Canon printer FAXPHONE L75 User Manual

Chapter 2 Setting Up2-7
Setting Up
Attaching the Handset to Your Machine
Follow this procedure to attach the handset to your machine:
1Remove the screws 
from the plugs and 
insert the plugs into 
the holes on the 
handset cradle.
3Use your finger to push 
the screws into the 
plugs.
• If you have difficulty, 
use a cross-point 
screwdriver to 
push 
the screws all the way 
into the plugs. (Do not 
screw them in as the 
screws may break.)
• Make sure you 
support the machine 
when inserting the 
screws....

2-8Setting Up Chapter 2
Making Connections
Connecting the Telephone Line Cord and 
External Devices
Your machine has three jacks on the side for connection of the following:
•Telephone line cord
•Handset
•Extension telephone, answering machine, or data modem
Be sure to connect any external device before using your machine. Follow this
procedure to connect the telephone line cord and external device(s):
n
•Canon cannot guarantee that all answering machines will be compatible with your
machine, due to...

Chapter 2 Setting Up2-9
Setting Up
Connecting the Power Cord
Before connecting the power cord, see Power Supply, p. 1-9.
Follow this procedure to connect the power cord:
n
•The machine is equipped with a three-prong, grounding-type plug provided with a third
(grounding) pin. This plug will only fit into a grounding-type outlet. This is a safety feature.
If you are unable to insert the plug into your outlet, contact an electrician to replace the
outlet. Do not defeat the safety purpose of the...

2-10Setting Up Chapter 2
Connecting the FAXPHONE to Your PC
To connect your machine to a PC, you will need to purchase a USB cable suitable for
the interface connector on your PC:
• A USB cable no longer than 16.4 feet (5 meters)
Follow this procedure to connect the appropriate cable:
n
Make sure your PC is running Microsoft Windows®98/Me or Windows®2000/XP,
preinstalled by a computer manufacturer on purchase. (The USB port operation also needs
to be assured by the manufacturer.)
Remove the USB label.To...

Chapter 2 Setting Up2-11
Setting Up
Main Components of the FAXPHONE
SUPPORT TRAYSMULTI-PURPOSE TRAY COVER
ADF (AUTOMATIC 
DOCUMENT FEEDER) DOCUMENT GUIDES
OPERATION PANEL
PAPER DELIVERY 
SELECTOR
DOCUMENT SUPPORT FACE-UP DELIVERY SLOTFRONT COVER FACE-DOWN DELIVERY 
SLOT
LATCH PAPER GUIDESMULTI-PURPOSE TRAY
FX3 CARTRIDGE 
COMPARTMENT
TRANSFER CHARGING 
ROLLER 
(DO NOT TOUCH)
PAPER RELEASE 
LEVER
FIXING ASSEMBLY
FRONT COVER 

2-12Setting Up Chapter 2
Operation Panel
Alarm
GHI JKL MNOABC DEF
TUV WXY
SYMBOLS OPER
Tone PRS
StopHook
Coded Dial Pause Receive Mode
Redial
Start/Copy
Image QualitySet
01 02 03
04
05 06 07
08
09 10 11
12
13 14 15
16
17 18 19
201
0# 7
89 45
6 23
21 22 23
24
RegistrationTransmissionDataDelayedReferenceMemoryPolling
Report
+Space
Clear
•Numeric Buttons •One-Touch Speed Dialing 
Buttons 
•LCD   
•Image Quality Button   
•Coded Dial Button   
•Start/Copy Button  
•Receive Mode Button  
•Pause Button  
•Hook...

Chapter 2 Setting Up2-13
Setting Up
Installing the cartridge
This section describes how to install the cartridge in the machine for the very first time.
If you are replacing a used cartridge, see p. 12-6.
Before installing the cartridge, be sure to read the following:
•Use only FX3 cartridges in your machine.
•Keep the cartridge away from computer screens, disk drives, and floppy disks. The
magnet inside the cartridge may harm these items.
•Do not store the cartridge in direct sunlight.
•Avoid locations...

2-14Setting Up Chapter 2 Follow this procedure to install the cartridge in the machine:
1Make sure the machine is plugged in.
2Lift the latch and open the front cover.
c
Do not try to open the front cover 
without lifting the latch since this
may damage your machine.
3Remove the new FX3 cartridge from
its protective bag.
•Save the protective bag in case you
need to repack the cartridge at a later
date.
4Gently rock the cartridge from 
side to side a few times to distribute
the toner evenly inside it....

Chapter 2 Setting Up2-15
Setting Up
5Place and support the cartridge 
on a flat, clean surface, then gently
pull on the plastic tab to remove the
plastic seal.
•Use a firm, even pull to avoid breaking
the seal.
6Hold the cartridge by its handle 
and insert it into the machine as far as
it will go, making sure that its tabs are
aligned with the rails inside the
machine.
•Always hold the cartridge by its handle.
7Use both hands to close the front 
cover.
TOP VIEW
SIDE VIEW
PULL WITHIN
THIS RANGE
PULL...

2-16Setting Up Chapter 2
Loading Paper
This section explains how to load plain paper in the multi-purpose tray.
For complete details on paper and other print media for use with your machine, see
Chapter 5.
Before loading paper, be sure to read the following:
c
The laser printing process uses high temperatures to fuse toner to the paper. Use
paper that will not melt, vaporize, discolor, or emit dangerous fumes at temperatures
near 338°F (170°C). For example, do not use vellum paper in a laser printer....