compaq contura 400 family User Manual
Here you can view all the pages of manual compaq contura 400 family User Manual. The Compaq manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 11
To replace the display assembly, the assembly must be removed from the system unit module. This is done by removing the keyboard assembly, disconnecting the display cable and display ground cable from the system unit module, removing the tilt feet and handle brackets, removing the rear clutch screws, and lifting off the display assembly. To service display components, do not remove the display assembly from the system unit module (unless the display enclosure or clutch replacement is required). Access...
Page 12
Chapter 1.5 Docking Base The docking base includes the following replaceable parts: o Battery door o Feet o Handle
Page 13
Chapter 1.6 Monitor Support Cover The monitor support cover is used with the docking base. The foot on the monitor support cover is the only replaceable part.
Page 14
Chapter 1.7 System Unit Module Parts
Page 15
Table 1-2. System Unit Module -- Models 400 and 410 =========================================================================== Spare Part Description Number Notes =========================================================================== 1. Base enclosure 147856-001 Includes: a. PC Card eject levers, pin, door, and spring b. battery latch button and spring c. handle bracket, screws and washers d. battery shield, insulator e. tilt foot and screws f. warning label * g. anti-skid pads * h. memory door *...
Page 16
5. Processor upgrade 486 DX2/50 MHz 169644-001 --------------------------------------------------------------------------- 6. Real-time clock battery 117099-001 --------------------------------------------------------------------------- 7. Mechanical Trackball 147876-001 --------------------------------------------------------------------------- 8. PC Card ejection Includes the following and screws *. assembly 147871-001 a. rails b. clip c. screws *...
Page 17
Table 1-3. System Unit Module -- Models 420 and 430 =========================================================================== Spare Part Description Number Notes =========================================================================== 1. Base enclosure 189239-001 Includes: a. PC Card eject levers, pin, door, and spring b. battery latch button and spring c. handle bracket, screws and washers d. battery shield, insulator e. tilt foot and screws f. warning label * g. anti-skid pads * h. memory door *...
Page 18
--------------------------------------------------------------------------- 3. Diskette drive bracket 189240-001 --------------------------------------------------------------------------- 4. Diskette drive 147963-001 --------------------------------------------------------------------------- 5. Real-time clock battery 117099-001 --------------------------------------------------------------------------- 6. Optical Trackball assembly 189197-001...
Page 19
Table 1-4. Monochrome Display Assembly -- Models 400 and 410 =========================================================================== Description Spare Part Number Notes =========================================================================== 1. Display bezel 147882-001 2. Backlight inverter board 147622-001 3. Display panel 147877-001 Includes labels and shield 4. Display cables 147884-001 Includes: a. display cable b. display ground cable 5. Display clutch 147858-001 Includes screws for handle...
Page 20
Chapter 1.9 Color STN (9.5 inch) Display Assembly Parts Table 1-5. CSTN (9.5 inch) Display Assembly -- Models 400 and 410 =========================================================================== Description Spare Part Number Notes =========================================================================== 1. Display bezel 147883-001 2. Backlight inverter board 147624-001 3. Display panel 147878-001 Includes labels and shield 4. Display cables 147884-001 Includes: a. display cable b. display ground...