Comdial Dxp Digitech Telephone User Card Manual

							Personal Speed Dials 
1. PresslTCM+#%i. 
2. Press a programmable button (memory code 
location). 
3. Select line button or dial line group 01 - 16. 
4. Dial number to be stored (up to 16 digits). 
l Digits O-9, +, # can be stored. 
l tdookflash can be stored by pressing TAP. 
l Pause can be stored by pressing HOLD. 
5. Press TRANSCONF and repeat steps 2-4 to 
program another autodial button, or press 
MNTR (SPKR) to quit. 
6. Log secondary stored numbers in directory. 
DSS and Fea tore Codes 
1. Press ITCM G# X 3. 
2. Press programmable button. 
3 Dial extension or feature code 
4. Repeat 2 and 3 as required. 
5 Press MNTR (SPKR) to quit. 
Response Messaging 
1. Press ITCM * ?+ 6. 
2, Press a programmable button. 
3. Dial message location number (91-30). 
4. Press #. 
5. Press MNTR (SPKR) to quit. 
Personal Speed Dial Numbers 
(Upper Button Groupin& 
Personal Speed Dial Number 
(Keypad Buttons) 
Personal Speed Dial Numbers 
(Lower Button Grouping) 
LCD Messaging 
Line Group Access EXClllSiVE HOLD, HOLD 
Set 
ITCM #c 02 Message I 
Group 1 ITCM 9 
4nswer Page 
( ITCM 78 
Message Waiting 
Night Transfer Set ITCM #? 3 Ext. 
Cancel ITCM # 3 Ext. 
OfI 
ITCM*# O&O31 
(Attendant Only) 
Off lTCM.# OS032 
Paging 
All Call ITCM 70 
Zone 3-R ITCM 71.77 
-, . . Personal Ringing Tones Set ITCM c+c &4 (i-4) 
Service Observing 
CC3Wd ITCM # 03 Ext. 
Speed Dial 
Station 1-o 
System * 100-g 299 
Redial 
On # 
Line Pidwp- 
Zone 1 
ITCM 65 
From Any 
Zone 2 ITCM 66 
Station 
Zone 3 ITCM 67 
Charlottesville Vimin:- q-n-- .d 266 
Printed 70-l 97.02 
11191 
COMDIAL 
DXP Digital 
Communications 
Systems 
Station User’s 
Guide for 
DigiTech Telephones  
						

							Line Gro&~p Access 
l Lift handset. 
l Press ITCM. 
0 Diil Group Access Code: 
9 = Group 1 
81-89 = Groups 2-11 
,* Dial telephone number. 
Persona/ Speed Dial 
While station is idle, 
l Press keypad digit 0 - 9 (see directory). 
‘ 
System Speed Dial 
While station is idle, 
l Press t and one, two, or three digits as 
required by system programming (see atten- 
dant for system speed dial list). 
Last Number Redial 
While station is idle, 
l Press #. 
Auto-Redial 
While station is idle, 
l Press assigned auto-redial button. 
Cal Park 
Standard 
l Lift handset. 
l Press flashing line or ITCM button 
l Talk. 
Speakerphone 
l Press flashing line or ITCM button. 
l Talk. 
Station with Ringing Line Preference 
With calls ringing at this station, 
l Lift handset. 
l Talk. 
Call Pickup - Directed 
l Press ITCM * 4. 
l Dial station number (of ringing station). 
Call Pickup - Group 
l Press ITCM # 4. 
Standard 
l Lift handset. 
l Select line or ITCM button. 
l Dial number or press autodial button. 
l Talk. 
Speakerphone 
l Press line or ITCM button. 
l Dial number or press autodial button, 
l Talk. 
Voice Announce 
l Lift handset. 
l Press DSS (or press ITCM and dial station 
number). 
l Make announcement. 
$creened Transfer 
l Press TRANSKONF. 
l Press DSS (or press ITCM and dial station 
number). 
l When intercom number party answers, an- 
nounce call, 
l Hang up handset. 
Unscreened Transfer 
l Press TRANWCONF. 
l Press DSS (or press ITCM and dial station 
number). 
. Hang up. Multiline cmference (2 external parties,, 1 iinter- 
nal party) 
To set up, 
l Establish first outside call and ,press 
TRANSKONF. 
l Establish second outside call and press 
TRANSICONF. 
l Talk. 
Add-on conference (1 external party, 2 internal 
parties) 
l Establish outside call. 
l Press TRANSKONF. 
l Dial personal intercom number of party or 
press DSS. 
l Wait for answer. 
l Press TRANSKONF (a three-way connec- 
tion is established). 
Five -Party Conference (up to five parties-either 
intercom numbers or lines) 
To set up, 
l Establish first call. 
l Press TRANSKONF. 
l Establish second call. 
l Press TRANWCONF. Conference is active. 
l Repeat above steps for up to four parties plus 
your station. 
To remain active with one conferee, 
l Stay on line when one party hangs up. 
To set, 
l While on line, press HOLD for regular HOLD. 
l While on line, press HOLD + HOLD for ex- 
clusive HOLD. 
To retrieve, press flashing line button or TAP. 
Hold Queuing 
Place multiple calls on hold by pressing HOLD 
after taking each call. 
To retrieve, 
l Press line button or HOLD to scroll held calls 
(on LCD display). 
l Press TAP to retrieve displayed call. To set, 
l While on line,, ,pmss ITCM. 
l Press *. 
. Select a parkroae 
@l - 99). 
To retrieve (from arry &on), 
l Press ITCM. 
l Press #. 
l Select a park zone ,(91 - 99). 
Zone 
To originate, 
l Lift handset. 
l Press ITCM + zone number (71, 72, 73, 74, 
75,76,77). 
l Make announcement. 
l Stay on page (if waiting for answer back). 
All-Call (If programmed) 
To originate, 
. Lift handset. 
l Press ITCM + 70. 
l Make announcement. 
l Stay on page (if waiting for answer back). 
Meet-Me Page (Answerback of Page) 
l Lift handset (of nearest station). 
l Press ITCM + 78. 
l Talk. 
External 
l Lift handset. 
l Dial assigned page access code. 
-or- 
* Press page button. 
NOTE: External page is assigned to one of 
the eight page zones. 
GCA70-196 - 199