Cisco 3560 Poe8 Manual

CH A P T E R
 
1-1
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
1
Product Overview
The Catalyst 3560 switch—also referred to as the switch—is an Ethernet switch to which you can 
connect devices like workstations, Cisco Wireless Access Points, Cisco IP Phones, and other network 
devices such as servers, routers, and other switches. This chapter provides a functional overview of the 
Catalyst 3560 switch. These topics are included:
Setting Up the Switch, page 1-1
Features, page 1-1
Front...

 
1-2
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Features
Supported SFP modules:
100BASE-BX10 (only Catalyst 3560 8- and 12-port switches)
100BASE-FX
100BASE-LX (only Catalyst 3560 8- and 12-port switches)
1000BASE-BX10
1000BASE-LX 
1000BASE-SX 
1000BASE-T (only Catalyst 3560 24- and 48-port switches)
1000BASE-ZX 
Coarse Wavelength-Division Multiplexing (CWDM)
SFP module patch cable. (CAB-SFP-50CM=.) Switches running Cisco  IOS Release 12.2(25)SEB or...

 
1-3
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Front Panel Description
Configuration:
For 10/100 and 10/100/1000 ports, the speed and duplex settings are autonegotiated.
For 10/100 and 10/100/1000 ports, PoE settings are autonegotiated.
For 1000BASE-T SFP module ports, the speed and duplex settings are autonegotiated.
Front Panel Description
Fast Ethernet Switch Front Panel Descriptions, page 1-3
Gigabit Ethernet Switch Front Panel Descriptions, page...

 
1-4
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Front Panel Description
The 10/100 ports on the switch are grouped in pairs. The first member of the pair (port 1) is above the 
second member (port 2) on the left, as shown in Figure 1-2. Port 3 is above port 4, and so on. The SFP 
module slots are numbered 1 and 2.
Figure 1-2 Catalyst 3560-24TS-S, 3560V2-24TS, and 3560V2-24TS-SD Switch Front Panel
The 10/100 PoE ports on the switch are grouped in pairs....

 
1-5
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Front Panel Description
The 10/100 ports on the switch are grouped in pairs. The first member of the pair (port 1) is above the 
second member (port 2) on the left, as shown in Figure 1-4. Port 3 is above port 4, and so on. The SFP 
module slots are numbered 1 to 4.
Figure 1-4 Catalyst 3560-48TS-S and 3560V2-48TS Switch Front Panel
The console port, 10/100 PoE ports, and a dual-purpose port are on the front...

 
1-6
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Front Panel Description
Figure 1-6 Catalyst 3560-12PC-S Switch Front Panel
Gigabit Ethernet Switch Front Panel Descriptions
Catalyst 3560G-24PS Switch Front Panel, Figure 1-7 on page 1-6
Catalyst 3560G-24TS Switch Front Panel, Figure 1-8 on page 1-7
Catalyst 3560G-48PS Switch Front Panel, Figure 1-9 on page 1-7
Catalyst 3560G-48TS Switch Front Panel, Figure 1-10 on page 1-8
The 10/100/1000 PoE ports on the...

 
1-7
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Front Panel Description
The 10/100/1000 ports on the Catalyst 3560-24TS switch are grouped in pairs. The first member of the 
pair (port 1) is above the second member (port 2) on the left, as shown in Figure 1-8. Port 3 is above 
port 4, and so on. The SFP module slots are numbered 25 to 28.
Figure 1-8 Catalyst 3560G-24TS Switch Front Panel
The 10/100/1000 PoE ports on the Catalyst 3560G-48PS switch are...

 
1-8
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Front Panel Description
The 10/100/1000 ports on the Catalyst 3560G-48TS switch are grouped in pairs. The first member of the 
pair (port 1) is above the second member (port 2) on the left, as shown in Figure 1-10. Port 3 is above 
port 4, and so on. The SFP module slots are numbered 49 to 52.
Figure 1-10 Catalyst 3560G-48TS Switch Front Panel
10/100 and 10/100/1000 Ports
You can set the 10/100 ports to...

 
1-9
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Front Panel Description
When you connect the switch to workstations, servers, routers, and Cisco  IP Phones, be sure that the 
cable is a straight-through cable. When you connect the switch to switches or hubs, use a crossover 
cable. When using a straight-through or crossover cable for 1000BASE-T connections, be sure to 
use a twisted four-pair, Category 5 cable for proper operation. Pinouts for the cables...

 
1-10
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Front Panel Description
Many legacy powered devices, including older Cisco IP phones and access points that do not fully 
support IEEE 802.3af, might not support PoE when connected to the switches by a crossover cable.
SFP Module Slots
See the release notes for the latest list of supported SFP modules.
SFP Modules
The switch uses Gigabit Ethernet SFP modules to establish fiber-optic and 1000BASE-T...