Cisco 3560 Poe8 Manual

 
1-11
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Front Panel Description
LEDs
You can use the switch LEDs to monitor switch activity and its performance. Figure 1-12 shows the 
switch LEDs and the Mode button that you use to select one of the port modes. 
All the LEDs described here are visible in the embedded device manager and Network Assistant GUIs. 
The switch online help describes how to use the device manager or Network Assistant to configure and...

 
1-12
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Front Panel Description
RPS LED 
NoteThe Catalyst 3560-8PC and Catalyst 3560-12PC-S switches do not have an RPS LED.
For more information about the Cisco RPS 2300 and the RPS 675, see the Cisco Redundant Power 
System 2300 Hardware Installation Guide and the Cisco RPS 675 Redundant Power System Hardware 
Installation Guide.
Ta b l e  1 - 3 R P S  L E D  
Color RPS Status
Off RPS is off or not properly...

 
1-13
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Front Panel Description
Port LEDs and Modes
The port LEDs, as a group or individually, display information about the switch and about the individual 
ports:
Even if the PoE mode is not selected, the PoE LED shows PoE problems when they are detected. The 
PoE LED applies only to Catalyst 3560 switches that support PoE.
To select or change a mode, press the Mode button until the desired mode is highlighted....

 
1-14
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Front Panel Description
Table 1-6 Meaning of Port LED Colors in Different Modes on the Switch 
Port Mode LED Color Meaning
PoE Off PoE is off.  
 
If the powered device is receiving power from an AC power source, the PoE port LED 
is off even if the powered device is connected to the switch port. 
Green PoE is on. The port LED is green only when the switch port is providing power.
Alternating green 
and...

 
1-15
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Rear Panel Description
Dual-Purpose Port LEDs
The LEDs on a dual-purpose port (see Figure 1-13) show whether the RJ-45 connector is connected or 
whether an SFP module is installed. You can configure each port as either a 10/100/1000 port through 
the RJ-45 connector or as an SFP module, but not both at the same time. The LEDs show how the port 
is being used.
The LED colors have the same meaning as...

 
1-16
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Rear Panel Description
The switch rear panel has an AC power connector, an RPS connector, and an RJ-45 console port. (See 
Figure 1-14, Figure 1-15, and Figure 1-16 for examples of the Catalyst 3560 rear panels.)
Figure 1-14 Catalyst 3560-24PS and 3560-48PS Switch Rear Panel
Figure 1-15 Catalyst 3560G-24PS, 3560G-48PS, 3560G-24TS, and 3560G-48TS Switch Rear Panel
1RJ-45 console port3RPS connector
2AC power...

 
1-17
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Rear Panel Description
Figure 1-16 Catalyst 3560V2-24PS, 3560V2-48PS, 3560V2-24TS, 3560V2-48TS Switch Rear Panel
Figure 1-17 Catalyst 3560V2-24TS-SD Switch Rear Panel
1RJ-45 console port3RPS connector
2Fan exhaust4AC power connector
274670CONSOLE
12
34
1RJ-45 console port3RPS connector
2Fan exhaust4DC power connector
274671CONSOLE
12
34 

 
1-18
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Rear Panel Description
The Catalyst 3560-8PC and Catalyst 3560-12PC-S rear panels have an AC power connector and heat 
sinks. (See Figure 1-18.)
Figure 1-18 Catalyst 3560-8PC and Catalyst 3560-12PC-S Switch Rear Panel
Internal Power Supply
An internal power supply powers the switch. The internal power supply is an autoranging unit that 
supports input voltages between 100 and 240 VAC. Use the supplied AC...

 
1-19
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Rear Panel Description
Cisco RPS
Depending on the switch model, you can connect the switch to either of these Cisco redundant power 
systems (RPS) to provide backup power if the switch power supply fails:
“Cisco RPS 2300” section on page 1-19
“Cisco RPS 675” section on page 1-19
Connect the switch and the Cisco RPS to the same AC power source. Use the RPS connector cable 
supplied with the RPS to connect...

 
1-20
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Chapter 1      Product Overview
Management Options
Security Slots
The Catalyst 3560-8PC and the Catalyst 3560-12PC-S switches have security slots on the left and right 
side panels. You can install an optional cable lock, such as that used to secure a laptop, to secure either 
or both sides of the switch.
Figure 1-19 shows the slot on a left-side panel. 
Figure 1-19 Switch Left Panel
Management Options
The Catalyst 3560 switches offer...