Casio Exilim Card EX S600 User Manual

							USING A MEMORY CARD
171
To replace the memory card
1.Press the memory card
into the camera and
then release it. This will
cause the card to come
part way out of the
camera.
2.Pull the memory card out of the slot.
3.Load another memory card.
 IMPORTANT! 
•Never try to insert anything that is not an SD memory
card or MMC (MultiMediaCard) into the camera’s
memory card slot. Doing so can cause malfunction of
the camera.
•Should water or any foreign object ever get into the
card slot, immediately turn off the camera, remove
the battery, and contact your dealer or nearest
CASIO authorized service center.
•Never remove a card from the camera while the
operation lamp is flashing green. Doing so can cause
the file save operation to fail, and even damage the
memory card.
Downloaded From camera-usermanual.com Casio Manuals 
						

							USING A MEMORY CARD
172
Formatting a Memory Card
Formatting a memory card deletes any data already stored
on it.
 IMPORTANT! 
•Be sure to use the camera to format a memory card.
Formatting a memory card on a computer and then
using it in the camera can slow down data
processing by the camera. In the case of an SD card,
formatting on a computer can result in non-
conformity with the SD format, causing problems with
compatibility, operation, etc.
•Note that data deleted by a memory card format
operation cannot be recovered. Check to make sure
you do not need any of the data on the memory card
before you format it.
•Formatting a memory card that contains files deletes
all the files, even those that are protected (page
152).

 To format a memory card
1.Load the memory card into the camera.
2.Turn on the camera, and press [MENU].
3.Select the “Set Up” tab, select “Format”, and
then press [].
4.Use [
] and [] to select “Format”, and then
press [SET]. Entering the PLAY mode after
formatting the memory card will cause the
message “There are no files.” to appear.
•To exit the format operation without formatting,
select “Cancel”.
Downloaded From camera-usermanual.com Casio Manuals 
						

							USING A MEMORY CARD
173

 Memory Card Precautions
•If a memory card starts to behave abnormally, you can
restore normal operation by reformatting it. However, we
recommend that you always take along more than one
memory card whenever using the camera far away from
the home or office.
•We recommend that you format a memory card before
using it for the first time after purchasing it, or whenever
the card you are using seems to be the cause of
abnormal images.
•As you record data to and delete data from an SD
memory card a number of times, it loses its ability to
retain data. Because of this, periodic re-formatting of an
SD memory card is recommended.
•Before starting the format operation, check to make sure
that the camera’s battery is not low. Battery power going
low during formatting can cause improper formatting and
creates the risk of memory card malfunction.
•Never open the battery cover while the format operation
is being performed. Doing so creates the risk of memory
card malfunction.Copying Files
Use the procedures below to copy files between built-in
memory and a memory card.
 IMPORTANT! 
•Only snapshot, movie, audio snapshot, and voice
recording files recorded with this camera can be
copied. Other files cannot be copied.
•Files in the FAVORITE folder cannot be copied.
•Copying an audio snapshot copies both its image file
and the audio file.
Downloaded From camera-usermanual.com Casio Manuals 
						

							USING A MEMORY CARD
174
To copy all the files in built-in memory to
a memory card
1.Load the memory card into the camera.
2.Turn on the camera. Next, enter the PLAY
mode and press [MENU].
3.Select the “PLAY” tab,
select “Copy”, and
then press [].
4.Use [
] and [] to select “Built-in  Card”,
and then press [SET].
•This starts the copy operation and displays the
message “Busy.... Please wait...”.
•After the copy operation is complete, the monitor
screen shows the last file in the folder.
 IMPORTANT! 
•Copy is not possible if there is not enough memory
capacity to hold all of the images you are trying to
copy.
Downloaded From camera-usermanual.com Casio Manuals 
						

							USING A MEMORY CARD
175
To copy a specific file from a memory
card to built-in memory
Files can be copied from a memory card to built-in memory
one at a time. You cannot batch copy multiple files.
1.Perform steps 1 through 3 of the procedure
under “To copy all the files in built-in memory
to a memory card”.
2.Use [
] and [] to select “Card  Built-in”,
and then press [SET].
3.Use [] and [] to select the file you want to
copy.
4.Use [
] and [] to select “Copy”, and then
press [SET].
•This starts the copy operation and displays the
message “Busy.... Please wait...”.
•The file reappears on the monitor screen after the
copy operation is complete.
•Repeat steps 3 through 4 to copy other images, if
you want.
5.Press [MENU] to exit the copy operation.
 NOTE 
•Files are copied to the folder in built-in memory
whose name has the largest number.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
176
PRINTING IMAGES
A digital camera provides you with a variety of different
ways to print the images it records. The three main printing
methods are described below. Use the method that best
suits your needs.

