Canon printer imageCLASS MF4370dn User Manual

Documents and Print Media 
2-6
  Paper  Requirements  
          Pap er R eq uir e m en ts  Paper Requirements 
Paper cassette Multi-purpose tray
Size (W × L) LTR, LGL, A4, B5, A5, Executive, Envelope (COM10 (#10), Monarch, DL, ISO-C5 (6 3/8" × 9"  (162 × 229 mm)), Oficio, Brazil-Oficio, Mexico-Oficio, Government-LTR, Government-LGL, 
Foolscap, 3" × 5" to 8 1/2" × 14" (76 × 127 to 216 × 356 mm)
Weight 16 to 43 lb (60 to 163 g/m
2)
Quantity Maximum 250 sheets (Height: maximum...

Documents and Print Media 
2-7
  Printable  Area  
            Prin ta b le  A re a Printable Area 
 The shaded area indicates the approximate printable area of LTR paper. Note that the 
margin widths listed are approximate and there may be slight variations in actual use. 


 

Documents and Print Media 
2-8
  Loading  Paper   
      Lo ad in g P ap erLoading Paper
This section describes how to load paper  in the paper cassette and the multi-purpose tray.
The default paper size/type is set to  and  in the setting menu. When you load other size and/or type of 
paper, change the paper size/type setting by pressing  [Paper Settings]. (See “Setting Paper Size and Type,” on p. 2-14.)
 
 In  t h e P ap er C asse tte   In the Paper Cassette 
 Follow the procedure below to load paper...

Documents and Print Media 
2-9
Loading Paper
 5 
Fan the paper stack and even the edges. 
  
 6 
Load the paper into the paper cassette 
with the print side up. Make sure the 
paper stack sits below the small fin (A) on 
the side paper guide. 



 7 
Adjust the paper guide rail to match the 
size of paper. 
  
 8 
Close the front panel of the paper 
cassette. 
  
To load Legal-size paper, leave the front panel of 
paper cassette open and adjust the paper guide 
rail (A) for Legal size paper.
 9 
Match...

Documents and Print Media 
2-10
Loading Paper
  For  MF4350d 
 1 
Open the paper feeding tray. 
  
 2 
Take out the dust cover from inside the 
machine. 
  
 3 
Slide out the paper guide rail (A). 
  
Ô
 4 
Slide the side paper guides (A) to match 
the size of paper. 



If the paper guides do not fit the size of the paper, 
the printout may be skewed.
 5 
Fan the paper stack and even the edges. 
   

Documents and Print Media 
2-11
Loading Paper
 6 
Load the paper into the paper feeding 
tray with the print side up. Make sure the 
paper stack sits below the hook (A) on the 
side paper guide. 



 7 
Adjust the paper guide rail to match the 
size of paper. 
  
 8 
Aligning the protrusions (A) on the both 
sides of the dust cover to the guides (B) 
inside the machine, set the dust cover. 



 In  t h e M ult i- P u rp ose  T ra y    In the Multi-Purpose Tray  
 Use the multi-purpose tray when you want...

Documents and Print Media 
2-12
Loading Paper
 2 
When setting paper, gently insert the 
paper into the multi-purpose tray with 
the print side up. 
  
 When setting an envelope, gently insert the 
envelope into the multi-purpose tray with the 
print side up and the right edge (i.e., closer to 
the stamp) first. 
  
When you load paper with a logo on, position the 
paper with the print side up (logo side) and insert 
it so that the top of the paper feeds first in the 
multi-purpose tray.
 3 
Slide the...

Documents and Print Media 
2-13
Loading Paper
 2 
When setting paper, gently insert the 
paper into the multi-purpose tray with 
the print side up. 
  
 When setting an envelope, gently insert the 
envelope into the multi-purpose tray with the 
print side up and the right edge (i.e., closer to 
the stamp) first. 
  
When you load paper with a logo on, position the 
paper with the print side up (logo side) and insert 
it so that the top of the paper feeds first in the 
multi-purpose tray.
 3 
Slide the...

Documents and Print Media 
2-14
  Setting Paper Size and Type   
      Settin g P ap er S iz e  a n d  T y p eSetting Paper Size and Type
This section describes how to specify the paper size and type you are loading in the paper 
cassette and the multi-purpose tray. Whenever you change the paper size and type in the 
cassette and the tray, follow the procedure in this section to adjust the paper size and type 
settings for the cassette and the tray.
The default settings are as follows:
: LTR
: PLAIN...

Documents and Print Media 
2-15
Setting Paper Size and Type
 Fo r t h e M ult i- P u rp ose  T ra y   For the Multi-Purpose Tray 
 1 
Press  [Paper Settings] repeatedly to 
select , then press [OK]. 
 
MP TRAY
 
 2 
Press [] or [] to select the paper 
size, then press [OK]. 
                  LTR PAPER SIZE
Ex.
 
 You can select from the following paper sizes: 
 , , , , , 
, , , , 
, , , 
, , 
,  
 3 
Press [] or [] to select the paper 
type, then press [OK]. 
          PLAIN PAPER PAPER TYPE
Ex.
 
 You...