Casio Projector XJ-H1700 XJ-H1750 User Manual

							21
Configuring Advanced Projector Settings
Your projector has a setup menu that you can use to configure advanced settings.
Displaying the Setup Menu
Pressing the [MENU] key displays the menu shown below in the center of the projection screen.
To exit the setup menu
Press the [MENU] key.
Configuring Setup Menu Settings
1.Press the [MENU] key to display the setup menu.
2.Use the [T] and [S] keys to select the main menu item you want by highlighting 
it.
3.Press the [ENTER] key.
4.Use the [T] and [S] keys to select the sub-menu item you want by highlighting it.
5.Perform the required operation on the selected sub-menu item screen.
zThe guidance text explains the operations you need to perform to configure each setting.
6.To return to the main menu from the sub-menu, press the [ESC] key.
7.To exit the setup menu, press the [MENU] key.
Basic Setup Menu Operations
Main menu
Pressing the [MENU] key displays the main menu. 
The currently selected menu item is the one that is 
highlighted.
Sub-menu
The sub-menu shows each individual setting under each 
main menu item, and its current setting.
Guidance text
Guidance text provides a brief description of the main 
key operations available for the operation you are 
currently performing. 
						

							22
Basic Setup Menu Example
The procedure below shows how to configure the following three settings:
zImage Adjustment 1 J Contrast
zImage Adjustment 1 J Color Mode
zInput Settings J Signal Name Indicator
NotezThe setup menu items that you can change depend on whether or not an image signal is being 
input to the projector, and on the currently selected input source. Perform the procedure 
below after starting projection of an image from an input source in the normal input mode. See 
“3D Input Mode” on page 11 for information about how to do this.
zThis example covers basic steps only. For more detailed information, see “Setup Menu 
Contents” on page 29.
To configure the “Image Adjustment 1 J Contrast” setting
1.Press the [MENU] key to display the setup menu.
2.“Image Adjustment 1” is initially selected on the main menu, so simply press the 
[ENTER] key.
3.Use the [T] key to select “Contrast”.
4.Use the [W] (lighter) and [X] (darker) keys to adjust contrast. 
						

							23
To configure the “Image Adjustment 1 J Color Mode” setting
5.Use the [T] key to select “Color Mode”.
6.Press the [ENTER] key.
zThis displays the color mode menu.
7.Use the [T] and [S] keys to select the color mode you want, and then press the 
[ENTER] key.
8.After selecting the color mode you want, press the [ESC] key.
To configure the “Input Settings J Signal Name Indicator” setting
9.Press the [ESC] key.
10.Use the [T] key to select “Input Settings”.
11.Press the [ENTER] key.
12.Use the [T] key to select “Signal Name Indicator”.
13.Use the [W] and [X] keys to select “On” or “Off”.
14.After you are finished, press the [MENU] key to exit the setup menu.
Direct Power On
You can configure the projector so it powers up automatically as soon as you plug it into a power 
source. With this “Direct Power On” feature, you do not even need to press the [P] (Power) key. To 
enable Direct Power On, display the setup menu, and then change the “Direct Power On” setting to 
“On”.
Important!When you have Direct Power On enabled, do not leave the projector plugged into an electrical 
outlet while it is turned off. If you do, there is the chance that it (and the light source unit) might 
turn on automatically when power is restored after being cut off by a power outage, tripping of a 
breaker, etc.
NotezDirect Power On causes the projector to turn on automatically as soon as it is plugged into a 
power outlet. This greatly reduces the amount of time it takes until you are ready to start 
projecting. Note, however, that the actual startup sequence (Standby StateJ Power OnJ 
Projection Starts) that the projector performs is the same, regardless of whether Direct Power 
On is enabled or disabled. The only difference is what triggers the sequence (plugging in or 
pressing the [P] (Power) key).
zFor details about configuring the Direct Power On setting, see “Direct Power On” under 
“Option Settings 1 Main Menu” on page 35. 
						

