Cisco 1812j Manual

CH A P T E R
 
2-1
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
OL-6425-03
2
Preinstallation Requirements
This chapter describes the site requirements and equipment necessary for installing your Cisco 1800 
series fixed-configuration integrated services router. This chapter includes the following sections:
 Safety Recommendations, page 2-2
 General Site Requirements, page 2-4
 Installation Checklist, page 2-5
 Creating a Site Log, page 2-6
 Inspecting the Router, page...

 
2-2
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
OL-6425-03
Chapter 2      Preinstallation Requirements
  Safety Recommendations
Safety Recommendations
Follow these guidelines to ensure general safety: 
 Keep the chassis area clear and dust-free during and after installation.
 If you remove the chassis cover, put it in a safe place. 
 Keep tools and chassis components away from walk areas. 
 Do not wear loose clothing that could get caught in the chassis. Fasten...

 
2-3
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
OL-6425-03
Chapter 2      Preinstallation Requirements
  Safety Recommendations
In addition, use the following guidelines when working with any equipment that is disconnected from a 
power source, but still connected to telephone wiring or other network cabling:
 Never install telephone wiring during a lightning storm. 
 Never install telephone jacks in wet locations unless the jack is specifically designed for it....

 
2-4
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
OL-6425-03
Chapter 2      Preinstallation Requirements
  General Site Requirements
General Site Requirements
This section describes the requirements your site must meet for safe installation and operation of your 
router. Ensure that the site is properly prepared before you begin the installation. If you experience 
shutdowns or unusually high error rates with your existing equipment, the information in this section...

 
2-5
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
OL-6425-03
Chapter 2      Preinstallation Requirements
  Installation Checklist
For more information about antenna coverage and optimal usage, see the following documents:
 Cisco Multiband Swivel-Mount Dipole Antenna
 Cisco Multiband Diversity Omnidirectional Ceiling-Mount Antenna
 Cisco Multiband Wall-Mount, Corner-Mount, or Mast-Mount Antenna
Site Configuration
The following precautions will help you plan an...

 
2-6
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
OL-6425-03
Chapter 2      Preinstallation Requirements
  Creating a Site Log
Creating a Site Log
Use a Site Log to keep a record of all actions related to the router. Keep it in an accessible place near 
the chassis so that anyone who performs tasks has access to it. Use the Installation Checklist to verify 
steps in the installation and maintenance of the router. Site Log entries might include the following...

 
2-7
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
OL-6425-03
Chapter 2      Preinstallation Requirements
  Inspecting the Router
Inspecting the Router
Do not unpack the router until you are ready to install it. If the final installation site will not be ready 
for some time, keep the chassis in its shipping container to prevent accidental damage. Unpack the router 
only when you are ready to install it.
The router, cables, publications, and any optional equipment...

 
2-8
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
OL-6425-03
Chapter 2      Preinstallation Requirements
  Required Tools and Equipment for Installation and Maintenance
 Ethernet cables for connection to the Fast Ethernet WAN and LAN ports
NoteFor more information on cable specifications, see the online document Cisco Modular 
Access Router Cable Specifications on Cisco.com.
 Ethernet hub or PC with a network interface card for connection to a Fast Ethernet (LAN)...

CH A P T E R
 
3-1
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
OL-6425-03
3
Chassis Installation Procedures
This chapter describes how to install your Cisco 1800 series fixed-configuration router on a desktop or 
on a wall. It includes the following sections:
 Setting Up the Chassis, page 3-1
 Installing the Chassis Ground Connection, page 3-3
NoteTo see translations of the warnings that appear in this publication, see the Regulatory Compliance and 
Safety...

 
3-2
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
OL-6425-03
Chapter 3      Chassis Installation Procedures
  Setting Up the Chassis
CautionTo prevent damage to the chassis, never attempt to lift or tilt the chassis by holding the plastic panel on 
the front. Always hold the chassis by the metal body.
Setting a Cisco 1800 Series Fixed-Configuration Router on a Desktop
You can place Cisco 1800 series fixed-configuration routers on a desktop or shelf. Do not place...