Casio Exilim Card EX S600 User Manual

							PRINTING IMAGES
181
Select this setting:
Mass Storage (USBDIRECT-PRINT)
PTP (PictBridge) When connecting to this type of
device:
Computer or USB DIRECT-
PRINT-compatible printer
PictBridge-compatible printer
1.Press [MENU].
2.Select the “Set Up” tab, select “USB”, and
then press [].
3.Use [
] and [] to select the setting you
want, and then press [SET].
•Mass Storage (USB DIRECT-PRINT) causes the
camera to see the computer as an external storage
device. Use this setting for normal transfer of images
from the camera to a computer (using the bundled
Photo Loader application).
•PTP (PictBridge) simplifies the transfer of image data
to the connected device.
4.Connect the USB cable that comes bundled
with the camera to the USB cradle and a
printer.
•Also, connect the AC adaptor to the USB cradle and
plug the AC adaptor into an electrical outlet.
•If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
•Nothing appears on the camera’s monitor screen if
the camera is on the USB cradle while the bundled
AV cable is connected to the cradle. Be sure to
disconnect the AV cable from the cradle if you want
to use the camera’s monitor screen to view images.
USB port
Connector AUSB cable
(bundled)
Connector B
[](USB port)
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
182
5.Turn off the camera, and then set the camera
on the USB cradle.
6.Turn on the printer.
7.Load paper for printing the images into the
printer.
8.Press the USB
cradle’s [USB] button.
•This displays the print
menu on the camera’s
monitor screen.
9.Use [
] and [] to select “Paper Size”, and
then press [].
10.Use [
] and [] to
select the paper size
you want to use for
printing, and then
press [SET].
•The following are the
print sizes that are
available.
3.5˝ ×
 5˝
5˝ ×
 7˝
4˝ ×
 6˝
A4
8.5˝ ×
 11˝
By Printer
•Selecting “By Printer” prints using the paper size
selected on the printer.
•Available paper size settings depend on the
connected printer. For full details, see the
instructions that come with your printer.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
183
11.Use [
] and [] to specify the print option
you want.
•To print a single image: Select “1 Image” and then
press [SET]. Next, use [] and [] to select the image
you want to print.
•To print multiple images or all images: Select “DPOF
Printing”, and then press [SET]. Selecting this option
will print the images selected with the DPOF settings.
See page 178 for more information.
•You can toggle date stamping of the image on and
off by pressing [BS]. The date stamp will be printed
when “On” is indicated on the monitor screen.
“On” indicates that date stamping is turned on.
12.On the camera’s monitor screen, use [
] and
[] to select “Print”, and then press [SET].
•This starts printing and displays the message
“Busy.... Please wait...” on the monitor screen. The
message will disappear after a short while, even
though printing is still being performed. Pressing any
of the camera’s buttons while printing is in progress
will cause the message to reappear.
•The print menu will appear when printing is
complete.
•If you selected “1 Image” in step 11, you can select
another image for printing and then repeat this step
to print.
13.After you are finished printing, press the USB
cradle’s [USB] button, and then turn off the
camera.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
184
Date Printing
Any one of the procedures described below can be used to
include the recording date in image prints. Correct date
printing requires that the current date be set on the camera
before the image is recorded.
•Specifying date printing with DPOF settings (page 178)
–Some printers may have settings that disable time
stamp and/or DPOF printing. See the user
documentation that comes with your printer for details
about how to enable these features.
–Note that some professional print services do not
support DPOF printing. Check with your service before
ordering prints.
•Specifying date printing with the Photohands software
that comes with the camera
–See page 23 of the Photohands User’s Guide for
details. The Photohands User’s Guide is provided as a
PDF file on the CD-ROM that comes bundled with your
camera.
•Specifying date printing when having printing done by a
print service
–Some print services do not support date printing. Check
with your service for more information.

 Printing Precautions
•See the documentation that comes with your printer for
information about print quality and paper settings.
•Contact your printer manufacturer for information about
models that support PictBridge and USB DIRECT-PRINT,
upgrades, etc.
•Never disconnect the USB cable, or perform any camera
or USB cradle operation while printing is in progress.
Doing so causes a printer error.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
185
Exif Print
Exif Print is an
internationally supported,
open standard file format
that makes it possible to
capture and display vibrant
digital images with accurate
colors. With Exif 2.2, files
include a wide range of
shooting condition
information that can be
interpreted by an Exif Print
printer to produce better-
looking prints.
 IMPORTANT! 
•Information about the availability of Exif Print
compatible printer models can be obtained from each
printer manufacturer.
PRINT Image Matching III
Images include PRINT Image MatchingIII data (mode setting and other camera
setup information). A printer that
supports PRINT Image Matching 
IIIreads this data and adjusts the printed
image accordingly, so your images
come out just the way you intended
when you recorded them.
*Seiko Epson Corporation holds the
copyright for PRINT Image Matching and
PRINT Image Matching 
III.
Downloaded From camera-usermanual.com Casio Manuals 
						

