D-Link Dir655 B1 Manual

27D-Link DIR-655 User Manual
Section 3 - Configuration
Check  the  box  to  enable  the  wireless  function.  If  you  do  not  want  to  use  wireless, 
uncheck the box to disable all the wireless functions.
The schedule of time when the wireless settings rules will be enabled. The schedule 
may be set to Always, which will allow the particular service to always be enabled. 
You can create your own times in the Tools > Schedules section.
Service Set Identifier (SSID) is the name of your wireless...

28D-Link DIR-655 User Manual
Section 3 - Configuration
Wireless Security
This section will show you the different levels of security you can use to protect your data from intruders. The 
DIR-655 offers the following types of security:
• WPA2™ (Wi-Fi Protected Access 2)    • WPA2-PSK (Pre-Shared Key)
• WPA™ (Wi-Fi Protected Access)    • WPA-PSK (Pre-Shared Key)
What is WPA?
WPA, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent...

29D-Link DIR-655 User Manual
Section 3 - Configuration
Wireless Network Setup Wizard
To run the security wizard, click on Setup at the top and then click Wireless 
Network Setup Wizard.
Click Next to continue.  

30D-Link DIR-655 User Manual
Section 3 - Configuration
The  following  screen  will  show  you  your  Pre-Shared  Key  to  enter  on  your 
wireless clients. 
Click Save to finish the Security Wizard.
If you selected WPA-Enterprise, the RADIUS information will be displayed. Click Save to finish the Security Wizard.  

31D-Link DIR-655 User Manual
Section 3 - Configuration
Configure WPA-Personal (PSK)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before 
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based configuration by opening a web browser and entering 
the IP address of the router (192.168.0.1). Click on Setup and then click Wireless...

32D-Link DIR-655 User Manual
Section 3 - Configuration
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before 
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based configuration by opening a web browser and 
entering  the  IP  address  of  the  router  (192.168.0.1).  Click  on  Setup 
and then click Wireless Settings on the left...

33D-Link DIR-655 User Manual
Section 3 - Configuration
9. If the MAC Address Authentication box is selected then the user will 
need to connect from the same computer whenever logging into 
the wireless network.
10.  Click Advanced to enter settings for a secondary RADIUS Server.
11.  Click Apply Settings to save your settings.  

34D-Link DIR-655 User Manual
Section 3 - Configuration
From the Setup > Wireless Settings screen, click Add Wireless Device with 
WPS.
Add Wireless Device with WPS Wizard
If you select Manual, a settings summary screen will appear. Write down the 
security key and enter this on your wireless clients. Click OK to finish.
Select Auto  to  add  a  wireless  client  using WPS  (Wi-Fi  Protected  Setup)  and 
then click Next. Skip to the next page.   

35D-Link DIR-655 User Manual
Section 3 - Configuration
PIN:  Select  this  option  to  use  PIN  method.  In  order  to  use  this  method  you 
must know the wireless client’s 8 digit PIN and click Connect.
PBC: Select  this  option  to  use  PBC  (Push  Button)  method  to  add  a  wireless 
client. Click Connect.
Once  you  click Connect,  you  will  have  a  120  second  time  limit  to  apply  the 
settings to your wireless client(s) and successfully establish a connection.   

36D-Link DIR-655 User Manual
Section 3 - Configuration
Network Settings
Enter the IP address of the router. The default IP address 
is 192.168.0.1.
If you change the IP address, once you click Apply, you 
will need to enter the new IP address in your browser to 
get back into the configuration utility.
Enter  the  Subnet  Mask.  The  default  subnet  mask  is 
255.255.255.0.
Enter the Domain name (Optional).
Uncheck the box to transfer the DNS server information 
from  your  ISP  to  your  computers.  If...