Chisholm Aurora S500 Svga Lcd Projector Reference Manual

Page 45 
__________________________________________________________________________________________________________________________________________________________  
 
  
  
Aurora S500 
Left Mouse Button Right Mouse Button Double Click/Left Mouse Button 
The Pen Barrel Buttons must be set to STD in the Preferences Menu for the Pen barrel button 
mouse features to work. 
 
 
To use the PC mouse, depress the Pen tip on the Mouse  Tool.  Position the mouse on the 
image by moving the Pen tip over the...

Page 46 
____________________________________________________________________________________________________________________________________________________________  
  
  
  
Aurora S500 
 
  Frame 
 
Frame allows you to create a rectangular frame for diagramming or framing areas of interest.  To 
create a frame , select the Frame  Tool with the Pen tip, position the upper right-hand 
corner of the Frame  symbol at a corner of the frame  to be drawn, depress the Pen tip, 
draw a diagonal of the frame ,...

Page 47 
__________________________________________________________________________________________________________________________________________________________  
 
  
  
Aurora S500 
 
Manipulating  and  Objects 
 
 
The Frame  and Box  Tools create objects (  and  ) that can be moved or re-sized.  
These operations are performed by grabbing a corner of a frame  or box  as described 
below.  Any tool except Mouse  may be selected. 
 
To move a frame  or box , position the current Tool symbol inside...

Page 48 
____________________________________________________________________________________________________________________________________________________________  
  
  
  
Aurora S500 
Upper Barrel Button 
 
If Pen Barrel Buttons is STD in the Preferences Menu, depressing the upper Pen barrel button will 
temporarily switch the Tool to a Large Eraser  and allow you to erase any WritingPad data 
that passes under the Large Eraser  while the Pen tip is depressed.  Release the Pen barrel 
button and...

Page 49 
__________________________________________________________________________________________________________________________________________________________  
 
  
  
Aurora S500 
 
     Colors 
 
Eight (8) colors and highlight are available with a Tool or Icon.  Touching a Color button selects that color 
for use with the selected Tool or Icon until another Color button is touched.  Each Pad retains its last used 
Color; therefore, switching Pads will automatically restore the selected Color....

Page 50 
____________________________________________________________________________________________________________________________________________________________  
  
  
  
Aurora S500 
 
  Medium 
 
Medium allows you to draw or erase a medium line (3 pixels plus an outline).  To select Medium, 
depress the Pen tip on the Medium  Size. 
 
  Large 
 
Large allows you to draw or erase a thick line (4 pixels plus an outline).  To select Large, depress 
the Pen tip on the Large  Size. 
 
  Bold 
 
Bold...

Page 51 
__________________________________________________________________________________________________________________________________________________________  
 
  
  
Aurora S500 
 
   Source Selection 
 
Up to six (6) video sources may be connected simultaneously to the Projector (PC or Macintosh 
on RGB 1 and RGB 2, S-Video on Video 1 and Video 2, composite video on Video 1 and Video 2).  
The Source button allows you to sequentially switch between connected sources.  If Video 1 or 
Video 2 has...

Page 52 
____________________________________________________________________________________________________________________________________________________________  
  
  
  
Aurora S500 
TROUBLESHOOTING 
 
On the following pages is a list of problems and probable causes.  If your problem can be identified from 
the list, check the probable causes for a solution.  If you continue to have trouble resolving your problem, 
contact our customer support group at the number displayed on the Projector at...

Page 53 
__________________________________________________________________________________________________________________________________________________________  
 
  
  
Aurora S500 
 
Fan failure message 
 
· The Projector constantly checks for proper operation of the fan.  If a fan failure occurs, the fan failure 
message will appear.  To clear a fan failure message condition, depress the Source key on the 
Projector.  To avoid damage to the LCD or the Lamp, discontinue the use of the Projector...

Page 54 
____________________________________________________________________________________________________________________________________________________________  
  
  
  
Aurora S500 
Split image or partial image 
 
· Image alignment needed; use the left, right, up and down keys the Information Menu selected. 
· Incompatible video signal from computer. 
 
Visible bright or dark spots 
 
· An inactive subpixel may appear as a bright or dark spot on the display.  The Projector may contain as 
many as...