							24
The password feature lets you keep unauthorized individuals from using the projector. You can specify 
whether password input is required whenever you turn on the projector, and you can specify and 
change the password as required. Use the setup menu “Option Settings 1J Power On Password” 
setting to configure power on password settings.
Inputting a Password
The password of your projector is not really a “word” made up of letters, but rather a sequence of 
remote controller key inputs. The following is the 8-key sequence that represents the initial factory 
default password.
Using the Password Feature
Note the following precautions whenever you use the password feature.
zThe password feature protects against unauthorized use of the projector. Note that it is not an 
anti-theft measure.
zYou will need to enter the initial factory default password the first time you use the projector after 
turning on the password feature. Change the initial factory default password to a different one of 
your choice as soon as possible after turning on the password feature.
zRemember that password operations are always performed using the remote controller, so you 
should take care not to lose or misplace the remote controller.
zAlso note that you will not be able to input the password if the remote controller batteries are dead. 
Replace the remote control batteries as soon as possible after it starts to go low.
If you forget your password...
You will not be able to use the projector if you forget the password for some reason. If you forget the 
password, you will need to bring the following two items to your CASIO distributor to have the 
password cleared. Note that you will be charged to have the password cleared.
Note that your CASIO distributor will not be able to clear the password of your projector unless you 
bring both of the items listed above.
Also, keep the projector’s warranty in a safe place.
Important!Having your password cleared using the procedure described above will return all of the settings 
of your projector, except for the Light Time, to their initial factory defaults.
Password Protecting the Projector
[INPUT] [AUTO] [BLANK] [FREEZE] [S] [T] [W] [X]
1. Personal identification (original or copy of your driver’s license, employee I.D., etc.)
2. Projector unit 
						

							25
Keep a written record of your password!
You will not be able to use the projector if you forget its password. We strongly suggest that you keep 
a written or other type of record of the password so you can look it up when necessary.
To change the password
1.Press the [MENU] key to display the setup menu.
2.Use the [T] key to select “Option Settings 1”, and then press the [ENTER] key.
3.Use the [T] key to select “Power On Password”, and then press the [ENTER] 
key.
zThis will display a dialog box prompting you to enter the current password.
4.Enter the current password.
zIf the projector is still protected by the factory default password, perform the key operation 
shown below to enter it.
5.After entering the current password, press the [ENTER] key.
zThis displays the Power On Password setting screen.
6.Use the [T] key to select “Change Password”, and then press the [ENTER] key.
zThis will display a dialog box prompting you to enter the new password.
7.Enter a key sequence up to eight key operations long.
zYou can use any of the following keys as part of your password key sequence. 
[INPUT], [AUTO], [BLANK], [FREEZE], [VOLUME], [COLOR MODE], [D-ZOOM +], [D-ZOOM –], 
[KEYSTONE +], [KEYSTONE –], [MENU], [POINTER], [O], [f], [Z], [S], [T], [W], [X], [FUNC]
8.After entering the new password, press the [ENTER] key.
zThis will display a dialog box prompting you to enter the same password again.
9.Re-enter the same password key sequence you entered in step 7 and then press 
the [ENTER] key.
zThe message “Your new password has been registered.” indicates that the password has 
been changed. Press the [ESC] key.
zIf the password you entered in this step is different from the one you entered in step 7, the 
message “The password you input is wrong.” appears. Press the [ESC] key to return to step 7.[INPUT] [AUTO] [BLANK] [FREEZE] [S] [T] [W] [X] 
						

							26
To turn password protection on and off
1.Display the Power On Password setting screen by performing steps 1 through 5 
of the procedure under “To change the password” on page 25.
zAt this time, make sure that “Power On Password” is selected on the Power On Password 
setting screen.
2.Use the [W] and [X] keys to select “On” or “Off”.
zChanging the power on password setting from “Off” to “On” causes the confirmation dialog 
box shown below to appear.
Press the [ENTER] key to confirm that you want to turn on power on password protection, or 
[ESC] to exit the dialog box without doing anything.
3.After you are finished, press the [MENU] key to exit the setup menu.
Entering the Password when Turning On the Projector
When you turn on the projector while password protection is turned on will cause a password input 
dialog box to appear on the projection screen. All projector operations will be accessible to you after 
you input the correct password and press the [ENTER] key. 
						

							27
You can use the procedures in this section to restore all of the settings on a particular main menu or all 
of the settings on the setup menu to their initial factory defaults.
To restore all settings on a particular main menu to their initial factory 
defaults
1.Press the [MENU] key to display the setup menu.
2.Use the [T] and [S] keys to select the main menu whose settings you want to 
restore to their initial factory defaults.
zYou can select Image Adjustment 1, Image Adjustment 2, Volume Adjustment, Screen 
Settings, Input Settings, Option Settings 1, or Option Settings 2.
3.Press the [ENTER] key.
4.Use the [T] key to select “Restore Menu Defaults”.
5.Press the [ENTER] key.
zThis will display a confirmation screen like the screen shown below.
6.Use the [S] key to select “Yes”.
7.To restore the settings of the main menu to their initial defaults, press the 
[ENTER] key.
zTo exit the operation without doing anything, press [ESC] instead of [ENTER].
8.After you are finished, press the [MENU] key to exit the setup menu.
NotezThe language setting and the password are not returned to their initial factory defaults if you 
select Option Settings 1 in step 2.
zFor details about how the above procedure initializes settings, see the explanations of the 
settings under “Setup Menu Contents” on page 29.
Restoring Projector Settings to Their Initial Factory 
Defaults 
						