 Professional Print Service
The camera’s DPOF feature lets you specify which images
you want to print and how many copies of each you want.
For more information, see “DPOF” (page 177).
 NOTE 
•Certain print service providers may not support
DPOF or may support different printing protocols. In
this case, use the protocol supported by your print
service to specify the images you want to have
printed.

 Printing Directly on a Printer Equipped with
a Card Slot, or a Printer that Supports USB
DIRECT-PRINT or PictBridge
After using the camera’s DPOF feature to specify the
images you want to print and how many copies of each
should be printed, you can plug the memory card into a
printer equipped with a card slot, or connect the camera to
a PictBridge or USB DIRECT-PRINT printer for printing.
For more information, see “DPOF” (page 177) and “Using
PictBridge or USB DIRECT-PRINT” (page 180).
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
177
DPOF
The letters “DPOF” stand for “Digital Print
Order Format”, which is a format for
recording on a memory card or other medium
which digital camera images should be
printed and how many copies of the image
should be printed. Then you can print on a
DPOF-compatible printer or at a professional
print service in accordance with the file name
and number of copies settings recorded on
the card.
With this camera, you can select images by viewing them
on the monitor screen without needing to remember file
names, their locations in memory, etc.

 DPOF Settings
File Name,
number of copies,
date

 Printing with a Computer
Windows Users
The camera comes bundled with Photo Loader and
Photohands applications, which can be installed on a
Windows computer for image transfer, management, and
printing. For more information, see “Using the Camera with
a Windows Computer” (pages 186, 204).
Macintosh Users
The camera comes bundled with Photo Loader for the
Macintosh, which can be installed for image transfer and
management, but not for printing. Use commercially
available software for printing with a Macintosh. For more
information, see “Using the Camera with a Macintosh
Computer” (pages 194, 219).
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
178
5.Use [
] and [] to specify the number of
copies.
•You can specify up to 99 for the number of copies.
Specify 00 if you do not want to have the image
printed.
6.To turn on date
stamping for the
prints, press [BS] so
“On” is displayed.
•“On” indicates that date
stamping is turned on.
•To turn off date stamping
for the prints, press [BS]
so “Off” is displayed.
•Repeat steps 4 through 6 if you want to configure
other images for printing.
7.After all the settings are the way you want,
press [SET] to apply them.
To configure print settings for a single
image
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab,
select “DPOF”, and
then press [].
3.Use [
] and [] to select “Select images”,
and then press [].
4.Use [] and [] to
display the image you
want.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
179
To configure print settings for all images
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “DPOF”, and
then press [].
3.Use [
] and [] to select “All images”, and
then press [].
4.Use [
] and [] to
specify the number of
copies.
•You can specify up to 99
for the number of copies.
Specify 00 if you do not
want to have the image
printed.
5.To turn on date stamping for the prints, press
[BS] so “On” is displayed.
•“On” indicates that date stamping is turned on.
•To turn off date stamping for the prints, press [BS] so
“Off” is displayed.
6.After all the settings are the way you want,
press [SET] to apply them.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
180
 IMPORTANT! 
•DPOF settings are not cleared automatically after
printing is complete. This means that if you perform
another printing operation without clearing DPOF
settings, printing will be performed in accordance
with the last settings you configured. If you want to
prevent this from happening, perform the procedure
under “To configure print settings for all images”
(page 179) and change the number of copies to “00”.
After that, you can configure new DPOF settings as
required.
•If you take a memory card to a professional print
service, be sure to tell them that it includes DPOF
settings for the images to be printed and the number
of copies. If you don’t, the printing service may print
all images without regard to your DPOF settings, or
date printing may not be performed.
•Note that some professional print services do not
support DPOF printing. Check with your service
before ordering prints.
•Some printers may have settings that disable date
stamp and/or DPOF printing. See the user
documentation that comes with your printer for
details about how to enable these features.Using PictBridge or USB DIRECT-PRINT
You can connect the camera
directly to a printer that supports
PictBridge or USB DIRECT-PRINT,
and perform image selection and
printing using the camera monitor
screen and controls. DPOF support
(page 177) also lets you specify
which images you want to print and
how many copies of each should be
printed.
•PictBridge is a standard
established by the Camera and
Imaging Products Association
(CIPA).
•USB DIRECT-PRINT is a
standard proposed by Seiko
Epson Corporation.
Downloaded From camera-usermanual.com Casio Manuals