Home > Christie > Projector > Christie Christi Eprojector Mirage S+22k J Technical Manual

Christie Christi Eprojector Mirage S+22k J Technical Manual

Add to Favourites
    Download as PDF

    View the Christie Christi Eprojector Mirage S+22k J Technical Manual for free. All the Christie manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 J Series Serial Commands Technical Reference Information1 of 90020-100796-01 Rev. 1 (10-2011) J Series Serial Commands Technical Reference Information INTRODUCTION This document describes the serial protocol, consisting of ASCII text messages, used to control an J Series projector remotely. CONNECTION AND USE: Once you have connected your computer to either the RS232 IN or RS422 IN port (depending on which standard is supported by your computer) or to the ETHERNET port on a projector, you can...
    Page 2 2 of 90J Series Serial Commands Technical Reference Information020-100796-01 Rev. 1 (10-2011) The smallest step size for any parameter is always 1. For some controls (i.e. Size) the value displayed on the screen has a decimal point. (e.g. 0.200 to 4.000) In this case, the values used for the serial communications is an integer value (e.g. 200 to 4000), not the decimal value seen on the screen. Regardless of message type or origin, all messages use the same basic format and code. Opening and closing...
    Page 3 J Series Serial Commands Technical Reference Information3 of 90020-100796-01 Rev. 1 (10-2011) •+SUBCODE: The projector function you wish to work with may have one or more subcodes that will allow you to select a specific source, image, channel or subfunction. The subcode is represented by a four-character ASCII code (A-Z, upper or lower case, and 0-9). This subcode appears immediately after the function code, with a “+” character to separate the code and subcode. If there is no subcode, the “+” is...
    Page 4 4 of 90J Series Serial Commands Technical Reference Information020-100796-01 Rev. 1 (10-2011) Table 2 - Special Characters for Text SAMPLE MESSAGES AND THEIR MEANING Table 3 - Sample Messages and Their Meaning If you want this... Enter this... Description \ \\ Backslash ”\”Quote ( \( Left Bracket ) \) Right Bracket 0x0A New line - if the text can be displayed on more than one line, this will set the line break. \h## Sends one arbitrary code defined by the 2 hexadecimal digits ## For a Single...
    Start reading Christie Christi Eprojector Mirage S+22k J Technical Manual

    Related Manuals for Christie Christi Eprojector Mirage S+22k J Technical Manual

    All Christie manuals