							28
To restore all settings on the setup menu to their initial factory defaults
1.Press the [MENU] key to display the setup menu.
2.Use the [T] key to select “Restore All Defaults” and then press the [ENTER] key.
3.After confirming that “Restore All Defaults” sub-menu is selected, press the 
[ENTER] key.
zThis displays a confirmation message asking if you want to initialize all settings.
4.Use the [S] key to select “Yes”.
5.To restore all settings on the setup menu to their initial defaults, press the 
[ENTER] key.
zThis will restore all of the settings to their initial factory defaults, except for the Language, 
Light Time, Unit Operating Time and password settings.
zTo exit the operation without doing anything, press [ESC] instead of [ENTER].
6.After you are finished, press the [MENU] key to exit the setup menu. 
						

							29
This section contains tables that provide detailed explanations of all of the items included on the setup 
menu. The following describes the type of information that appears in each of the columns of the 
tables.
Image Adjustment 1 Main Menu
Setup Menu Contents
Setting Name: This column shows the names of the settings as they appear on the sub-menu.
Input: This column shows the input source for which each setting is supported.
Input source names are abbreviated as follows:
R : RGB input
C  : Component video input
V  : Video or S-video input
H : HDMI (PC) input
D  : HDMI (DTV) input
U  : USB input (USB port models only)
The letter N indicates that the setting can be configured while there is no input signal.
Setting Unit: The setting unit indicates how a setting is stored.
“Source Specific” in this column indicates that separate settings can be stored for each 
individual input source.
“Single” in this column indicates that a single setting is stored and applied, regardless of 
the input source.
Description: This column provides details about the setting item and how to select it. The initial 
default setting is indicated by an asterisk (*).
Setting NameInputSetting UnitDescription
Brightness
RCVHDUSource 
SpecificUse this sub-menu to adjust the brightness of the projected image. 
A larger value produces a brighter image.
Contrast
RCVHDUSource 
SpecificUse this sub-menu to adjust the contrast of the projected image. 
A larger value produces a stronger contrast.
Sharpness
VSource 
SpecificUse this sub-menu to adjust the sharpness of the outlines in the 
projected image. A larger value makes the image sharper, while a 
smaller value makes it softer.
Saturation
VSource 
SpecificUse this sub-menu to adjust the color saturation of the projected 
image. A larger value increases color saturation.
Tint
VSource 
SpecificUse this sub-menu to adjust the tint of the projected image. 
A larger value makes the overall image more bluish, while a smaller 
value makes the overall image more reddish. This setting is 
supported only when the signal is NTSC or NTSC4.43. 
						

							30
Color ModeRCVHDUSource 
SpecificYou can select from among various different color mode settings in 
accordance with image contents and projection conditions.
Standard:
Use this setting when you want to highlight the colors of your 
presentation.
Graphics:
Use this setting when you want photographs and graphics to 
appear natural.
Theater:
Use this setting to bring out the dark portions of your images.
Blackboard:
Use this setting for easy viewing when projecting onto a 
blackboard.
Game:
Use this setting to optimize hue and brightness.
Color Balance
RCVHDUSource 
SpecificThis sub-menu lets you adjust the color balance of the projected 
image.
Preset:
You can select from among three preset color balance settings: 
Warm, Normal,* Cold.
Color:
You can adjust the intensity of red, green, and blue within the 
range of –50 to +50. The intensity of a color increases along with 
the setting value. Color settings can be adjusted individually only 
when “Normal” is selected as the “Preset” setting.
Eco Off Mode
RCVHDUNSingle When “Off” is selected for “Option Settings 1J Eco Mode”, you can 
select either of the following projection image modes.
Bright:
Gives priority to brightness.
Normal:
Suppresses brightness slightly and gives priority to color balance.
Restore Menu 
Defaults
RCVHDUSource 
SpecificUse this sub-menu to return all of the sub-menu items on the Image 
Adjustment 1 main menu to their initial default
settings.
zRestoring menu defaults when there is no input signal will restore 
defaults for the currently selected input source.
Setting NameInputSetting UnitDescription