							VIEWING IMAGES ON A COMPUTER
186
VIEWING IMAGES ON A COMPUTER
After using the USB cradle to establish a USB connection
between the camera and your computer, you can use your
computer to view images in file memory and copy images
to your computer’s hard disk or other storage media. In
order to do this, you first need to install the USB driver
located on the CD-ROM that comes bundled with the
camera onto your computer.
Note that the procedure you need to perform depends on
whether you are using computer running under Windows
(see below) or a Macintosh (see page 194).Using the Camera with a Windows
Computer
The following are the general steps for viewing and copying
files from a computer running under Windows. You can find
details about each operation in the procedures that follow
below. Note that you should also refer to the
documentation that comes with your computer for other
information about USB connections, etc.
1. If you are running Windows 98SE or 98, install the
USB driver onto your computer.
• You need to perform this step only once, the first
time you connect to your computer.
• If you are running Windows XP, 2000, or Me, you do
not need to install the USB driver.
2. Use the USB cradle to establish a connection between
the camera and computer.
3. View and copy the images you want.
Downloaded From camera-usermanual.com Casio Manuals 
						

							VIEWING IMAGES ON A COMPUTER
187
 IMPORTANT! 
• Low battery power can cause the camera to power
down suddenly during data communication. Use of
the special AC adaptor is recommended to power the
camera during data communication.
• If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
• If you want to transfer files from the camera’s built-in
memory to a computer, make sure there is no
memory card loaded in the camera before you place
it onto the USB cradle.
• This camera supports USB 2.0 Hi-Speed protocol.
Though it can be used with a computer that supports
only USB 1.1 protocol, higher speed data transfer
becomes possible when USB 2.0 Hi-Speed is
supported. Note that certain computer models,
connecting through a USB hub, and other system
conditions can slow down data transfer and even
cause operational problems.Do not try to establish a connection between the
camera and computer before installing the USB
driver onto the computer. If you do, the computer will
not be able to recognize the camera.
• USB driver installation is required in the case of
Windows 98SE and 98. Do not connect the camera to
a computer running one of the above operating
systems without installing the USB driver first.
• USB driver installation is not required in the case of
Windows XP, 2000, and Me.
Downloaded From camera-usermanual.com Casio Manuals 
						

							VIEWING IMAGES ON A COMPUTER
188
1.What you should do first depends on whether
your computer is running under Windows XP,
2000, Me, 98SE, or 98.
Windows 98SE/98 Users
• Start from step 2 to install the USB driver.
• Note that the example installation presented here
uses Windows 98.
Windows XP/2000/Me Users
• Installation of the USB driver is not required, so jump
directly to step 6.
2.Set the bundled CD-ROM into the CD-ROM
drive of your computer.
• Use the CD-ROM whose contents label shows “USB
driver”.
3.On the menu screen that appears, click
“English”.
4.Click [USB driver B] and then [Install].
• This starts installation.
• Follow the instructions that appear on your computer
screen to complete the installation.
• The following steps show installation under the
English version of Windows.
Downloaded From camera-usermanual.com Casio Manuals 
						

							VIEWING IMAGES ON A COMPUTER
189
5.When the final setup screen appears, click the
[Exit] button on the CD-ROM menu to exit the
menu, and then remove the CD-ROM from
your computer.
• With some computer operating systems, a message
prompting you to restart your computer may appear.
If this happens, restart your computer. The CD-ROM
menu will appear again after your computer restarts.
Click the [Exit] button on the CD-ROM menu to exit
the menu, and then remove the CD-ROM from your
computer.
6.Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then
plug it in to a household power outlet.
• If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
• Note that the shape of the AC adaptor depends on
the area where you purchased the camera.
aaaaaaaaaaaaaaaaaaaaaaaaaaa
[DC IN 5.3V]
[DC IN 5.3V]
Downloaded From camera-usermanual.com Casio Manuals 
						

							VIEWING IMAGES ON A COMPUTER
190
• Take care when connecting the USB cable to the
USB cradle or your computer. USB ports and cable
plugs are shaped for proper positioning.
• Plug the USB cable plugs into the ports securely, as
far as they will go. Proper operation is not possible if
connections are not correct.
8.Press the camera’s power button to turn it on,
and then press its [MENU] button.
9.Select the “Set Up” tab, select “USB”, and
then press [
].
10.Use [] and [] to select “Mass Storage (USB
DIRECT-PRINT)”, and then press [SET].
11.Turn off the camera.
7.Connect the USB cable that comes bundled
with the camera to the USB cradle and your
computer’s USB port.
USB port
Connector AUSB cable
(bundled)
[](USB port) Connector B
Downloaded From camera-usermanual.com Casio Manuals