Cisco Sg2008 Manual

Administration
LLDP-MED
Cisco Small Business SG200 Series 8-port Smart Switch81
3
 
•Cisco-specific device description (csco-sb)—This service enables clients 
to discover Cisco switches and other products deployed in small business 
networks.
•Management user interfaces—This service identifies the management 
interface available on the switch (HTTP). 
When a Bonjour-enabled switch is attached to a network, any Bonjour client can 
discover and get access to the management interface without prior...

Administration
LLDP-MED
Cisco Small Business SG200 Series 8-port Smart Switch82
3
 
The switch supports the LLDP Media Endpoint Discovery (LLDP-MED) extensions 
to the LLDP protocol. LLDP-MED enables auto-discovery of LAN policies, device 
location, and other device characteristics, and automates management of Power-
over-Ethernet (PoE) endpoints.
Se e the following topic s for more information on the configuration pages available 
in the Administration > Discovery - LLDP menu:
•Configuring Global...

Administration
LLDP-MED
Cisco Small Business SG200 Series 8-port Smart Switch83
3
 
•Coordinates—Switch GPS coordinates in hexadecimal format.
•ELIN Address—The ELIN number.
•Country—Country where the city is located. This is a two-character code as 
defined by ISO 3166.
•City—City where the street is located.
•Street—Street where the building is located.
•Building—Building in which the switch is located.
NOTE: The City, Street, and Building fields share the maximum character 
limitation; i.e., an entry...

Administration
LLDP-MED
Cisco Small Business SG200 Series 8-port Smart Switch84
3
 
STEP  4Select the Available TLVs that you want the port to include in LLDP 
advertisements:
•Network Policy—VLAN ID, the 802.1p class-of-service value, and the 
Differentiated Services Code Point (DSCP) value. This information is used to 
implement the Voice VLAN feature (see Voic e and Me di a).
•Location—This value could include the hexadecimal GPS location 
coordinates for the switch, the civic address, or the ELIN...

Administration
LLDP-MED
Cisco Small Business SG200 Series 8-port Smart Switch85
3
 
LLDP-MED Port Status Details
The LLDP-MED Por t Status Details page displays the LLDP-MED configuration for 
all ports on which the feature is enabled. To display this page, click 
Administration> Discovery - LLDP-MED > LLDP-MED Port Status Details in 
the navigation window.
Select a port from the Port list. The Network Policies Table shows the fields for 
each service or policy advertised through LLDP:
•Media Policy...

Administration
LLDP-MED
Cisco Small Business SG200 Series 8-port Smart Switch86
3
 
•Management Address—The management interface IP address (see the 
IPv4 Interface page or the IPv6 Interface page).
•Port ID SubType—The type of the port identifier.
•Port ID—The port identifier.
•Port Description—The port description.
•System Capabilities Enabled—The capabilities that are enabled on the 
switch.
•System Capabilities Supported—The capabilities that are currently 
advertised as supported by the switch.
The...

Administration
LLDP-MED
Cisco Small Business SG200 Series 8-port Smart Switch87
3
 
LLDP-MED Neighbor Information
The Neighbor Information page displays information received from other LLDP-
MED-capable devices in the network. To display this page, click Administration> 
Discovery - LLDP-MED > Neighbor Information in the navigation window.
The Neighbor Information Table displays the following fields for each LLDP 
neighbor device for which an advertisement has been received:
•Local Port—Port number of...

Administration
LLDP-MED
Cisco Small Business SG200 Series 8-port Smart Switch88
3
 
Inventory
•Hardware Revision—Switch hardware revision ID.
•Firmware Revision—Switch firmware revision number.
•Software Revision—Switch software revision number.
•Manufacturer Name—Switch manufacturer name.
•Model Name—Switch model name.
•Asset ID—LLDP-MED asset ID for the switch.
Location
•Subtype—Select one of the following options to configure how the switch 
location is identified in TLVs:
-Coordinate Based—Switch...

Administration
Configuring DHCP Client Vendor Options
Cisco Small Business SG200 Series 8-port Smart Switch89
3
 
•PoE Power Priority—Displays High, Low, or Critical to indicate how the 
port is prioritized when there is less PoE power to deliver than requested by 
all powered devices.
Configuring DHCP Client Vendor Options
You can configure the DHCP client functionality on the switch to include vendor 
information in its DHCP requests (DHCP option 60). A DHCP server might use 
vendor information to...

4
Cisco Small Business SG200 Series 8-port Smart Switch90
 
Port Management
This chapter describes how to configure switch port settings, combine ports into 
link aggregation groups, and configure port power features.
The following topics are included:
•Configuring Port Settings
•Link Aggregation
•Configuring PoE
•Green Ethernet
Configuring Port Settings
The Por t Settings page enables you to administratively enable and disable ports 
and to configure autonegotiation of port speed and duplex mode. You...