Canon printer imageCLASS MF247dw User Manual

2Spreadthedocumentguidesapart.
	Slide the document guides outward until they are slightly farther apart than the actual document width.
3Fanthedocumentstackandaligntheedges.
	Fan the document stack in small batches, and align the edges by lightly tapping the stack on a  5at surface a
few times.
4Placethedocument(s)faceupinthefeeder.
	 Make sure that the document stack does not exceed the load limit guide ().
	 Do not load documents of various sizes at the same time.
	 Up  to  50...

	The machine is ready to scan the document.
Alignthedocumentguidessecurelyagainsttheedgesofthedocument
Document guides that are too loose or too tight can cause misfeeds or paper jam.
Whiledocumentsarebeingscanned
Do not add or remove documents.
Whenscanningiscomplete
Remove the scanned documents from beneath the feeder to prevent paper jams.
Basic Operations
44 

LoadingPaper
1469-00S
You can load the paper into the paper drawer or manual feed slot. Load the paper you usually use into the paper drawer. The paper drawer is convenient when using large amounts of paper. Use the manual feed slot when you
temporarily use size or type of paper that is not loaded in the paper drawer. See 
Paper(P.650) for available paper
sizes.
PaperTypeandSettingfortheMachine
See the table below to specify the paper settings according to the type and weight of the paper to...

	Very thin paper
	 Paper printed by a thermal transfer printer
	 Highly textured paper
	 Glossy paper
Paperhandlingandstorage 	 Store the paper on a  5at surface.
	 Keep the paper wrapped in its original package to protect the paper from moisture or dryness.
	 Do not store the paper in such a way that may cause it to curl or fold.
	 Do not store the paper vertically or stack too much paper.
	 Do not store the paper in direct sunlight, or in a place subject to high humidity, dryness, or...

LoadingPaperinthePaperDrawer
1469-00U
Load the paper that you usually use in the paper drawer. When you want to print on paper that is not loaded in the paper drawer, load the paper in the manual feed slot.  
LoadingPaperintheManualFeedSlot(P.50)
Makesuretoloadpaperinportraitorientation
Paper cannot be loaded in landscape orientation. Make sure to load the paper in portrait orientation. 
1Liftthedustcover.2Slidethepaperguidesapart.
Sizeabbreviationsonthepaperguides
The...

	EXEC: Executive
3Insertthepaperintothepaperdraweruntilthepaperstops.
	Load the paper in portrait orientation (with the short edge toward the machine), with the print side face up.
Paper cannot be loaded in landscape orientation.
	 Fan the paper stack well, and tap it on a  5at surface to align the edges.
	 When you insert the paper with  set to , a  con4rmation screen is
displayed. 
NotifytoCheckPaperSettings(P.487)
Donotexceedtheloadlimitguidewhenloadingpaper
Make sure...

5Lowerthedustcover.
WhenLegalsizepaperisloaded
The paper guides at the rear edge of the paper will be extended. Open the dust cover extension, then lower the dust cover.
6Pulloutthepaperstoppertoopen.}ContinuetoSpecifyingPaperSizeandType(P.56)
Whenchangingthepapersizeortype
The factory default settings for paper size and type are  and , respectively. If you load a different size or type of paper into the machine, make sure to change the settings.
If you do not change the...

LoadingPaperintheManualFeedSlot
1469-00W
When you want to print on paper that is not loaded in the paper drawer, load the paper in the manual feed slot. Load
the paper that you usually use in the paper drawer. 
LoadingPaperinthePaperDrawer(P.47)
Makesuretoloadpaperinportraitorientation
Paper cannot be loaded in landscape orientation. Make sure to load the paper in portrait orientation.
1Openthemanualfeedcover.2Spreadthepaperguidesapart.
	 Slide the paper guides outward....

When loading envelopes or paper with a logo, see LoadingEnvelopes(P.52)or LoadingPreprinted
Paper(P.54) .
4Alignthepaperguidesagainsttheedgesofthepaper.
	Slide the paper guides inward until they are aligned securely against the edges of the paper.
Alignthepaperguidessecurelyagainsttheedgesofthepaper
Paper guides that are too loose or too tight can cause misfeeds or paper jams.
5Pulloutthepaperstoppertoopen.ContinuetoSpecifyingPaperSizeandType(P.56)Basic Operations...

LoadingEnvelopes
1469-00X
Make sure to  5atten any curls on envelopes before loading them. Also pay attention to the orientation of envelopes
and which side is face up.
BeforeLoadingEnvelopes(P.52)
LoadedOrientation(P.53)
This section describes how to load envelopes in the orientation you want, as well as procedures that you need to complete before loading envelopes. For a description of the general procedure for loading envelopes in the paper drawer or manual feed slot, see...