution
 Do not capture the sun, halogen lamps, and other very 
bright light sources or subjects. 
 Do not expose the camera to strong impact or 
vibration.
 Do not carry the network camera by the 
camera head.
 Do not forcibly turn the 
rotating parts of the camera by hand.
This may cause malfunction. 
This installation should be made by a qualified service 
person and should conform to all local codes.
Caution
 The Camera Angle Setting Tool is intended for use 
during camera installation. Do not use on a daily 
basis.
This may cause malfunction.
Caution
 Do not use the built-in camera functions or included 
software listed below in cases requiring a high level of 
reliability:
– Intelligent functions
– Image Stabilizer
– Network video recording software RM-Lite
These features do not guarantee high-precision capture 
and cannot support applications beyond their intended 
range of use. Canon will assume no liability for any 
accident or damage resulting from the use of these 
functions.
 Warning 
 Do not use alcohol, thinner, benzine or any other 
flammable solvent. 
This may cause fire or electric shock. 
 Caution
 Periodically check the parts and screws for rust and 
loosening.
For inspections, please contact the dealer where you 
purchased the product.
Failure to comply could result in injuries and equipment 
damage due to falling items. 
						

							8
Maintenance
Turn off the power before cleaning the camera. 
„Cleaning of Exterior
1 Dampen a soft cloth with water or diluted neutral 
detergent and wipe away the grime gently. 
2 Wipe with a dry cloth. 
„Cleaning of Lens
Use a commercial lens cleaner to remove grime on the 
lens surface. 
 Auto focus may not work properly if the 
lens surface is dusty or dirty.
 Be aware that scratches on the lens surface may result 
in poor image capture. 
„Cleaning of Front Cover, Dome Case, or 
Dome Housing
Grime on any of the parts listed below will reduce image 
quality, so periodic cleaning is required.
Dome (when using the separately sold 
indoor dome housing)
Dome case
Front cover
If the surface of the above part cannot be cleaned well, 
remove it following the steps below to clean it more 
thoroughly.
1 Remove the front cover, dome case, or dome.
See steps in “Installing the Camera” in the “Installation 
Guide” included with the indoor dome housing and 
remove the dome.
See steps in “Installing the Camera” in the “Installation 
Guide” included with the camera to remove the dome 
case.
See “Using Camera Housing” in the “Installation Guide” 
included with the camera to remove the front cover.
2 Dampen a soft cloth with water or diluted neutral 
detergent and wipe away the grime gently. 
3 Wipe with a dry cloth. 
4 Reattach the front cover, dome case or dome to its 
original position.
Disposing of the Camera
Dispose of the camera in accordance with local laws and 
regulations. 
When disposing of the camera, do not forget to remove 
the memory card. 
						

							9
Table of Contents
Introduction .................................................................................................................. 2
Disclaimer ............................................................................................................................... 2
Notes on Network Security ......................................................................................................2
Copyright................................................................................................................................. 2
Notes on Privacy and Publicity Rights Regarding the Use of Video/Audio ............................ 2
Trademark Notice.................................................................................................................... 3
Notes on the Included Software RM-Lite ( Disclaimer ) ........................................................... 3
Notes on License Agreement for Included Software .............................................................. 3
Only for European Union and EEA (Norway, Iceland and Liechtenstein)............................... 3
Open Source Software ............................................................................................................4
Security Export Control ........................................................................................................... 4
How to Read This Operation Guide ............................................................................. 5
User Manuals .......................................................................................................................... 5
How to Use This Operation Guide .......................................................................................... 5
Icons Indicating Particular Camera Models ............................................................................ 5
Symbols Indicating Safety Precautions................................................................................... 5
Safety Precautions....................................................................................................... 6
Maintenance............................................................................................................................ 8
Disposing of the Camera ........................................................................................................8
Chapter 1 Before Use
Features..................................................................................................................... 14
Common Features .................................................................................................................14
Camera Software ....................................................................................................... 15
Installed Software .................................................................................................................. 15
Included Software ................................................................................................................. 15
Additional License (Sold Separately) .................................................................................... 15
Network Video Recording Software (Sold Separately) ......................................................... 15
RM-Lite (Please refer to the “Administrator Manual”) ........................................................... 17
Operating Environment .............................................................................................. 18
Camera Angle Setting Tool, Admin Viewer/VB Viewer, Admin Tools.................................... 18
Notes on Operating Environment .............................................................................. 19
Notes on Use When the [Windows Firewall] Function is Enabled ........................................ 19
Notes on Use with Internet Explorer 9 or Greater and Windows Server 2008/
Windows Server 2012 ....................................................................................................... 19
Notes on Use with Windows Server 2008/Windows Server 2012 ......................................... 20
Chapter 2 Initial Settings
Preparing the Camera for Use ................................................................................... 24
Installing the Necessary Software ............................................................................. 26
Making Initial Camera Settings .................................................................................. 28
Launch the Camera Management Tool................................................................................. 28 
						

							10
Searching for Cameras and Setting up Networks................................................................. 28
Set the Password, Date and Time, Camera Name and Video .............................................. 29
Registering Camera’s IP Address to Trusted Sites ............................................................... 30
Access the Top Page of the Camera to Check Video ............................................... 31
Access the Top Page from Camera Management Tool ........................................................ 31
Top Page ............................................................................................................................... 31
Checking Camera Video ....................................................................................................... 32
Chapter 3 Camera Angle Setting Tool      
Setting the Camera Angle.......................................................................................... 36
Launching the Camera Angle Setting Tool ........................................................................... 36
Connecting to the Camera .................................................................................................... 36
Connecting with a Camera List ............................................................................................. 37
Disconnecting from the Camera, Shutting Down .................................................................. 39
Display Screen of Camera Angle Setting Tool ...................................................................... 40
Setting the Camera Angle ..................................................................................................... 41
Setting Focus and Exposure Compensation......................................................................... 42
Creating a Camera Specification File ........................................................................ 43
Chapter 4 Setting Page
Setting Menu.............................................................................................................. 46
Accessing the Setting Menu ...................................................................................... 48
Setting Menu ......................................................................................................................... 48
Items Common to All Setting Pages...................................................................................... 48
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc ................... 50
[Date and Time] Setting Date and Time .................................................................... 54
[Camera] Setting Initial Camera Settings and External Device Name ....................... 56
[Video] Setting Video Size, Quality and Frame Rate ................................................. 61
[RTP] Setting RTP Server, Audio Multicast and RTP Streaming............................... 64
[Upload] Setting HTTP/FTP Upload and E-mail Notification...................................... 66
[Server] Setting the Video Server, Audio Server, HTTP Server, FTP Server and 
WS-Security ......................................................................................................... 69
[Event] Setting Video Record, Volume Detection, External Device Output/Input, 
Audio Playback and Timer ................................................................................... 71
[Access Control] Setting User Access Privileges....................................................... 75
[IPsec] Setting IPsec.................................................................................................. 77
[SSL/TLS] Setting HTTP Communication Encryption ................................................ 80
[802.1X] Network Port Authentication Settings .......................................................... 82
[Memory Card] Memory Card Operations and Settings............................................. 84
[Reboot Item] Setting Items Requiring Rebooting ..................................................... 87
[Maintenance] Viewing Current Settings, Event Logs and Performing 
Maintenance......................................................................................................... 88