Canon network camera VBS905F User Manual

Panorama Creation Tool
91
4
Admin Tools
- Users not connected via RTP
 When a small value is entered for [Maximum Frame Rate: 
Video Transmission] under [Video] > [JPEG] in the Setting 
page, panorama capture is slowed down. 
Saving/Deleting a Panorama Image on the 
Camera
After creating the panorama image, it is sent to and saved 
on the camera to update the cameras panorama image.
How to Save
Click [Save to camera], and then click [OK] in the 
displayed dialog box.
The panorama image is saved to the...

92
View Restriction Setting Tool is a tool that limits the range that can be captured by the camera. If view restrictions have been 
set, you can limit the displayable capture range using the viewer. 
[Apply View Restriction Setting] 
Restrictions set by the View Restriction Setting Tool are applied in the following cases.
 When the Admin Viewer is accessed with authorized user authorities
 When the VB Viewer is accessed
 When accessed via the Intelligent Function Setting Tool
 When accessed via RM-Lite...

View Restriction Setting Tool
93
4
Admin Tools
Display Screens of View Restriction Setting Tool
(1) Video Display Area
The video currently captured by the camera is shown. 
Pan, tilt, and zoom operations are the same as in the 
Admin Viewer. For details, see “How to Operate the 
Viewer” (p. 129).
(2) [Switch Mouse Operation] button
Click the button to switch to . In this mode, move 
the mouse pointer to the video display area and click 
to operate the pan and tilt. Click the button again to 
return to ....

94
(10)[Display in panorama screen] 
Apply the current view restriction settings to the 
panorama screen. At this point, the settings are not 
yet saved in the camera. Be sure to click [Save 
settings]. 
(11)[Restore settings] 
Clear the settings you have specified on the screen of 
the tool and restore the settings saved in the camera. 
(12)[Save settings] 
Save the set view restriction in the camera. 
After the view restriction has been set, be sure to save 
the settings in the camera by clicking [Save...

View Restriction Setting Tool
95
4
Admin Tools
 The pan and tilt ranges vary depending on the zoom ratio 
(view angle). 
 If the view restriction will be exceeded as a result of controlling 
the zoom toward maximum wide-angle, the camera will first 
pan and tilt to a position where the maximum wide-angle zoom 
will be within the viewing restriction area. Wide-angle zoom 
control will then be enabled within the view restriction area.
 Reducing the view restriction may also reduce the zoom range. 
Pan...

96
A tool that lets you set presets and the home position. You can set up to 64 presets (VB-S30D/VB-S31D) and the home 
position while viewing the preview in the panorama or full video mode. 
Preset Setting Tool
Preset Setting Tool
Important
 If you want to use intelligent functions, it is strongly recommended that you use the 
Preset Setting Tool to register a preset that corresponds to the camera position of the 
area where you want to use intelligent functions.
 The camera angle will be as follows...

Preset Setting Tool
97
4
Admin Tools
Display Screens of Preset Setting Tool
(1) Video Display Area
The video currently captured by the camera is shown. 
Pan, tilt, and zoom operations are the same as in the 
Admin Viewer. For details, see “How to Operate the 
Viewer” (p. 129).
(2) [Switch Mouse Operation] button
Click the button to switch to . In this mode, move 
the mouse pointer to the video display area and click 
to operate the pan and tilt. Click the button again to 
return to .
(3) [Switch Screen...

98
 [Focus Mode] 
Select [Auto], [Manual], or [Fixed at infinity] for 
the focus mode of the camera. (p. 142) 
 [White Balance]
Set the white balance of the camera to [Auto] 
or according to the light source of the 
condition in which it is used. For details on 
light sources, see p. 47. 
 [R Gain], [B Gain]
If white balance is set to [Manual], set the 
respective gains to a value between 0 and 
1023.
(11)[Get camera info] 
  
Load the current camera angle and other settings of 
the image display area to...

Preset Setting Tool
99
4
Admin Tools
If you click on the panorama screen, the preview 
frame will move to center on the clicked point.
The settings are reflected in the video display area.
If you previewed incorrect settings, etc., and want to 
restore the settings registered in the camera, click 
[Restore settings].
„Using the Digital PTZ Function to Set Presets
Use the Digital PTZ function to set part of the area that can 
be captured by the camera as a preset.
Be sure to enter the preset name.If you...

100
„Specifying Detailed Settings 
If you want to fine-tune the camera angle or to adjust the 
video, etc., click [Detailed Settings] and specify the 
detailed settings before saving the preset settings in the 
camera.
The camera parameters in the video display area are 
loaded to [Detailed Settings].
The settings are reflected in the preview frame on the 
panorama screen and the video display area. 
If you previewed incorrect settings, etc., and want to 
restore the settings registered in the camera,...