Home > Cobra > Radio > Cobra_148nwst Cb Tranciever_manual

Cobra_148nwst Cb Tranciever_manual

Add to Favourites
    Download as PDF

    View the Cobra_148nwst Cb Tranciever_manual for free. All the Cobra manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 How to Use Your Cobra 148 NW STContents Features..................................................................................................1 The CB Story.........................................................................................A1 FCC Regulations FCC Warnings Included Accessories Controls & Indicators.......................................................................A2 Our Thanks to You.............................................................................A3 SoundTracker™...
    Page 2 Installation Installation Location32 Mounting and ConnectionMounting and Connection Hold the radio with the mounting bracket in the exact desired location.If there is no inter- ference, remove the bracket and use it as a template to mark the location for the mount- ing screws.Location Plan location of transceiver and microphone bracket before starting the installation. Select a location that is convenient for operation, yet does not inte rfe re with the dri ver or passenger. The transceiver is usually...
    Page 3 Installation Installation54Note Connecting to an accessory fuse prevents the unit from being left on accidentally,and also per- mits operating the unit without running the engine. Note In positive ground vehicles the red wire goes to the chassis and the black wire is connected to the ignition switch. Note Before installing the CB radio, visually check the vehicle’s battery connection to deter- mine which terminal,positive or negative,is grounded (pos- itive is the larger of the two) to the engine block...
    Page 4 Ignition Noise Interference AntennasUse of a mobile receiver at low signal levels is normally limited by the presence of electrical noise. The primary source of noise in automobiles is from the alternator and ignition system. Typically,when signal level is adequate,the back- ground noise does not present a serious problem. Also,when extremely low level signals are being received,the transceiver may be operated with the vehicle’s engine turned off. The unit requires very little current and therefore will...
    Start reading Cobra_148nwst Cb Tranciever_manual

    Related Manuals for Cobra_148nwst Cb Tranciever_manual

    All Cobra manuals