Chisholm Aurora S500 Svga Lcd Projector Reference Manual
Here you can view all the pages of manual Chisholm Aurora S500 Svga Lcd Projector Reference Manual. The Chisholm manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
Page 15 __________________________________________________________________________________________________________________________________________________________ Aurora S500 For complete alignment of the image in any direction, use the Information Menu as discussed in the following pages. Volume Control Keys If the Menu key has not been pressed, the keys will allow you to adjust the v olume up or down. If On-Screen Prompts are enabled in the Preferences Menu, a volume adjustment...
Page 22
Page 16 ____________________________________________________________________________________________________________________________________________________________ Aurora S500
Page 23
Page 17 __________________________________________________________________________________________________________________________________________________________ Aurora S500 7 Red Blue Green Video Menu The Video Menu allows you to make adjustments to the currently selected video source. The Projector automatically sets the recommended parameters for the v ideo you are using; howev er, you may wish to make additional adjustments with the Video Menu. Any changes you make affect only...
Page 24
Page 18 ____________________________________________________________________________________________________________________________________________________________ Aurora S500 Red Level Green Level Blue Level The Red Level is used to adjust the amount of red in the image. + Red will increase red in the image, and - Red will decrease red in the image. Use the Green Level and Blue Level controls to perfect the image color setting. The Red Level control will appear in a light gray Red...
Page 25
Page 19 __________________________________________________________________________________________________________________________________________________________ Aurora S500 NOTE: XGA is supported only at 60 Hertz. Using the software provided with your video card, check your video card setting to ensure 60 Hertz has been selected. The Frequency Shift adjustment is used to correct vertical bands of distortion in the projected image. The easiest way to determine the need to make...
Page 26
Page 20 ____________________________________________________________________________________________________________________________________________________________ Aurora S500 Audio Menu The Audio Menu allows you to adjust the audio attached to the v ideo source you are viewing. Any audio changes you make are automatically sav ed. Press the Menu and then the Audio key and the Audio Menu to the right will be displayed. To exit the menu, press the Menu key. If you have the...
Page 27
Page 21 __________________________________________________________________________________________________________________________________________________________ Aurora S500 selected video source. Selecting Int enables the Projector’s internal 12-watt stereo speaker system and disables the audio output. Selecting Ext enables the Projector’s audio output for use with an external amplifier and speaker system and disables the internal speakers.
Page 28
Page 22 ____________________________________________________________________________________________________________________________________________________________ Aurora S500 Preferences Menu The Preferences Menu allows you to configure the Projector and the WritingPad or PenPal to your liking. If you do not have the Annotation feature or it is not connected, Notepad Color and Pen Barrel Buttons are disabled and they will appear in a light gray. Press the Menu key and then...
Page 29
Page 23 __________________________________________________________________________________________________________________________________________________________ Aurora S500 Pen Barrel Buttons allows you to choose the mode of operation for the Pen barrel buttons of the WritingPad and PenPal Annotation options. For the PenPal, selecting Custom or Std enables the lower Pen barrel button for erase when the Pencil is selected and right mouse click when the Mouse is selected. W hen Off...
Page 30
Page 24 ____________________________________________________________________________________________________________________________________________________________ Aurora S500 Any changes you make in Custom mode are automatically saved so that the next time you use Custom mode your last Pen tip setting and barrel button settings will be restored. If you are sharing the Projector with other users, you may wish to set Pen Barrel Buttons to Off when you are done with the Projector....